Sharp Mx 4100n Owners Manual
Have a look at the manual Sharp Mx 4100n Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 236
2-115
COPIER
Contents
COPYING IN THE CENTER OF THE PAPER (Centering)
This is used to center the copied image on the paper.
This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centering functionUsing the centering function
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2)...](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-235.png "Page 236
2-115
COPIER
Contents
COPYING IN THE CENTER OF THE PAPER (Centering)
This is used to center the copied image on the paper.
This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centering functionUsing the centering function
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2)...")
![Page 237
2-116
COPIER
Contents
The image can be reduced when using the centering function, but not enlarged.
When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centering...
Touch the [Centering] key in the screen of step 3 so that it is not highlighted.](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-236.png "Page 237
2-116
COPIER
Contents
The image can be reduced when using the centering function, but not enlarged.
When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centering...
Touch the [Centering] key in the screen of step 3 so that it is not highlighted.")
![Page 239
2-118
COPIER
Contents
When this function is selected, the Original Image Type setting for exposure adjustment automatically changes to Text.
To cancel B/W reverse...
Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted.](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-238.png "Page 239
2-118
COPIER
Contents
When this function is selected, the Original Image Type setting for exposure adjustment automatically changes to Text.
To cancel B/W reverse...
Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted.")
![Page 240
2-119
COPIER
Contents
[Color Adjustments] KEY
When the [Color Adjustments] key is touched in the 2nd special modes menu screen, the color adjustments menu
screen opens.
Color adjustments menu screen
(1) [RGB Adjust] key
☞ADJUSTING RED/GREEN/BLUE IN COPIES (RGB
Adjust) (page 2-120)
(2) [Sharpness] key
☞ADJUSTING THE SHARPNESS OF AN IMAGE
(Sharpness) (page 2-121)
(3) [Suppress background] key
☞WHITENING FAINT COLORS IN COPIES
(Suppress Background) (page 2-122)(4) [Color Balance] key
☞ADJUSTING THE...](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-239.png "Page 240
2-119
COPIER
Contents
[Color Adjustments] KEY
When the [Color Adjustments] key is touched in the 2nd special modes menu screen, the color adjustments menu
screen opens.
Color adjustments menu screen
(1) [RGB Adjust] key
☞ADJUSTING RED/GREEN/BLUE IN COPIES (RGB
Adjust) (page 2-120)
(2) [Sharpness] key
☞ADJUSTING THE SHARPNESS OF AN IMAGE
(Sharpness) (page 2-121)
(3) [Suppress background] key
☞WHITENING FAINT COLORS IN COPIES
(Suppress Background) (page 2-122)(4) [Color Balance] key
☞ADJUSTING THE...")
![Page 241
2-120
COPIER
Contents
ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)
This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue).
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Color Adjustments] key.
(4) Touch the [RGB Adjust] key.
☞[Color Adjustments]...](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-240.png "Page 241
2-120
COPIER
Contents
ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)
This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue).
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Color Adjustments] key.
(4) Touch the [RGB Adjust] key.
☞[Color Adjustments]...")
![Page 242
2-121
COPIER
Contents
ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness)
This is used to sharpen an image or make it softer.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Color Adjustments] key.
(4) Touch the [Sharpness] key.
☞[Color Adjustments] KEY (page 2-119)
3
Adjust the image.
(1) Touch the [Soft] key or...](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-241.png "Page 242
2-121
COPIER
Contents
ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness)
This is used to sharpen an image or make it softer.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Color Adjustments] key.
(4) Touch the [Sharpness] key.
☞[Color Adjustments] KEY (page 2-119)
3
Adjust the image.
(1) Touch the [Soft] key or...")
![Page 243
2-122
COPIER
Contents
WHITENING FAINT COLORS IN COPIES (Suppress
Background)
This feature is used to suppress light background areas.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Color Adjustments] key.
(4) Touch the [Suppress Background] key.
☞[Color Adjustments] KEY (page 2-119)
3
Select the suppress...](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-242.png "Page 243
2-122
COPIER
Contents
WHITENING FAINT COLORS IN COPIES (Suppress
Background)
This feature is used to suppress light background areas.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Color Adjustments] key.
(4) Touch the [Suppress Background] key.
☞[Color Adjustments] KEY (page 2-119)
3
Select the suppress...")
![Page 244
2-123
COPIER
Contents
4
Press the [COLOR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
To cancel a suppress background setting...
Touch the [Cancel] key in the screen of step 3.](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-243.png "Page 244
2-123
COPIER
Contents
4
Press the [COLOR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
To cancel a suppress background setting...
Touch the [Cancel] key in the screen of step 3.")
![Page 246
2-125
COPIER
Contents
3
Examples of color balance adjustment
Adjust the color balance.
(1) Select the color to be adjusted.
Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black).
If only the rectangular area around the letter in a key is
highlighted, the settings have been changed from the
factory default settings.
(2) Select the gradation to be adjusted.
Select the gradation with the keys.
Touch the keys to move the highlighting to one of
gradations 1 to 8 or All.
To adjust all eight...](http://img.usermanuals.tech/thumb/68/104798/w64_mx-4100n-owners-manual-1525696621_d-245.png "Page 246
2-125
COPIER
Contents
3
Examples of color balance adjustment
Adjust the color balance.
(1) Select the color to be adjusted.
Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black).
If only the rectangular area around the letter in a key is
highlighted, the settings have been changed from the
factory default settings.
(2) Select the gradation to be adjusted.
Select the gradation with the keys.
Touch the keys to move the highlighting to one of
gradations 1 to 8 or All.
To adjust all eight...")
2-120 COPIER Contents ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue). 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Color Adjustments] key. (4) Touch the [RGB Adjust] key. ☞[Color Adjustments] KEY (page 2-119) 3 Adjust red, green, or blue. (1) Touch the key of the color that you wish to adjust: [R (Red)], [G (Green)], or [B (Blue)]. Only one color can be adjusted. (If you adjust one color and then adjust another color, the adjustment of the first color is canceled.) (2) Adjust the selected color. Touch the [+] key to strengthen the selected color, or touch the [-] key to weaken the color. (3) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel an RGB adjust setting... Touch the [Cancel] key in the screen of step 3. R(Red)+ G(Green)+ B(Blue)+ OK OKCancel Color Adjustments RGB Adjust Only one color can be adjusted. R(Red)G(Green)B(Blue) 210-1-2 (1)(3)(2)
2-121 COPIER Contents ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness) This is used to sharpen an image or make it softer. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Color Adjustments] key. (4) Touch the [Sharpness] key. ☞[Color Adjustments] KEY (page 2-119) 3 Adjust the image. (1) Touch the [Soft] key or the [Sharp] key. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel the sharpness setting... Touch the [Cancel] key in the screen of step 3. Soft Sharp OK OKCancel Color Adjustments Sharpness SharpSoft (1)(2)
2-122 COPIER Contents WHITENING FAINT COLORS IN COPIES (Suppress Background) This feature is used to suppress light background areas. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Color Adjustments] key. (4) Touch the [Suppress Background] key. ☞[Color Adjustments] KEY (page 2-119) 3 Select the suppress background setting. (1) Adjust the background suppression level. Touch the [+] key to suppress only faint background. Touch the [-] key to suppress faint to dark background. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. Light areas are suppressed. Level [+] Level [-] The lightness level at which suppression takes place can be adjusted. OK OKCancel Color Adjustments Suppress Background Light areas of the original may be suppressed as background. 31 (1)(2)
2-123 COPIER Contents 4 Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel a suppress background setting... Touch the [Cancel] key in the screen of step 3.
2-124 COPIER Contents ADJUSTING THE COLOR (Color Balance) The color, tone, and density of color copies can be adjusted. Each of the colors yellow, cyan, magenta, and black are divided into 8 gradations from light to dark, and the average density of each gradation can be adjusted, or all eight gradations can be adjusted at once. OK OKCancel Color Adjustments Color Balance Y M C Bk 12345678All 12345678 Dark Light C Cyan+M Magenta+ Y Yellow+B Black+ 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Color Adjustments] key. (4) Touch the [Color Balance] key. ☞[Color Adjustments] KEY (page 2-119)
2-125 COPIER Contents 3 Examples of color balance adjustment Adjust the color balance. (1) Select the color to be adjusted. Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black). If only the rectangular area around the letter in a key is highlighted, the settings have been changed from the factory default settings. (2) Select the gradation to be adjusted. Select the gradation with the keys. Touch the keys to move the highlighting to one of gradations 1 to 8 or All. To adjust all eight gradations at once, move the highlighting to All. (3) Adjust the density. To darken the density of the selected gradation, touch the [+] key. To lighten the density, touch the [-] key. Each time one of the keys is touched, the indicator frame moves up or down one level. (4)To adjust other colors, repeat steps (1) to (3). (5) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. To return the color balance values to the default settings... Touch the key. The values of all eight gradations will return to the default color balance values. The default color balance values are set in Initial Color Balance Setting in the system settings (administrator). 4 Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel a color balance setting... Touch the [Cancel] key in the screen of step 3. System Settings (Administrator): Initial Color Balance Setting This is used to set the default values to which the color balance values return when the key is pressed. Y M C Bk 12345678 OK OKCancel Color Adjustments Color Balance All (1)(2), (3)(5) The settings of all gradations are moved toward + The settings of all gradations are moved toward -
2-126 COPIER Contents ADJUSTING THE BRIGHTNESS OF A COPY (Brightness) The brightness of color images can be adjusted. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Color Adjustments] key. (4) Touch the [Brightness] key. ☞[Color Adjustments] KEY (page 2-119) 3 Adjust the brightness. (1) Adjust the brightness. Touch the [+] key to make the image brighter, or the [-] key to make the image darker. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel a brightness setting... Touch the [Cancel] key in the screen of step 3. Darker Original Brighter OK OKCancel Color Adjustments Brightness 0-22 (1)(2)
2-127 COPIER Contents ADJUSTING THE INTENSITY OF A COPY (Intensity) This is used to adjust the intensity (saturation) of color images. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Color Adjustments] key. (4) Touch the [Intensity] key. ☞[Color Adjustments] KEY (page 2-119) 3 Adjust the intensity. (1) Adjust the intensity setting. Touch the [+] key to strengthen the intensity, or the [-] key to weaken the intensity. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). This function cannot be used in combination with Color Tone Enhancement in the copy exposure settings. To cancel an intensity setting... Touch the [Cancel] key in the screen of step 3. Weakening the intensityOriginal Strengthening the intensity OK OKCancel Color Adjustments Intensity 0-22 (1)(2)
2-128 COPIER Contents CHECKING COPIES BEFORE PRINTING (Proof Copy) This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to settings were required. However, this feature makes it possible to change settings for the scanned original without scanning it again, allowing you perform copying more efficiently. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select copy settings in the base screen. 3 Select Proof Copy. (1) Touch the [Special Modes] key. ☞SPECIAL MODES (page 2-43) (2) Touch the keys to switch through the screens. (3) Touch the [Proof Copy] key so that it is highlighted. (4) Touch the [OK] key. AAAA AAAA AAAAAAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA If OK After adjustments are made, 1 set is printed for you to checkThe remaining 4 sets are printed Adjust the settings If OK 1 set of copies is printed for you to check Proof Copy is selected and 5 sets of copies are executedThe remaining 4 sets are printed Special Modes 22 OK Image Edit Quick FileProof Copy Color Adjustments Slow Scan ModeOriginal CountMixed Size Original Stamp File (4)(2)(3)
2-129 COPIER Contents 4 Set the number of copies (number of sets) with the numeric keys. If you will copy multiple originals using the document glass, switch to sort mode after this step. ☞Sort mode (page 2-35) Up to 999 copies (sets) can be set. If an incorrect number of copies is set... Press the [CLEAR] key ( ) and then enter the correct number. 5 Press the [COLOR START] key or the [BLACK & WHITE START] key. One set of copies is printed. If you are using the document glass to copy multiple originals, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. One set of copies will be printed. (For the second original and following originals, use the same [START] key as you did for the first original. To cancel copying... Press the [STOP] key ( ). 6 Check the printed set of copies. If the copies are acceptable, touch the [End] key. If you need to change the settings, touch the [Change] key. When the [End] key is touched, the remaining sets are printed. If you touched the [Change] key, go to the next step. To cancel copying... Press the [STOP] key ( ). Plain 7 8½11 Special Modes 2-Sided Copy EndChange Press [End] to continue. To make a proof copy again, press [Start].