NEC Dsx 34b Manual
Have a look at the manual NEC Dsx 34b Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 836
25xx-Text Messages (Selectable Display Messaging)
250x-Setup
2501-Text
806◆Station Options: 2101-2501 DSX Software Manual
25xx-Text Messages (Selectable Display Messaging)
250x-Setup 2501-Text
Description
Use this program to customize the Selectable Display Messages.
Options
2501-[01-16]: Selectable Display Messages
(Message Text)
Use this option to program the system’s 16 Selectable Display Messages. Each message can be up to 18
characters long, including any blank spaces you may want to add for...](http://img.usermanuals.tech/thumb/54/104560/w64_dsx-34b-manual-1524141782_d-835.png "Page 836
25xx-Text Messages (Selectable Display Messaging)
250x-Setup
2501-Text
806◆Station Options: 2101-2501 DSX Software Manual
25xx-Text Messages (Selectable Display Messaging)
250x-Setup 2501-Text
Description
Use this program to customize the Selectable Display Messages.
Options
2501-[01-16]: Selectable Display Messages
(Message Text)
Use this option to program the system’s 16 Selectable Display Messages. Each message can be up to 18
characters long, including any blank spaces you may want to add for...")
![Page 839
31xx-Configuration
310x-Setup
3101-Type
DSX Software Manual Line Options: 3101-3714◆809
Line
3101-3715
Lines: 3101-3715
31xx-Con figuration
310x-Setup
3101-Type
Description
Use this program to set the line circuit type, name, PBX option, and E1 \
signaling (for Latin America instal-
lations only).
If programming multiple lines, you may find 9022-Line Copy (page 923) a handy time-saving tool.
Options
3101-01: Line Type
(Type)
Use this option to set the line’s circuit type for compatibility with the...](http://img.usermanuals.tech/thumb/54/104560/w64_dsx-34b-manual-1524141782_d-838.png "Page 839
31xx-Configuration
310x-Setup
3101-Type
DSX Software Manual Line Options: 3101-3714◆809
Line
3101-3715
Lines: 3101-3715
31xx-Con figuration
310x-Setup
3101-Type
Description
Use this program to set the line circuit type, name, PBX option, and E1 \
signaling (for Latin America instal-
lations only).
If programming multiple lines, you may find 9022-Line Copy (page 923) a handy time-saving tool.
Options
3101-01: Line Type
(Type)
Use this option to set the line’s circuit type for compatibility with the...")
![Page 841
31xx-Configuration
310x-Setup
3101-Type
DSX Software ManualLine Options: 3101-3714◆811
Line
3101-3715
3101-03: DTMF Dialing
(DTMF Dialing)
Use this option to set the type of dialing used by the line (DTMF or Di\
al Pulse).
F
eatures
•Central Of fice Calls, Answering (page 74)
• Central Of fice Calls, Placing (page 78)
• Direct Inward Dialing (page 99)
• Direct Inward Line (page 109)
• Pulse to Tone Conversion (page 285)
• T1 Lines (page 338)
• Tie Lines (page 344)
Intr
aMail Features
• None
Options...](http://img.usermanuals.tech/thumb/54/104560/w64_dsx-34b-manual-1524141782_d-840.png "Page 841
31xx-Configuration
310x-Setup
3101-Type
DSX Software ManualLine Options: 3101-3714◆811
Line
3101-3715
3101-03: DTMF Dialing
(DTMF Dialing)
Use this option to set the type of dialing used by the line (DTMF or Di\
al Pulse).
F
eatures
•Central Of fice Calls, Answering (page 74)
• Central Of fice Calls, Placing (page 78)
• Direct Inward Dialing (page 99)
• Direct Inward Line (page 109)
• Pulse to Tone Conversion (page 285)
• T1 Lines (page 338)
• Tie Lines (page 344)
Intr
aMail Features
• None
Options...")
31xx-Configuration 310x-Setup 3101-Type DSX Software ManualLine Options: 3101-3714◆811 Line 3101-3715 3101-03: DTMF Dialing (DTMF Dialing) Use this option to set the type of dialing used by the line (DTMF or Di\ al Pulse). F eatures •Central Of fice Calls, Answering (page 74) • Central Of fice Calls, Placing (page 78) • Direct Inward Dialing (page 99) • Direct Inward Line (page 109) • Pulse to Tone Conversion (page 285) • T1 Lines (page 338) • Tie Lines (page 344) Intr aMail Features • None Options •No (0) - Dial Pulse • Ye s (1) - DTMF Default •Ye s (1) - DTMF 3101-04: PBX Line (PBX Line) Use this option to designate a line as a PBX line. Enable this option if\ the line connects to a PBX instead of the telco. F eatures •PBX / Centrex Compatibility (page 270) Intr aMail Features • None Options •No (0) - Disabled • Ye s (1) - Enabled Default •No (0) - Disabled 3101-05: E1 Signaling Type (E1 Signaling) For E1 lines only, use this option to specify the E1 Signal Type 0-9. Set this option for compatibility with the connected telco. F eatures • N/A Intr aMail Features • None Options •0 for Q.421 • 1 for Q.421 Pls Clear • 2 for Q.421 Pls Answer • 3 for Brazil #1 • 4 for Brazil #2 • 5 for Brazil #3 • 6 for Brazil #4
31xx-Configuration 310x-Setup 3101-Type 812◆Line Options: 3101-3714 DSX Software Manual •7 for Brazil #5 • 8 for Brazil #6 Default •0 3101-06: MFC Signaling Type (MFC Signaling) For E1 lines only, use this option to specify the MFC Dialing Type. F eatures • N/A Intr aMail Features • None Options •0 for MFC not used • 1 for ITU • 2 for Argentina • 3 for Brazil • 4 for Chile • 5 for Columbia • 6 for Mexico • 7 for Venezuela Default •0
31xx-Configuration 310x-Setup 3102-Access DSX Software ManualLine Options: 3101-3714◆813 Line 3101-3715 3102-Access Description Use this program to set the line Class of Service and Toll Level. If programming multiple lines, you may find 9022-Line Copy (page 923) a handy time-saving tool. Options 3102-01: Line Class of Service (COS Level) Use this option to assign the line’s Class of Service. F eatures • See the Features for each option in 14xx-COS (Class of Service) (page 628). • Tie Lines (page 344) Intr aMail Features • None Options • 1-15 Default •1 3102-02: Line Toll Level (COS Level) Use this option to set the toll level for the line. If this toll level is higher than the extension’s toll level, it may cause additional dialing restrictions. If it is lower, it will have no effect. F eatures •Toll Restriction (page 351) • Tie Lines (page 344) Intr aMail Features • None Options •0-7 for toll levels 0-7 Default •0
31xx-Configuration 310x-Setup 3103-Settings 814◆Line Options: 3101-3714 DSX Software Manual 3103-Settings Description Use this program to customize basic settings for the line. If programming multiple lines, you may find 9022-Line Copy (page 923) a handy time-saving tool. Options 3103-01: Transmit Gain (Transmit Gain) Use this option to set the line’s transmit gain. This gain setting allows you to compensate for the transmit gain characteristics of the connected telco or PBX. The setting is applied to each line seizure. F eatures •Central Of fice Calls, Answering (page 74) • Central Of fice Calls, Placing (page 78) Intr aMail Features • None Options •0-30 (0 dB to 30 dB gain in .5 dB steps) • 31-60 (.5 dB loss to 15 dB loss in .5 dB steps) Default •0 3103-02: Receive Gain (Receive Gain) Use this option to set the line’s receive gain. This gain setting allows you to compensate for the receive gain characteristics of the connected telco or PBX. The setting is applied to each line siezure. F eatures •Central Of fice Calls, Answering (page 74) • Central Of fice Calls, Placing (page 78) Intr aMail Features • None Options •0-30 (0 dB to 30 dB gain in .5 dB steps) • 31-60 (.5 dB loss to 15 dB loss in .5 dB steps) Default •0
31xx-Configuration 310x-Setup 3103-Settings DSX Software ManualLine Options: 3101-3714◆815 Line 3101-3715 3103-03: Loop Length (Loop Length) Use this option to compensate for a line’s loop length. Use the default option for normal installations. Use the short option only when the system is very close to the central of fice or behind a PBX. Use the long option when the loop length is abnormally long. Set this option for optimal speakerphone performance. F eatures •Central Of fice Calls, Answering (page 74) • Central Of fice Calls, Placing (page 78) Intr aMail Features • None Options •0 for default (normal) • 1 for short loop • 2 for long loop Default •0
31xx-Configuration 310x-Setup 3103-Settings 816◆Line Options: 3101-3714 DSX Software Manual 3103-04: Tandem Calls (Tandem Calls) Use this option to enable or disable Tandem Calls for the line. Enable Tandem Calls for lines if Off Premises Call Forwarding should be able to route incoming calls to an off-premises location. The originating line (i.e., the line that Off Premises Call Forwarding will reroute) must have this option enabled. If enabled, the system can forward an incoming over a second line to an off- premise number. If disabled, line-to-line forwarding cannot occur. This option is not required when the sys- tem is forwarding Intercom calls off-premises. When this option is disabled (N), the system will immediately route a line ringing an OPX Call Forwarded extension to Key Ring. It will not attempt to reroute the call. Features • Call Forwarding Off Premises (page 51) • Tandem Calls / Unsupervised Conference (page 341) Intr aMail Features • Centrex Transfer (page 460) • External Transfer (page 483) • Make Call (page 525) Options •No (0) - Disabled • Ye s (1) - Enabled Default •No (0) - Disabled 3103-05: Music On Hold Source (MOH Source) Use this option to assign the Music on Hold music source. F eatures •Music on Hold (page 246) Intr aMail Features • Message On Hold (page 541) Options •0 for none. • 1 for audio input minijack 1. • 2 for audio input minijack 2. • 3 for internal tone 1. • 4 for internal tone 2. • 5 for IntraMail Message On Hold. See Message On Hold (page 541) for more. Default •
31xx-Configuration 311x-Options 3111-Features DSX Software ManualLine Options: 3101-3714◆817 Line 3101-3715 311x-Options 3111-Features Description Use this program to enable or disable various line features. If programming multiple lines, you may find 9022-Line Copy (page 923) a handy time-saving tool. Options 3111-01: Disable Forced Account Codes (Disable Forced AC) Use this option to enable or disable Forced Account Codes for an individual line. If enabled, the system will not enforce Forced Account Codes for the line. If disabled, the system will enforce Forced Account Codes for the line. F eatures •Account Codes (page 14) Intr aMail Features • None Options •No (0) - Disabled • Ye s (1) - Enabled Default •No (0) - Disabled 3111-02: Override Extension’s Toll Level (Override Ext Toll) Use this option to “release” the Toll Restriction on a line. If enabled, any user can dial any number on the line without restriction. F eatures •Toll Restriction (page 351) Intr aMail Features • None Options •No (0) - Disabled • Ye s (1) - Enabled Default •No (0) - Disabled 3111-03: Dial Tone Detection (Dialtone Detect) Use this option to enable or disable Dial Tone Detection for the line. F eatures •Dial Tone Detection (page 98) Intr aMail Features • None Options •No (0) - Disabled
31xx-Configuration 311x-Options 3111-Features 818◆Line Options: 3101-3714 DSX Software Manual •Ye s (1) - Enabled Default •Ye s (1) - Enabled 3111-04: Enable MFC Group B (MFC Group B) For E1 lines only, use this option to enable or disable the MFC Dialing Group B superviso\ ry signaling. Since not all central of fices provide Group B signaling, set this option for compatibility with the conne\ cted telco. Features • N/A Intr aMail Features • None Options •No (0) - Disabled • Ye s (1) - Enabled Default •Ye s (1) - Enabled 3111-05: Store and Forward (Store and Forward) Use this option to enable or disable Store and Forward for every line in the line group the user will access when they dial a line access code or press a loop key. If enabled, the system buffers the user-dialed digits and dials them on the line when the user has completed dialing. If disabled,\ manually dialed digits output on the line as the user dials them. You should enable store and forward for every line in accessed line group. F eatures • Central Of fice Calls, Placing (page 78) Intr aMail Features • None Options •No (0) - Disabled • Ye s (1) - Enabled Default •No (0) - Disabled 3111-06: Station Message Detail Recording (SMDR) Use this option to enable or disable SMDR reporting for the line. If ena\ bled, the SMDR report includes data for the line. If disabled, the SMDR report does not include data for the\ line. F eatures •Station Message Detail Recording (page 328) Intr aMail Features • None Options •No (0) - Disabled • Ye s (1) - Enabled Default •Ye s (1) - Enabled
31xx-Configuration 311x-Options 3112-Termination DSX Software ManualLine Options: 3101-3714◆819 Line 3101-3715 3112-Termination Description Use this program to set the line termination options. If programming multiple lines, you may find 9022-Line Copy (page 923) a handy time-saving tool. Options 3112-01: Direct Termination in the Day (Day Termination) Use this option to set the day termination (answering point) for the l\ ine. If the line is a Direct Inward Line, it rings the answering point directly during the day. F eatures •Direct Inward Line (page 109) • Group Ring (page 189) • Key Ring (page 214) • Voice Mail (page 372) Intr aMail Features • Answer Tables (page 420) • Automated Attendant (page 433) • Voice Mail Over flow (page 590) Options •Extension number (0-999) • UCD Group master number (700-707) • Voice mail master number (700)•Ring Group master number (600-607) • Key Ring (entered by pressing CLEAR). Default • Key Ring 3112-02: Enable Day Over flow (Day Over flow) Use this option to enable or disable day mode over flow for the line. If disabled, an unanswered DID call during the day diverts to Key Ring without over flow (unless intercepted by another feature). F eatures •Direct Inward Dialing (page 99) • Direct Inward Line (page 109) • Group Ring (page 189) • Key Ring (page 214) • Voice Mail (page 372) Intr aMail Features • Voice Mail Over flow (page 590) Options •No (0) - Disabled • Ye s (1) - Enabled Default •No (0) - Disabled
31xx-Configuration 311x-Options 3112-Termination 820◆Line Options: 3101-3714 DSX Software Manual 3112-03: Day Overflow Destination (Day Ov fl Destination) Use this option to set the over flow destination for day mode calls (including DILs). The destination can be an extension, UCD Group master number, voice mail master number, Ring Group master number, or Key Ring (by pressing CLEAR). F eatures •Direct Inward Dialing (page 99) • Direct Inward Line (page 109) • Group Ring (page 189) • Key Ring (page 214) • Voice Mail (page 372) Intr aMail Features • Voice Mail Over flow (page 590) Options •Extension (0-999) • Key Ring (entered by pressing CLEAR). Default • 300 3112-04: Direct Termination at Night (Night Termination) Use this option to set the night termination (answering point) for the\ line. If the line is a Direct Inward Line, it rings the answering point directly at night. F eatures •Direct Inward Line (page 109) • Group Ring (page 189) • Key Ring (page 214) • Voice Mail (page 372) Intr aMail Features • Automated Attendant (page 433) • Instruction Menu (page 507) • Voice Mail Over flow (page 590) Options •Extension number (0-999) • UCD Group master number (700-707) • Voice mail master number (700)•Ring Group master number (600-607) • Key Ring (entered by pressing CLEAR). Default • Key Ring 3112-05: Enable Night Over flow (Night Over flow) Use this option to enable or disable night mode over flow for the line. If disabled, an unanswered DID call during the day diverts to Key Ring without over flow (unless intercepted by another feature). F eatures •Direct Inward Dialing (page 99) • Direct Inward Line (page 109) • Group Ring (page 189) • Key Ring (page 214)