Home
>
Land Rover
>
Automobile
>
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Have a look at the manual Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SEATS 76-5-22 REPAIRS Motor - squab $% 78.70.21 Remove 1.Remove seat assembly. + SEATS, REPAIRS, Front seat. 2.Remove Allen bolt securing arm rest. 3.Remove armrest from boss. 4.Remove headrest. 5.Release 3 backboard tension straps from under seat.6.Release staples securing squab cover to lower backboard. 7.Release squab side cover from both sides of backboard. 8.Release 2 studs securing lower half of backboard. 9.Release backboard from seat. 10.Disconnect multiplugs from headrest and upper squab motors. M78 0613 M78 0624
SEATS REPAIRS 76-5-23 11.Disconnect multiplugs from lumbar pump and valve. 12.Disconnect multiplug to heated seat circuit. 13.Release harness from 4 retaining clips.14.Remove 2 Torx bolts and remove squab frame from seat frame. 15.Remove 2 E clips securing motor assembly. 16.Carefully prise motor assembly from mounting bosses and release drive cable from assembly. M78 0616
SEATS 76-5-24 REPAIRS Refit 1.Position and fit drive cable to motor assembly. 2.Carefully fit motor assembly to mounting bosses. 3.Fit E clips securing motor assembly. 4.Position squab frame to seat frame, fit Torx bolts tighten to 25 Nm (18 lbf.ft). 5.Position harness and secure retaining clips. 6.Connect multiplugs to headrest and squab motor. 7.Connect multiplug to heated seat circuit. 8.Connect lumbar harness multiplugs to lumbar pump and valve. 9.Position backboard to seat assembly, fit studs securing lower of backboard. 10.Position and fit both sides of squab cover to backboard. 11.Position lower squab cover to backboard and staple. 12.Fit backboard tension straps to under seat retaining clips. 13.Fit armrest to boss and secure with Allen bolt, tighten to 25 Nm (18 lbf.ft). 14.Fit seat assembly. + SEATS, REPAIRS, Front seat. Motor - fore & aft - front seat $% 78.70.25 Remove 1.Remove seat assembly. + SEATS, REPAIRS, Front seat. 2.Disconnect multiplug from fore and aft motor. 3.Remove 2 Torx bolts from fore and aft motor and remove motor. Refit 1.Position fore and aft motor and secure with Torx bolts, tighten to 10 Nm (7 lbf.ft). 2.Connect multiplug to fore and aft motor. 3.Fit seat assembly. + SEATS, REPAIRS, Front seat.
SEATS REPAIRS 76-5-25 Motor - rise & fall - front seat $% 78.70.27 Remove 1.Remove seat assembly. + SEATS, REPAIRS, Front seat. 2.Disconnect multiplug from rise and fall motor. 3.Remove 2 Torx bolts securing rise and fall motor and remove motor. Refit 1.Position rise and fall motor and secure with Torx bolts, tighten to 10 Nm (7 lbf.ft). 2.Connect multiplug to rise and fall motor. 3.Fit seat assembly. + SEATS, REPAIRS, Front seat. Motor - rise & fall - head rest - front seat $% 78.70.31 Remove 1.Remove seat assembly. + SEATS, REPAIRS, Front seat. 2.Remove Allen bolt securing arm rest. 3.Remove armrest from boss. 4.Release 3 backboard tension straps from under seat. 5.Release staples securing squab cover to lower backboard. M78 0613
SEATS 76-5-26 REPAIRS 6.Release 2 studs securing lower half of backboard. 7.Release squab side cover from both sides of backboard. 8.Release backboard from seat. 9.Release headrest from motor assembly and remove from seat. 10.Disconnect multiplug from headrest rise and fall motor. 11.Release motor assembly from retaining clips and remove from frame. Refit 1.Position motor assembly to frame and secure in retaining clips. 2.Connect multiplug to headrest rise and fall motor. 3.Fit head rest in seat and secure to motor assembly. 4.Position backboard to seat assembly, fit studs securing lower of backboard. 5.Position and fit both sides of squab cover to backboard. 6.Position lower squab cover to backboard and staple.7.Fit backboard tension straps to under seat retaining clips. 8.Fit armrest to boss and secure with Allen bolt, tighten to 25 Nm (18 lbf.ft). 9.Fit seat assembly. + SEATS, REPAIRS, Front seat.
SEATS REPAIRS 76-5-27 Switch - front seat control $% 78.70.89 Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed. + GENERAL INFORMATION, Electrical Precautions. Remove 1.Raise seat cushion. 2.Make the SRS system safe. + GENERAL INFORMATION, Supplementary Restraint System (SRS) Precautions. WARNING: Always disconnect both battery leads before beginning work on the SRS system. Disconnect the negative lead first. Never reverse connect the battery. 3.Remove screw securing valance. 4.Release 4 fixings securing outer valance and carefully disengage valance from seat.5.Release fixings, disconnect multiplugs, and remove switch pack. Refit 1.Ensure lumbar switch harness is correctly located. 2.Position switch pack, connect multiplugs and fit switch pack to valance. 3.Align fixings, carefully fit valance and secure with screw. 4.Connect battery leads, earth lead last. 5.Reposition seat.
SEATS 76-5-28 REPAIRS Switch pack - seat memory $% 78.70.91 Remove 1.Raise seat. 2.Remove screw securing rear of outer valance. 3.Carefully release 3 retaining clips securing outer valance. 4.Release switch pack from 3 retaining clips. 5.Disconnect 4 multiplugs and remove switch pack. Refit 1.Connect 4 multiplugs to switch pack. 2.Fit switch pack to outer valance and secure 3 retaining clips. 3.Position outer valance to seat base and secure 3 retaining clips. 4.Fit screw to secure rear of seat valance. 5.Lower seat to original position. Lever assembly - rear squab release $% 78.80.03 Remove 1.Remove squab cover and pad from frame. + SEATS, REPAIRS, Cover - squab - rear seat - side - LH. 2.Remove and discard retaining clip securing operating lever to latch assembly. 3.Release operating lever to latch assembly. 4.Release 3 retaining clips securing lever assembly to frame, remove assembly. Refit 1.Position lever assembly to frame, secure retaining clips. 2.Position and fit operating lever to latch assembly, secure with retaining clip. 3.Fit squab cover and pad to frame. + SEATS, REPAIRS, Cover - squab - rear seat - side - LH.
SEATS REPAIRS 76-5-29 Latch - rear squab $% 78.80.05 Remove 1.Remove squab cover and pad from frame. + SEATS, REPAIRS, Cover - squab - rear seat - RH. 2.Remove and discard retaining clip securing operating rod to latch assembly. 3.Release operating rod from assembly. 4.Remove 2 Allen bolts securing latch assembly to frame, remove assembly. Refit 1.Position latch assembly to frame and secure with Allen bolts, tighten to 25 Nm (18 lbf.ft). 2.Connect operating rod and secure with retaining clip. 3.Fit squab cover and pad to frame. + SEATS, REPAIRS, Cover - squab - rear seat - RH. Cover - squab - front seat - models with adjustable upper squab $% 78.90.07 Remove 1.Remove seat assembly. + SEATS, REPAIRS, Front seat. 2.Release 3 backboard tension straps from under seat. M78 0628
SEATS 76-5-30 REPAIRS 3.Remove 2 screws securing lower squab finisher. 4.Release lower finisher from 6 retaining clips and remove. 5.Disconnect 2 tension straps securing upper squab cover. 6.Release velcro strip securing squab cover.7.Release beading from squab cover finisher. 8.Release finisher from 4 retaining clips and remove. 9.Carefully release 2 retaining clips securing headrest to motor housing. 10.Remove headrest. 11.Release retaining strip securing squab cover to lower frame.
SEATS REPAIRS 76-5-31 12.Disconnect multiplugs from headrest and upper squab motors. 13.Disconnect harness multiplugs from lumbar pump and valve.14.Disconnect multiplug from heated seat circuit. 15.Release 2 retaining strips, securing both sides of lower squab cover to frame. 16.Release squab harness from 4 retaining clips. 17.Remove 2 Torx bolts securing squab frame to seat frame. 18.Remove squab assembly from seat assembly. 19.Release 4 retaining strips securing both sides of squab assembly to frame. 20.Remove squab cover and pad from frame. M78 0635 M78 0636 M78 0637