Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Upgrades And Additions Manual

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-33 Standard Reliability 
5
nRoute the c ab le to the c ab le tray and  d own, out of the c ab inet, 
throug h the c ab le manag er to the PDS c ross-c onnec t fac ility.
nConnec t the fib er c ab le to the lig htguid e interc onnec t unit p rovid ed .
nCarefully attac h the fib er c ab le (with c ab le ties) to the wall of the 
c ab le tray at the b uilt-in c ab le tie p ositions.
nCoil up  the surp lus fib er c ab le and  p lac e it in the c ab le manag er.
For Two Fiber-Remoted Expansion Port Networks
1. Behind control carrier A of PPN c abinet 1:
nInstall a lig htwave transc eiver on c ab le c onnec tor at slot 1A02.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
nConnec t a fib er op tic  c ab le to the transc eiver just installed .
nRoute the c ab le to the c ab le tray and  d own, out of the c ab inet, 
throug h the c ab le manag er to the PDS c ross-c onnec t fac ility.
nConnec t the fib er c ab le to the lig htguid e interc onnec t unit p rovid ed .
nCarefully attac h the fib er op tic  c ab le (with c ab le ties) to the wall of 
the c ab le tray at the b uilt-in c ab le tie p ositions.
2. Behind control carrier A of EPN c abinet 3:
nInstall a lig htwave transc eiver on c ab le c onnec tor at slot 3A01.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
nConnec t a fib er op tic  c ab le to the transc eiver just installed .
nRoute the c ab le to the c ab le tray and  d own, out of the c ab inet, 
throug h the c ab le manag er to the PDS c ross-c onnec t fac ility.
nConnec t the fib er c ab le to the lig htguid e interc onnec t unit p rovid ed .
nCarefully attac h the fib er op tic  c ab le (with c ab le ties) to the wall of 
the c ab le tray at the b uilt-in c ab le tie p ositions.
nCoil up  the surp lus fib er c ab le and  p lac e it in the c ab le manag er. 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-34 Standard Reliability 
5
3. Behind control carrier A of EPN c abinet 2:
nInstall a lig htwave transc eiver on c ab le c onnec tor at slot 2A02.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
nConnec t a fib er op tic  c ab le to the transc eiver just installed .
nRoute the c ab le to the c ab le tray and  d own, out of the c ab inet, 
throug h the c ab le manag er to the PDS c ross-c onnec t fac ility.
nConnec t the fib er c ab le to the lig htguid e interc onnec t unit p rovid ed .
nCarefully attac h the fib er op tic  c ab le (with c ab le ties) to the wall of 
the c ab le tray at the b uilt-in c ab le tie p ositions.
4. Behind control carrier A of EPN c abinet 3:
nInstall a lig htwave transc eiver on c ab le c onnec tor at slot 3A02.
NOTE:
Attenuators may be required for single mode fiber using a 
300A Lightwave Transc eiver
nConnec t a fib er op tic  c ab le to the transc eiver just installed .
nRoute the c ab le to the c ab le tray and  d own, out of the c ab inet, 
throug h the c ab le manag er to the PDS c ross-c onnec t fac ility.
nConnec t the fib er c ab le to the lig htguid e interc onnec t unit p rovid ed .
nCarefully attac h the fib er op tic  c ab le (with c ab le ties) to the wall of 
the c ab le tray at the b uilt-in c ab le tie p ositions.
nCoil up  the surp lus fib er c ab le and  p lac e it in the c ab le manag er. 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-35 Standard Reliability 
5
Figure 5-9. Fiber Optic Connections EPN1 to EPN2
Verify Usable Circuit Pack Vintages
Verify that eac h G2 c irc uit p ac k reused  in the up g rad e c onforms to the usab le 
vintage requirements for a Release 8 system (see 
Referenc e Guid e for Circ uit 
Pac k Vintag es and  Chang e Notic es
).
Remove Power-Failure Ground Wire
Remove the 10 AWG (#25) (2.6 mm2) g round  wire from the p ower-failure transfer 
unit.Figure Notes
1. Lightwave Transc eiver
2 . To  EPN 1  C a r r ie r A Sl o t  2 A0 2
3 . To  EPN 2  C a r r ie r A Sl o t  3 A0 2
4. Fiber Optic Cable5. Op tic al Cross-Connec t Fac ility
6. 100A Lig htg uid e Interc onnec t Unit
7. TX Connec tor
8. RX Connec tor
cydf013 CJL102396
RX TX
2
22 1
11
22
11 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-36 Standard Reliability 
5
Boot the Release 8 System
1. Connect the PC to the “ TERMINAL”  c onnec tor b ehind  PPN c ontrol c arrier 
“ A,”  or install the G3-MA ac c ord ing  to the “ Set Up  G3-MA”  c hap ter of 
DEFINITY Communic ations System Generic  3 Manag ement Ap p lic ations 
— Operations.
2. Insert the translation c ard  in the TN794 fac ep late.
3. At the EPN p ower d istribution unit, set the main c irc uit b reaker to ON.
4. At the PPN p ower d istribution unit, set the main c irc uit b reaker to ON.
5. The system performs the reset level 4 rebooting proc ess, loading default 
system translations from the translation c ard . This takes 8 to 11 minutes.
6. Get the ord er numb er of the up g rad e, and  c all the reg ional CSA to req uest 
an “ init”  log in so that the rig ht-to-use op tions c an b e enab led  on the 
up g rad ed  system.
7. To use Ac cess Security Gateway (ASG), see Appendix C, ‘‘Access 
Security Gateway’’. 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-37 Standard Reliability 
5
Set Daylight Savings Rules
You c an set up  to 15 c ustomized  d aylig ht saving s time rules. If you have c ab inets 
in several different time zones, you c an set up  rules for eac h on a loc ation b asis. 
A d aylig ht saving s time rule sp ec ifies the exac t time when you want to transition 
to and  from d aylig ht saving s time. It also sp ec ifies the inc rement at whic h to 
transition. 
NOTE:
The d efault d aylig ht saving s rule is 0
, no d aylig ht saving s.
1. Type change daylight-savings-rules
 and press 
En t e r.
2. Type the appropriate start and stop information in the Change Day
, 
Month
, Date
, Time
, and  Increment
 field s for eac h rule. (for examp le, 
1:00
 eq uals one hour) 
NOTE:
You c an c hang e any rule exc ep t rule 0 (zero). You c annot delete a 
d aylig ht saving s rule if it is in use on either the Loc ations or Date and 
Ti m e  s c re e n s .
3. When d one, p ress 
En te r.
 
DAYLIGHT SAVINGS RULES
Rule Change Day Month___Date Time____Increment
0: No Daylight Savings
1: Start: first Sunday
___ on or after April ___  1 at _2:0001:00Stop:  first Sunday___ on or after October _ 25 at _2:002: Start: first _________ on or after _________ __ at __:__
Stop:  first _________ on or after _________ __ at __:__
3: Start: first _________ on or after _________ __ at __:__
Stop:  first _________ on or after _________ __ at __:__
4: Start: first _________ on or after _________ __ at __:__
Stop:  first _________ on or after _________ __ at __:__
5: Start: first _________ on or after _________ __ at __:__
Stop:  first _________ on or after _________ __ at __:__
6: Start: first _________ on or after _________ __ at __:__
Stop:  first _________ on or after _________ __ at __:__
7: Start: first _________ on or after _________ __ at __:__
Stop:  first _________ on or after _________ __ at __:__ 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-38 Standard Reliability 
5
Set Date and Time
1. Type set time 
and 
press En t e r to b ring  up  the Date and  Time sc reen.
Screen 5-1. Typical Date and Time Screen
2. Typ e the d ay of the week in Eng lish (Sunday throug h Saturd ay). See 
Tab le 5-8
 for Eng lish d ay of the week names.
Table 5-8. English Day of the Week Names
Day Number Day Name
1Sunday
2 Mond ay
3Tuesday
4 Wed nesd ay
5Thursday
6Friday
7Saturday
 
                           DATE AND TIME
DATE
 Day of the Week: Tuesday
Month: FebruaryDay of the Month: 8 Year: 2000
TIME
Hour: 20 Minute: 30Second: XX Type: standardDaylight Savings Rule: 0 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-39 Standard Reliability 
5
3. The c ursor is p ositioned  on the Month:
 field . Typ e the c urrent month in 
Eng lish (January throug h Dec emb er). See Table 5-9
 for Eng lish month 
names. After the month is entered, p ress 
Ta b to move to next field .
4. The c ursor is p ositioned  on the Day of the Month:
 field . Typ e the d ay 
of month (1 through 31) and  p ress 
Ta b to move to the next field.
5. The c ursor is p ositioned  on the Year:
 field . Typ e the c urrent year and  
p ress 
TA B to move to the next field .
6. The c ursor is p ositioned  on the Hour:
 field . Typ e the c urrent hour for a 
24-hour c loc k. Press
 Ta b to move to the next field .
7. The c ursor is p ositioned  on the Minute:
 field . Type c urrent minute (0 
throug h 59). Sec ond s c annot b e set.
8. Type standard
 or daylight savings
 in the Type
 field .
9. Typ e the rule (numb er) in the Daylight Savings Rule
 field.
10. Press 
En t e r when the information is c orrec t.
11. Typ e display time 
and press 
En te r  to verify d ate/time d ata.
Table 5-9. English Month Names
Month Number Month Name
1 January
2February
3March
4April
5May
6June
7July
8August
9 Sep temb er
10 Oc tob er
11 November
12 Dec emb er 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-40 Standard Reliability 
5
Set Additional Administration
1. Type list configuration software-version
 and  p ress En te r  to c omp are the 
version numb er of the Release 8 software p rog ram (d isp layed  on the 
terminal) with the TN786B version numb er (written on a label on the 
TN786B’s fac ep late). If the version numb ers are not the same, c hang e the 
version numb er on the TN786B lab el so that they ag ree. 
2. Type change system-parameters customer-options
 and press 
En te r. 
Use this sc reen to enable the c ustomer’s rig ht-to-use op tions on the 
up g rad e ord er. See 
DEFINITY Enterprise Communic ations Server Release 
8 Ad ministrator’s Guid e
, for d etails.
3. Type change site-data
 and press 
En te r. Use this sc reen to assig n 
system-sp ec ific  information (suc h as b uild ing , floor, stations, and so 
forth).
4. Type save translation
 and press 
En te r. This instruc ts the system to write all 
translation information from memory to the translation c ard .
!CAUTION:
If the terminal sc reen d isp lays “ translation c orrup tion d etec ted ; c all 
Luc ent Tec hnolog ies distrib utor immed iately” , an error was d etec ted  
in the translations. Call your Luc ent Tec hnolog ies rep resentative.
Reconnect Cables to Upgraded EPN Cabinet
1. At the power d istribution unit of the up g rad ed  EPN, set the main c irc uit 
b re a k e r  t o  O FF.
NOTE:
Powering  d own an EPN without p owering  d own the PPN will set off 
alarms. However, these alarms should  c lear after p ower is restored  
to eac h EPN.
2. Temporarily d isc onnec t the lig htwave transc eivers and  fib er op tic  c ab les 
from the ap p ropriate c arriers.
3. Rep lac e the rear d oors or rear p anels p reviously removed .
4. At the EPN c ab inet, rec onnec t the lig htwave transc eivers, fib er op tic  
c ab les, and  the c onnec tor c ab les.
5. Install the front d oor on the EPN c abinet if p reviously removed . 
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-41 Standard Reliability 
5
Power Up the EPN Cabinets
1. At eac h EPN p ower d istrib ution unit, set the main c irc uit breaker to ON. 
After ab out 40 sec ond s, EPN power and  PPN/EPN c ommunic ations return.
2. After p ower returns to eac h EPN and  all troub le is c leared , verify the 
EMERGENCY TRANSFER CONTROL switc h is set to AUTO. This restores 
the system to the normal mod e.
Retranslate Port Circuits
If p ort c irc uit p ac ks in the G2 mod ule c ontrol c arrier were reloc ated  in order to 
p lac e:
nA c ritic al p ort c irc uit p ac k, requiring  long er nominal battery hold over (suc h 
as a DS1 or an Announc ement c irc uit p ac k), in a p ort slot
nA TN736, TN752, or TN755 power sup p ly in p ort slots “ 18”  and  “ 19”
nA TN776 or TN570 Exp ansion Interfac e in p ort slot “ 1”
nA TN776 or TN570 in p ort slot “ 2”  (for a sec ond  d irec tly c onnec ted  EPN)
of the new exp ansion c ontrol c arrier, verify that they were retranslated  d uring  the 
off-site software up g rad e. If not, they must b e retranslated now. Refer to 
DEFINITY Enterp rise Communic ations Server Release 8 Ad ministrator’s Guid e, 
for instruc tions on p erforming  the retranslations.
Enable TTI
Ty p e  change system-parameters features
 and press En t e r. Use this sc reen to 
c hang e the TTI field  b ac k to its p revious value b efore the up g rad e.
Check Link Status
1. Type display communication-interface links
 and press En te r. Compare it 
with the earlier status.
2. Type status link
 
number and  p ress En t e r. Rep eat this step  for eac h link.
Enable Scheduled Maintenance
Ty p e  change system-parameters maintenance
 and press En t e r. Enab le the 
sc hed uled  d aily maintenanc e.
Resolve Alarms
Examine the alarm log . Resolve any alarms that may exist using  DEFINITY 
Enterp rise Communic ations Server Release 8 Maintenanc e for R8r
.  
						

							DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r  555-233-115  Issue 1
April 2000
Multicarrier G2 Universal Module to R8r EPN 
5-42 Standard Reliability 
5
Enable Customer Options and Alarm Origination 
to INADS
1. Get the DOSS order number of the upgrade from the project manager and 
ask the reg ional Customer Software Ad ministration to c omp lete the step s 
in the shad ed  b ox. See ‘‘Where to Call for Tec hnic al Sup p ort’’ on p ag e -xx
 
for telep hone numb ers.
NOTE:
As p art of the system reg istration p roc ess, the INADS Datab ase 
Ad ministrator enab les Alarm Orig ination.
2. When ad ministration is c omp leted , log  in as craft
 at the Login:
 prompt.
Save Translations
1. Type save translation
 and press En te r to g et up g rad ed  translations onto 
d isk. If the translations were c orrup ted  d uring  the up g rad e, the following  
error message displays when logging in:
!WARNING:
Translation c orrup tion d etec ted ; c all Luc ent Tec hnolog ies d istrib utor 
immed iately.
NOTE:
Th e  save translation
 c ommand c annot func tion if the translation 
c orruption messag e ap p ears.
init login administration:
1. Log in as init
.
2. Type change system-parameters customer-options
 and press 
En te r 
to verify that the c ustomer op tions are p roperly set.
3. Go to sc reen 6, QSIG Op tional Features, and  set the Basic Call 
Setup 
field  to y
 if the customer was using Supplementary Services 
Protoc ol b  or d  on an ISDN-PRI trunk g roup  b efore the up g rad e.
4. Type change system-parameters offer-options
 and  p ress 
En te r.
5. If the Activate Offer
 field  is n
, set it to y 
and press 
Ta b. A warning  
messag e lets you know whether you need  to save translations and  
reb oot to make the c hang e p ermanent.
6. Press 
En t e r to effec t the c hang es or Canc el if there were no c hang es.
7. Contac t the req uester when d one.