Home
>
Land Rover
>
Automobile
>
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Have a look at the manual Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GENERAL DATA 04-16 Wheels and tyres WARNING: The following precautions must be observed when using the space saver spare wheel: lThe space saver spare wheel is for temporary use only, it must be replaced with the repaired standard wheel as soon as possible. lOnly one space saver is to be used on the vehicle at any one time with a maximum speed of 50 mph (80 km/h) being observed. lThe inflation pressure of the space saver tyre must be maintained at 4.2 bar (60 lbf.in2). lThe use of snow chains is not permitted on the space saver spare wheel. lTake care when driving, the space saver tyre is smaller in size and is inflated to a higher pressure than the standard tyres; it will provide a harsher ride and may have less traction on some surfaces. NOTE: The tyre size is displayed on the outer wall of each tyre. Normal operating conditions: Carrying up to 4 passengers and luggage. Wheel size: ⇒ Alloy 71/2J x 18 8J x 19 8 1/2J x 20 51/2J x 19 Space saver - Certain models only Tyre size ⇒ With 7 1/2J x 18 wheels 235/65 R18 110H 255/60 R18 112H ⇒ With 8J x 19 wheels 255/55 R19 111Q - Multi-terrain ⇒ With 8 1/2J x 20 wheels 255/55 R20 111H 255/55 R20 111V ⇒ With 5 1/2J x 19 Space saver T175/80 R19 122M Space saver Tyre Pressures All tyres except space saver - normal operating conditionsFront Rear2.3 Bar (33 lbf.in 2) 2.5 Bar (36 lbf.in2) All tyres except space saver- vehicle at GVW Front Rear2.5 Bar (36 lbf.in 2) 3.0 Bar (44 lbf.in2) Space saver Front and rear 4.2 bar (60 lbf.in 2)
GENERAL DATA 04-17 Air conditioning Type CFC free, sealed closed loop Compressor: ⇒ Displacement 177.7 cm 3/rev (10.84 in3/rev) ⇒ Relief valve operating pressure 34.3 to 41.4 bar (497 to 600 lbf.in 2) ⇒ Refrigerant oil quantity 110 cc (3.8 fl.ozs) ⇒ Refrigerant oil Nippon Denso ND-8 ⇒ Refrigerant HFC - R134A ⇒ Refrigerant charge quantity 510 ± 10 grammes (17.8 ± 0.8 ozs) Oil quantities lost when changing individual components: ⇒ Condenser/receiver drier ⇒ Evaporator ⇒ Pipe/hose30 ml 20 ml 10 ml
GENERAL DATA 04-18 Electrical - Td6 Electrical - V8 System 12 volt, negative earth Battery: ⇒ Type 12 volt ⇒ Capacity 110 amp hour Alternator: ⇒ Type Valeo A14V, air cooled ⇒ Maximum output 150 amp Starter motor: ⇒ Type Nippon Denso, E95 RL ⇒ Power 2.2 kW System 12 volt, negative earth Battery: ⇒ Type 12 volt ⇒ Capacity 110 amp hour Alternator: ⇒ Type Bosch KF, water cooled ⇒ Maximum output 150 amp Starter motor ⇒ Type Nippon Denso, 112V RA ⇒ Power 1.8 kW
GENERAL DATA 04-19 Dimensions * Measurement taken with vehicle at unladen weight. Weights CAUTION: Axle weights are non additive. The individual maximum weights and gross vehicle weight must not be exceeded. Overall length 4950 mm (193.1 in) Overall width (including mirrors) 2191 mm (85.4 in) Overall width (mirrors folded) 2009 mm (78.4 in) Overall height *: ⇒ Access ⇒ Motorway ⇒ Standard ⇒ Off road1820 mm (71.1 in) 1840 mm (71.7 in) 1863 mm (73.1 in) 1913 mm (74.6 in) Minimum ground clearance - Off road * 281 mm (10.9 in) Wheelbase 2880 mm (112.3 in) Maximum wading depth 500 mm (19.5 in) Condition kgs lbs Unladen weight *: ⇒ Td6 Model 2435 to 2570 5366 to 5664 ⇒ V8 Model Note: * Depending on options fitted. 2440 to 2570 5377 to 5664 Max.GVW: ⇒ Td6/V8 Models 3050 6722 ⇒ Front/rear split - Td6/V8 Models 1200 1850 Max. front axle load - Td6/V8 Models Max. rear axle load - Td6/V8 Models1530 18503372 4077 Max. braked trailer - Td6/V8 Models 3500 7714 Down hitch load - Td6/V8 Models 250 551
IDENTIFICATION NUMBERS 05-1 IDE NTIFICATION NUMBERS Vehicle Identification Number Location The Vehicle Identification Number (VIN) plate is on a label; attached to the inner wing, in front of the LH suspension turret. The VIN is also stamped in the following locations: lOn a plate behind the LH lower corner of the windscreen. lOn the front of the RH suspension turret. RH Suspension turret VIN Windscreen VINInner wing VIN On NAS, Canadian and Gulf models, the inner wing VIN plate is replaced by a paint colour label. The VIN plate can be found on the forward face of the LH B/ C post. M01 0245
IDENTIFICATION NUMBERS 05-2 VIN plate content The VIN plate contains the following information: aModel name bEngine description cCountry text dDiesel indicator eColour code/group fReserved gHeadlight code hLand Rover iEU type approval jVehicle Identification Number (VIN) kTotal weight lTowing weight mFront axle weight nRear axle weight oExterior paint stickerVehicle identification number - except NAS and Canada Example: SALLMAMA41A001099 Vehicle identification number - NAS and Canada Example: SALMA11401A001099 M01 0247 b c e f g h i j k l m n o d a SALManufacturers identifier (Land Rover UK) LMMarque/Model M = Range Rover AClass A = 2880 mm (113 in) MBody Style - 4 door variant A, B or CEngine A = 4.4 V8 Petrol Catalyst B = 4.4 V8 Petrol Non Catalyst C = 3.0 Td6 Diesel 3 or 4Transmission 3 = RHD automatic gearbox 4 = LHD automatic gearbox 1, 2 or 3Model Year 1 = 2001 Model year 2 = 2002 Model year AAssembly plant A = Solihull 6 figures = Serial number SALManufacturers identifier (Land Rover UK) MMarque/Model M = Range Rover AClass 1Body Style 1 = 4 door Station Wagon 1Engine 1 = 4.4 V8 Petrol 2 = 3.0 Td6 Diesel 4Transmission 4 = LHD automatic gearbox OCheck digit 1, 2 or 3Model Year 1 = 2001 Model year 2 = 2002 Model year 3 = 2003 Model year AAssembly plant A = Solihull 6 figures = Serial number
IDENTIFICATION NUMBERS 05-3 Identification Number Locations Engine number Td6 Engine The Td6 engine serial number is stamped on the LH side of the cylinder block V8 Engine The V8 engine serial number is stamped on the top of the cylinder block at the front of the engine, beneath the throttle housing.Td6 automatic gearbox number The GM automatic gearbox serial number is on a plate attached to the LH side of the gearbox. V8 automatic gearbox number The ZF automatic gearbox serial number is on a plate attached to the LH side of the gearbox.
IDENTIFICATION NUMBERS 05-4 Transfer box number The New Venture Gears transfer box serial number is etched on a boss located at the rear of the unit above the oil drain plug.Paint code - NAS, Canadian and Gulf markets only The vehicle paint colour is shown on the LH inner wing. NOTE: Only the paint colour is shown, and not the paint code. M01 0318
TORQUE WRENCH SETTINGS 06-1 TORQUE WRE NCH SETTINGS Maintenance TORQUE DESCRIPTION METRIC IMPERIAL Spark plugs31 Nm 23 lbf.ft Td6 oil sump drain plug 23 Nm 17 lbf.ft Td6 oil filter cap 25 Nm 18 lbf.ft V8 oil sump drain plug 17 Nm 13 lbf.ft V8 oil filter cap 25 Nm 18 lbf.ft Td6 (GM) Automatic gearbox oil filler/level plug 20 Nm 15 lbf.ft V8 (ZF) Automatic gearbox oil filler/level plug 35 Nm 26 lbf.ft Road wheel nuts 140 Nm 103 lbf.ft