Home > NEC > Software > NEC Dsx 34b Manual

NEC Dsx 34b Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Dsx 34b Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 984
    Add page 701 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1602-Outgoing Call Timers
DSX Software ManualSystem Options: 1001-1702◆671
System
1001-1702
1602-Outgoing Call Timers
Description
Use this program to adjust timers that affect outgoing calls.
Options
1602-01: Interdigit Timer
(Interdigit Time)
Use this option to set the Intercom interdigit time. When an extension user places a call, they must dial each 
succeeding digit within this interval.
F
eatures
•Central Of fice Calls, Placing  (page 78)
• Directory Dialing  (page 131)
• Intercom  (page 211)
Intr
aMail Features
• None
Options
•1-9999 seconds
Default
•6 seconds
1602-02: Line Response Timer
(Line Response)
When the system sends a line seize message to the ATRU/COIU PCB, it waits this interval for a response 
from the line PCB. If the system gets no response within this interval, it marks the line as defective. Be sure 
the value you enter is compatible with the local telco. If you set this value too short, the system may mark 
properly functioning lines as defective. If too long, defective lines may be left in service. F
eatures
• N/A
Intr
aMail Features
• None
Options
•4-1020 in 100 mS intervals (e.g., 10 = 1 second, 100 = 10 seconds).
Default
•100 (10 seconds)
1602-03: Dialtone Detect Timer
(Dialtone Detect)
When the system seizes a line to place a Speed Dial call, it waits this interval for dial tone before outdialing 
the call. The system requires that the  first dial tone be at least 5 seconds long and the second dial tone to be \
at least 2.5 seconds long. Be sure the value you enter is compatible with the local telco. If you set this value 
too short, the system may not seize properly functioning lines. If too l\
ong, there will be too long a delay 
before the system skips over a defective line.
F
eatures
•Speed Dial  (page 315)
Intr
aMail Features
• None
    Add page 702 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1602-Outgoing Call Timers
672◆System Options: 1001-1702 DSX Software Manual
Options
•1-9999 in 100 mS increments (e.g., 10 = 1 second, 100 = 10 seconds).
Default
•20 (2 seconds)
    Add page 703 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1602-Outgoing Call Timers
DSX Software ManualSystem Options: 1001-1702◆673
System
1001-1702
1602-04: Dial Pause Timer
(Interdigit Time)
Use this option to set the length of a pause stored in a Speed Dial bin.\
F
eatures
•Speed Dial  (page 315)
Intr
aMail Features
• Centrex Transfer  (page 460)
Options
•1-9999 seconds
•
0 for disabled
Default
•1 second
1602-05: CO Busy Out Timer
(CO Busy Out)
Use this option to set the guard time for lines. When the system disconnects a line (e.g., after a user hang 
up), the system keeps the line idle until this timer expires. The CO Busy Out timer helps prevent call colli-
sions. If you set this interval too short, call collisions may occur. If too long, there will be unnecessary delays 
before you can use the line for a new call. F
eatures
• None
Intr
aMail Features
• None
Options
•10-9999 mS
Default
•10 mS
1602-06: Repeat Redial Timer
(Repeat Dial)
Use this option to set the interval between Auto Redial callout attempts. F
eatures
•Auto Redial  (page 28)
Intr
aMail Features
• None
Options
•1-99 seconds
Default
•30
1602-07: Repeat Redial Busy Timer
(Repeat Busy)
Use this option to set how long the system waits for busy tone when processing an Auto Redial callout 
attempt. The interval is measured from the last digit dialed to the receipt of busy tone. If the system doesn’t 
receive busy tone within this interval, it assumes that the call went through and cancels Auto Redial. F
eatures
•Auto Redial  (page 28)
    Add page 704 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1602-Outgoing Call Timers
674◆System Options: 1001-1702 DSX Software Manual
IntraMail Features
• None
Options
•1-99 seconds
Default
•6
    Add page 705 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1603-Recall Timers
DSX Software ManualSystem Options: 1001-1702◆675
System
1001-1702
1603-Recall Timers
Description
Use this program to adjust timers that affect system recalls.
Options
1603-01: Transfer  Recall Timer
(Transfer Recall)
Use this timer to set how long a transferred call rings an idle destination extension or Ring Group before recall-
ing the extension from which it was initially transferred. In addition, use this timer to set how long a transferred 
call rings a busy operator extension before recalling the extension from which it was initially transferred.
Features
• Direct Inward Line  (page 109)
• Extension Hunting  (page 154)
• Group Ring  (page 189)
• Key Ring  (page 214)
• Transfer  (page 358)
Intr
aMail Features
• Extension Hunting to Voice Mail  (page 478)
• Unscreened Transfer  (page 587)
Options
•1-9999 seconds
•
0 for disabled
Default
•1 second
1603-02: Hold Recall Timer
(Hold recall)
Use this option to set how long a call stays on Hold before it recalls the extension that initial\
ly placed it on Hold.
Features
• Hold  (page 202)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•60 seconds
1603-03: Exclusive Hold Recall Timer
(X-Hold Recall)
Use this option to set how long a call stays on Exclusive Hold before it recalls the extension that initially 
placed it on Exclusive Hold. F
eatures
•Hold  (page 202)
Intr
aMail Features
• None
    Add page 706 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1603-Recall Timers
676◆System Options: 1001-1702 DSX Software Manual
Options
•1-9999 seconds
•
0 for disabled
Default
•90 seconds
    Add page 707 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1603-Recall Timers
DSX Software ManualSystem Options: 1001-1702◆677
System
1001-1702
1603-04: Park Orbit Recall Timer
(Orbit Recall)
Use this option to set how long a call stays in System Park Orbit before it recalls the extension that parked it. 
This timer if for orbits 60-67 only. The recall for orbits 68 and 69 is  fixed at 5 minutes.
F
eatures
• Park  (page 266)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•20 seconds
    Add page 708 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1604-Station Timers
678◆System Options: 1001-1702 DSX Software Manual
1604-Station Timers
Description
Use this program to adjust timers that affect stations.
Options
1604-01: Delay Ring Timer
(Delay Ring)
Use this option to set how long the system waits before ringing an extension that has the Delayed Ringing 
option enabled. This timer also sets the delay interval for delay ring lines ringing the External Paging system.
Features
•Central Of fice Calls, Answering  (page 74)
• Delayed Ringing  (page 95)
• Forced Line Disconnect  (page 182)
• Key Ring  (page 214)
• Paging  (page 259)
• Line Keys  (page 227)
• Loop Keys  (page 233)
• Night Service / Night Ring  (page 252)
• Paging  (page 259)
• Private Line  (page 280)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•10 seconds
1604-02: Call Coverage Delay Ring Timer
(CCK Delay)
For extensions with Delayed Ringing Call Coverage keys, use this option to set how long a call  flashes the 
key at an extension before it starts to ring.
F
eatures
•Call Coverage Keys  (page 40)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•10 seconds
1604-03: Extended Ringing Timer
(Extended Ring)
If an extension’s Class of Service enables Extended Ringing, use the timer to set the du\
ration of the 
Extended Ringing.
    Add page 709 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1604-Station Timers
DSX Software ManualSystem Options: 1001-1702◆679
System
1001-1702
Features
• Extended Ringing  (page 153)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•20 seconds
    Add page 710 to Favourites
    image text
    Enable zoom 
    							
16xx-Timers
160x-Feature Timers
1605-Control Timers
680◆System Options: 1001-1702 DSX Software Manual
1605-Control Timers
Description
Use this program to adjust timers that affect various system features.
Options
1605-01: Page Duration Timer
(Page Duration)
Use this option to set the maximum length of Page announcements.
F
eatures
•Paging  (page 259)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•30 seconds
1605-02: Meet Me Conference Join Timer
(Meetme Conf)
When a user initiates a Meet-Me Conference, use this option to set how long the system waits for the paged 
party to join the call. F
eatures
•Meet-Me Conference  (page 236)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•30 seconds
1605-03: Door Relay Unlock Timer
(Door Relay)
This timer sets the interval that the system or PGDAD Module relay remains closed after a keyset user acti-
vates (closes) the relay. After this interval, the relay automatically returns to its open (idle) state. F
eatures
•Door Box  (page 147)
Intr
aMail Features
• None
Options
•1-9999 seconds
•
0 for disabled
Default
•30 seconds
    All NEC manuals Comments (0)