Sharp Mx 3501 N Manual
Have a look at the manual Sharp Mx 3501 N Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
135 COPYING IN THE CENTER OF THE PAPER (Centering) This is used to center the copied image on the paper. This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the image is reduced. Not using the centering functionUsing the centering function 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Touch the [Special Modes] key. 3 Select Image Edit. (1) Touch the keys to switch through the screens. (2) Touch the [Image Edit] key. 4 Select Centering. (1) Touch the [Centering] key so that it is highlighted. (2) Touch the [OK] key. When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode. 1 1 Ready to scan for copy. 2-Sided CopyOriginal 8 x111 / 2 0 Output Special Modes File Quick File Full ColorColor Mode 2.3.4. 1.8 x11R8 x1411x17 8 x11AutoExposure 100%Copy Ratio Job Detail Settings 1 / 2 1 / 2 1 / 28 x11Plain1 / 2 Special ModesOK Stamp Quick File Image Edit File Color Adjustments Proof Copy 3/4 (1)(2) Image EditOK Photo RepeatMirror Image Centering Multi-Page Enlargement 11x17 Full BleedB/W Reverse (2)(1)
136 5 Press the [COLOR START] key ( ) or the [BLACK & WHITE START] key (). Copying will begin. If the originals were placed in the document feeder tray, the originals are copied. If you are using the document glass, copy each page one page at a time. If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals. To cancel scanning of the original and copying... Press the [STOP] key ( ). The image can be reduced when using the Centering function, but not enlarged. When the original size or the paper size is displayed as a special size, this function cannot be used. To cancel centering... Touch the [Centering] key in the screen of step 4 so that it is not highlighted. or
137 REVERSING BLACK AND WHITE IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. This function can only be used for black and white copying. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Touch the [Special Modes] key. 3 Select Image Edit. (1) Touch the keys to switch through the screens. (2) Touch the [Image Edit] key. 4 Select B/W Reverse. (1) Touch the [B/W Reverse] key so that it is highlighted. (2) Touch the [OK] key. When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode. Originals B/W Reverse copy 1 1 Ready to scan for copy. 2-Sided CopyOriginal 8 x111 / 2 0 Output Special Modes File Quick File Full ColorColor Mode 2.3.4. 1.8 x11R8 x1411x17 8 x11AutoExposure 100%Copy Ratio Job Detail Settings 1 / 2 1 / 2 1 / 28 x11Plain1 / 2 Special ModesOK Stamp Quick File Image Edit File Color Adjustments Proof Copy 3/4 (1)(2) Image EditOK Photo RepeatMirror Image Centering Multi-Page Enlargement 11x17 Full BleedB/W Reverse (2)(1)
138 5 Press the [BLACK & WHITE START] key (). Copying will begin. If the originals were placed in the document feeder tray, the originals are copied. If you are using the document glass, copy each page one page at a time. When using this function, the [COLOR START] key ( ) cannot be used. To cancel scanning of the original and copying... Press the [STOP] key ( ). When this function is selected, the exposure mode setting automatically changes to Text. To cancel B/W reverse... Touch the [B/W Reverse] key in the screen of step 4 so that it is not highlighted.
139 ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue). For an image adjustment example, see Adjusting red/green/blue in copies (RGB Adjust) in the Quick Start Guide. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Touch the [Special Modes] key. 3 Select Color Adjustments. (1) Touch the keys to switch through the screens. (2) Touch the [Color Adjustments] key. 4 Touch the [RGB Adjust] key. 1 1 Ready to scan for copy. 2-Sided CopyOriginal 8 x111 / 2 0 Output Special Modes File Quick File Full ColorColor Mode 2.3.4. 1.8 x11R8 x1411x17 8 x11AutoExposure 100%Copy Ratio Job Detail Settings 1 / 2 1 / 2 1 / 28 x11Plain1 / 2 Special ModesOK Stamp Quick File Image Edit File Color Adjustments Proof Copy 3/4 (1)(2) Color AdjustmentsOK Color Balance Sharpness Brightness Suppress Background Intensity RGB Adjust
140 5 Adjust red, green, or blue. (1) Touch the key of the color that you wish to adjust: [R (Red)], [G (Green)], or [B (Blue)]. Only one color can be adjusted. (If you adjust one color and then adjust another color, the adjustment of the first color is canceled.) (2) Adjust the selected color. Touch the [+] key to strengthen the selected color, or touch the [-] key to weaken the color. (3) Touch the [OK] key. When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode. 6 Press the [COLOR START] key ( ). Copying will begin. If the originals were placed in the document feeder tray, the originals are copied. If you are using the document glass, copy each page one page at a time. To cancel scanning of the original and copying... Press the [STOP] key ( ). To cancel the RGB adjust setting... Touch the [Cancel] key in the screen of step 5. Color Adjustments RGB AdjustOnly one color can be adjusted. OK OK R(Red)G(Green)B(Blue) Cancel (3)(2)(1)
141 ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness) This is used to sharpen an image or make it softer. For an image adjustment example, see Adjusting the sharpness of an image (Sharpness) in the Quick Start Guide. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Touch the [Special Modes] key. 3 Select Color Adjustments. (1) Touch the keys to switch through the screens. (2) Touch the [Color Adjustments] key. 4 Touch the [Sharpness] key. 5 Adjust the image. (1) Touch the [Soft] key or the [Sharp] key. (2) Touch the [OK] key. When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode. 1 1 Ready to scan for copy. 2-Sided CopyOriginal 8 x111 / 2 0 Output Special Modes File Quick File Full ColorColor Mode 2.3.4. 1.8 x11R8 x1411x17 8 x11AutoExposure 100%Copy Ratio Job Detail Settings 1 / 2 1 / 2 1 / 28 x11Plain1 / 2 Special ModesOK Stamp Quick File Image Edit File Color Adjustments Proof Copy 3/4 (1)(2) OK Color Balance Sharpness Brightness Suppress Background Intensity Color Adjustments RGB Adjust Color Adjustments Sharpness OK OKCancel SharpSoft (1)(2)
142 6 Press the [COLOR START] key ( ). Copying will begin. If the originals were placed in the document feeder tray, the originals are copied. If you are using the document glass, copy each page one page at a time. To cancel scanning of the original and copying... Press the [STOP] key ( ). To cancel the sharpness setting... Touch the [Cancel] key in the screen of step 5.
143 WHITENING FAINT COLORS IN COPIES (Suppress Background) This feature is used to suppress light background areas. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Touch the [Special Modes] key. 3 Select Color Adjustments. (1) Touch the keys to switch through the screens. (2) Touch the [Color Adjustments] key. 4 Touch the [Suppress Background] key. Level [+] Level [-] The lightness level at which suppression takes place can be adjusted. Light areas are suppressed. 1 1 Ready to scan for copy. 2-Sided CopyOriginal 8 x111 / 2 0 Output Special Modes File Quick File Full ColorColor Mode 2.3.4. 1.8 x11R8 x1411x17 8 x11AutoExposure 100%Copy Ratio Job Detail Settings 1 / 2 1 / 2 1 / 28 x11Plain1 / 2 Special ModesOK Stamp Quick File Image Edit File Color Adjustments Proof Copy 3/4 (1)(2) OK Color Balance Sharpness Brightness Suppress Background Intensity Color Adjustments RGB Adjust
144 5 Select suppress background settings. (1) Adjust the background suppression level. To strengthen the background suppression level (suppress darker backgrounds), touch the [-] key. To weaken the level (suppress only light backgrounds), touch the [+] key. (2) Touch the [OK] key. When the [OK] key is touched, you will return to the special mode screen. Touch the [OK] key to return to the base screen of the copy mode. 6 Press the [COLOR START] key ( ). Copying will begin. If the originals were placed in the document feeder tray, the originals are copied. If you are using the document glass, copy each page one page at a time. To cancel scanning of the original and copying... Press the [STOP] key ( ). To cancel the Suppress background setting... Touch the [Cancel] key in the screen of step 5. Suppress Background Light areas of the original may be suppressed as background. OK OKCancel Color Adjustments (1) (2)