Home
>
Land Rover
>
Automobile
>
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Have a look at the manual Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
EXTERIOR FITTINGS 76-2-6 REPAIRS Refit 1.Fit harness, position motor and secure with screws. 2.Feed harness through cheater casting, fit Torx screws and tighten to 14 Nm (10 lbf.ft). 3.Fit and secure access cover. 4.Align harness and secure with star washer. 5.Fit locking body to multiplug. 6.Fit exterior mirror. + EXTERIOR FITTINGS, REPAIRS, Mirror - exterior. 7.Fit exterior mirror glass. + EXTERIOR FITTINGS, REPAIRS, Mirror - exterior. Mirror - exterior $% 76.11.10 Remove 1.Remove front door trim casing. + DOORS, REPAIRS, Trim casing - front door. 2.Release lower edge of door trim finisher from clip, move aside. Remove foam moulding and release harness. 3.Remove 3 Torx screws securing exterior mirror to door, withdraw harness and remove mirror assembly. 4.Remove foam pad from cheater panel.
EXTERIOR FITTINGS REPAIRS 76-2-7 Refit 1.Fit foam pad to cheater panel. 2.Feed mirror harness through panel, position mirror, fit and tighten Torx screws to 10 Nm (7 lbf.ft). 3.Fit and secure upper door trim finisher. 4.Fit front door trim casing. + DOORS, REPAIRS, Trim casing - front door. Tow bar $% 76.11.41 Remove 1.Remove bumper armature. + EXTERIOR FITTINGS, REPAIRS, Bumper armature - rear. 2.Remove tow ball locking pin. 3.Remove nut and bolt securing tow ball to tow bar. Remove the tow ball. 4.Remove 2 bolts securing socket to tow bar and position the socket aside.
EXTERIOR FITTINGS 76-2-8 REPAIRS 5.Remove 4 nuts securing exhaust rubber mountings to the rear subframe. 6.Support exhaust and remove 4 nuts securing exhaust rubber mountings to the tow bar. 7.Lower exhaust sufficiently to allow access to tow bar retaining bolts. 8.Remove 4 bolts securing tow bar to body and with assistance remove the tow bar. Refit 1.With assistance position tow bar to body, fit bolts and tighten to 165 Nm ( 122 lbf.ft). 2.Position socket to tow bar, fit bolts and tighten to 25 Nm (18 lbf.ft). 3.Position exhaust to mountings, fit nuts and tighten to 25 Nm ( 18 lbf,ft). 4.Fit tow ball to tow bar. Fit nut and bolt and tighten to 300 Nm (224 lbf.ft). 5.Fit tow ball locking pin. 6.Fit bumper armature. + EXTERIOR FITTINGS, REPAIRS, Bumper armature - rear. Undertray - front $% 76.11.81 Remove 1.Raise vehicle on lift. 2.Release clips and remove towing eye finisher. 3.Remove 6 screws securing air dam to undertray. 4.Remove 2 screws securing air dam support brackets to bumper. 5.Carefully ease air dam aside for access and remove 4 screws. M76 4276
EXTERIOR FITTINGS REPAIRS 76-2-9 6.Remove 2 screws securing LH inner edge of wheel arch liner to undertray, repeat on RH side. 7.Remove 6 remaining screws securing undertray, release panel and remove. NOTE: Do not carry out further dismantling if component is removed for access only. 8.Remove 6 screw retaining clips from undertray. Refit 1.Fit screw retaining clips to undertray. 2.Position undertray and secure with screws. 3.Fit screws securing air dam and wheelarch liners. 4.Fit and secure towing eye finisher. Bumper armature - rear $% 76.22.52 Remove 1.Open both tailgates, release and fold back parcel shelf. 2.Remove rear bumper. + EXTERIOR FITTINGS, REPAIRS, Bumper - rear. 3.Raise spare wheel cover and support on stand. 4.Release and remove both LH and RH access panels. 5.Remove Allen bolts securing LH and RH luggage securing rings, remove rings. 6.Remove 2 turn buckles securing rear quarter trim on LH and RH side of vehicle, remove trim. 7.Locate straps and remove both LH and RH loadspace bin covers. M76 4277 M76 4316
EXTERIOR FITTINGS 76-2-10 REPAIRS 8.Remove stud and turn buckle securing lower rear quarter trim on LH and RH side of vehicle. 9.Remove warning triangle. 10.Release clip and remove wheel chock and tool roll. 11.Remove RH bin from loadspace carrier. 12.Remove 3 plastic nuts and release 2 studs securing RH bin carrier, remove carrier. 13.Remove 3 plastic nuts securing LH carrier and remove carrier.14.Remove 8 nuts securing rear armature and remove. NOTE: Do not carry out further dismantling if component is removed for access only. 15.Release 8 clips from armature Refit 1.Fit 8 clips to armature. 2.Position armature fit and tighten nuts to (45 Nm 33 lbf.ft). 3.Position LH carrier and secure with plastic nuts. 4.Position RH bin carrier and secure 2 studs and 3 plastic nuts. 5.Fit bin to loadspace carrier. 6.Fit wheel chock and tool roll. 7.Fit and secure warning triangle. 8.Fit rear quarter trim to LH and RH side, secure with turn buckles. 9.Position luggage space securing ring to body, locate peg. Fit and tighten bolt to25 Nm (18 lbf.ft). 10.Position and fit cover. 11.Fit LH and RH rear quarter trim access panels. 12.Close spare wheel access cover and fit parcel shelf. M86 5827 M76 4566 M76 4540
EXTERIOR FITTINGS REPAIRS 76-2-11 13.Fit rear bumper. + EXTERIOR FITTINGS, REPAIRS, Bumper - rear. 14.Close both tail gates.Bumper - assembly - front $% 76.22.72 Remove 1.Remove front grille. + EXTERIOR FITTINGS, REPAIRS, Front grille. 2.Remove screw securing wheel arch liner to bumper, repeat procedure on opposite side. 3.Release clips and remove towing eye finisher. 4.Remove 6 screws securing bumper valance to undertray. 5.Remove 2 screws securing bumper to armature.
EXTERIOR FITTINGS 76-2-12 REPAIRS 6.Remove 4 screws securing bumper to armature extension. 7.With assistance carefully lift and pull forward each side of bumper to release bumper side mounts and clips. CAUTION: Always protect paintwork when removing or refitting any body trims or bumpers. 8.Disconnect multiplugs from fog lamps. 9. Vehicles fitted with parking sensors: Disconnect 4 multiplugs. 10.Remove front bumper. NOTE: Do not carry out further dismantling if component is removed for access only. 11.Remove front number plate. 12.Remove 4 screws securing number plate mounting to bumper and collect mounting. 13.Remove both spot lamp finishers from bumper. 14.Remove parking sensors from bumper, release clips and remove finishers from sensors. 15.Remove 3 screws securing RH spot lamp to bumper. Repeat operation and remove LH spot lamp. 16.Remove 2 screws securing bumper extensions, release clips and remove extensions. Refit 1.Fit parking sensors to finishers, align sensors to bumper and secure clips. 2.Fit bumper extensions and secure with screws. 3.Fit and secure spot lamps and finishers. 4.Fit number plate mounting to bumper and secure with screws. 5.Fit number plate. 6.With assistance position bumper to body. 7. Vehicles fitted with parking sensors: Connect multiplugs. 8.Connect multiplugs to spotlamps. 9.With assistance, fit bumper assembly to body. M76 4328
EXTERIOR FITTINGS REPAIRS 76-2-13 10.Ensure bumper locating pegs are correctly aligned. 11.Fit and tighten screws securing bumper to bumper armature and undertray. 12.Fit and tighten screws securing wheel arch liners to bumper valance and undertray. 13.Fit and secure towing eye finisher. 14.Fit front grille. + EXTERIOR FITTINGS, REPAIRS, Front grille. Bumper - rear $% 76.22.74 Remove 1.Remove 2 scrivets and 4 screws securing wheel arch liner to rear bumper. 2.Remove 5 screws securing bumper apron to armature.
EXTERIOR FITTINGS 76-2-14 REPAIRS 3.Carefully release 7 clips securing rear bumper finisher, open lower tailgate and remove finisher. 4.Remove 5 screws securing top edge of bumper to armature. 5.Depress 6 clips securing bumper to rear wings and with assistance remove bumper from vehicle. CAUTION: Always protect paintwork when removing or refitting any body trims or bumpers. Refit 1.With assistance position bumper to body. 2.Fit and finger tighten screws securing top edge of bumper to armature. 3.Align bumper sides to rear wings and secure in clips. 4.Fit and tighten bumper apron screws, tighten screws securing top edge of bumper to armature. 5.Position wheel arch liners, secure with screws and scrivets . 6.Fit and secure finisher to bumper. Extension - spoiler - front bumper $% 76.22.78 Remove 1.Release clips and remove towing eye finisher. 2.Remove screw securing bumper extension to wheel arch liner. M76 4356
EXTERIOR FITTINGS REPAIRS 76-2-15 3.Remove 3 screws securing bumper extension to undertray. 4.Remove screw securing extension to bumper. 5.Release extension from wheel arch liner, release clips and remove from bumper. Refit 1.Fit screws and secure bumper extension to front bumper. 2.Fit and tighten screw securing bumper extension to wheel arch liner. 3.Fit and secure towing eye finisher. Finisher - sill $% 76.43.28 Remove 1.Remove 8 scrivets from underside of sill finisher. 2.Carefully release 10 clips securing finisher to sill. Remove sill finisher. NOTE: Do not carry out further dismantling if component is removed for access only. 3.Remove clips from sill finisher. Refit 1.Fit clips to sill finisher. 2.Fit and secure finisher to sill clips. 3.Fit scrivets to sill finisher.