Panasonic Kx-Tvp150 Voice Processing System Guide

							.., 
_’ 
. . ~-‘, 
,. 
,,;:;j 
:: 
‘ 
34 l Keyboard Operations 
VT220 compatible 
terminal 
or 
Other RS-232C 
terminal 
(ASCII Terminal) 
6 Select 3. Silence Reduction from the Hardware Settings 
Menu. 
Program - Hardware Settings - Silence Reduction Menu 
Silence Reduction Level __-- ______ -- _______.-_______ : Low 
Silence Recording Time (1 - 30) -------------------- : 5 
1: None 2: Low 3: Medium 4: High 
Program - Hardware Setting - Silence Reduction Menu 
1. Silence Reduction Level [Low] 
1: None 2: Low 3: Medium 4: High := 
2. Silence Recording Time [5] (1 - 30) := 
I 1 
7 Set the values according to the work sheets. 
Manager ‘s Guide System Administrator M-3-6 1  
						

							34 0 
Keyboard Operations 
8 
Select 4. PBX Interface Parameters from the Hardware 
Settings Menu. 
A menu will appear. 
VT220 compatible 
terminal 
or 
Other RS-232C 
terminal 
(ASCII Terminal) 
Program - Hardware Settings - PBX Interface Parameters Menu 
1. Dialing Parameters 
2. lnband Signaling 
SELECT ITEM AND PRESS RETURN-KEY 
PBX Type, Integration, Ext. Length Outdial Digits No., 
No-ans Time, Pause Time, Seq. 
Program - Hardware Settings - PBX Interface Parameters Menu 
1. Dialing Parameters 
2. lnband Signaling 
Enter the Number : = 
Press [\] to return to the Hardware Settings Menu. 
M-3-62 
(1292-G) System Administrator 
Manager ‘s Guide  
						

							34 a 
Keyboard Operations 
VT220 compatible 
terminal 
or 
9 Select 1. Dialing Parameters from the PBX Interface 
Parameters Menu. 
Program - Hardware Settings - PBX Interface Parameters 
- Dialing Parameters Menu 
pBX Type ________________________________________--- : 
Tl232 
Inband Integration __________________________________ : Enable 
Extension Length ___________________________________ : 3 
Number of Digits to Access Outside Line ----------- ::I 
No-answer Time (I 0 - 60) _________________________ : 30 
pause Time ----_------------------------------------ : 
2 
Outgoing Call Setup Sequence --------------------- : WW 
Operator Transfer Sequence ------------------------ : FWWX 
Extension Transfer Sequence ----------------------- : FWWX 
Reconnect Sequence on Busy ---------------------- : FWW 
Reconnect Sequence on No-Answer --------------- : FWW 
Reconnect Sequence on Refuse Call --------------- : FWW 
Light-On Sequence for Message Waiting Lamp ----- : W701X# 
Light-Off Sequence for Message Waiting Lamp ---- : W702X# 
CalI Waiting Sequence _____________________________ : 1 
Release for CalI Waiting ____________________________ : F 
Manager ‘s Guide System Administrator M-3-63 (1292-G)  
						

							34 0 
Keyboarc 
Other RS-232C 
terminal 
(ASCI I Terminal) 
Operations 
Program - Hardware Settings - PBX Interface Parameters 
- Dialing Parameters Menu 
I. PBX Type [T1232] 
1: Other Manufacturer 2: KX-T Series := T 
Enter The Model Number 
1 :T308 2:T616 3:T1232 4:T96 5:T336 
6:TD816 7:TD1232 := 
2. lnband Integration [Enable] 
1 :Disable 2:Enable := 
3. Extension Length [3] (2 - 5) := 
4. Number of Digits to Access Outside Line [I] (0 - 8) := 
5. No-answer Time [30] (10 - 60) := 
6. Pause Time [2] (1 - 9) := 
7. Outgoing Call Setup Sequence [WW] 
(F: Flash, R: Ring, T: Tone, S: Silence, W: Transf. Wait) 
Enter The Outgoing Call Setup Sequence := 
8. Operator Transfer Sequence [FWWX] 
(D: Disconnect, F: Flash, R: Ring, T: Tone, S: Silence, 
W: Transf. Wait, X: Ext., A: Answer) 
Enter The Operator Transfer Sequence := 
9. Extension Transfer Sequence [ FWWX ] 
(D: Disconnect, F: Flash, R: Ring, T: Tone, S: Silence, 
.W: Transf. Wait, X: Ext., A: Answer) 
Enter The Extension Transfer Sequence := 
10. Reconnect Sequence on Busy [ FWW ] 
(D: Disconnect, F: Flash, R: Ring, T: Tone, S: Silence, 
W: Transf. Wait, X: Ext.) 
Enter The Reconnect Sequence on Busy := 
11. Reconnect Sequence on No-Answer [ FWW ] 
(D: Disconnect, F: Flash, R: Ring, T: Tone, S: Silence, 
W: Transf. Wait, X: Ext.) 
Enter The Reconnect Sequence on No-Answer := 
12. Reconnect Sequence on Refuse Call [FWW] 
(D: Disconnect, F: Flash, R: Ring, T: Tone, S: Silence, 
W: Transf. Wait, X: Ext.) 
Enter The Reconnect Sequence on Refuse Call := 
13. Light-On Sequence for Message Waiting Lamp [W701 X#] 
(D: Disconnect, F: Flash, R: Ring, T: Tone, S: Silence, 
W: Transf. Wait, X: Ext.) 
Enter The Light-On Sequence for Message Waiting Lamp := 
14. Light-Off Sequence for Message Waiting Lamp [W702X#] 
(D: Disconnect, F: Flash, R: Ring, T: Tone, S: Silence, 
W: Transf. Wait, X: Ext.) 
Enter The Light-Off Sequence for Message Waiting Lamp := 
15. Call Waiting Sequence [I] := 
(F: Flash, R: Ring, T: Tone, S: Silence, W: Transf. Wait) 
Enter the Call Waiting Sequence := 
16. Release Sequence for Call Waiting [F] := 
(F: Flash, R: Ring, T: Tone, S: Silence, W: Transf. Wait) 
Enter the Release Sequence for Call Waiting := 
Set the parameters for your PBX according to the work 
sheets. 
Press [\] to return to the PBX Interface Parameters Menu. 
M-3-63-l 
(1292-G) System Administrator 
Manager’s Guide  
						

							34 0 
Keyboard Operations 
10 
VT220 compatible 
terminal 
or 
Other RS-232C 
terminal 
(ASCII Terminal) Select 2. Inband Signaling from the PBX Interface Param- 
eters Menu. Program - Hardware Settings - PBX Interface Paramgters 
- lnband Signaling Menu 
Ringback ________________________________________---- : 1 ,.,,_,, 
Busy ________________________________________------- : 
2 ,,,,,, 
Reorder ________________________________________---- : 3 ,,,,,, 
DND ________________________________________------- : 4 ,,,,,, 
Answer ________________________________________-----~ 5,,,,,, 
Forward to VM 
Ringing ____________________________ : 6 ,,,,,,, 
Forward to VM Busy ____.__________________________ : 7 ,,,,,,, 
Forward to Other Extension ------------------------ : 8....... 
Confirmation ________________-______________________ : 9 ,,,.,,, 
Disconnect _____________ - ___________________________ : #g ,___ 
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, A, B, C, D 
Program - Hardware Settings - PBX Interface Parameters 
- lnband Signaling Menu 
1. Ringback [I] := 
2. Busy [2] := 
3. Reorder [3] := 
4. DND [4] := 
5. Answer [5] := 
6. Forward to VM Ringing [6] := 
7. Forward to VM Busy [7] := 
8. Forward to Other Extension [8] := 
9. Confirmation [9] := 
10. Disconnect [#9] := 
:. 
‘_‘. 
‘..’ 
Set the Parameters for your PBX according to the work 
sheets. 
Press [\] to return to the PBX Interface Parameters Menu. 
Manager ‘s Guide 
System Administrator M-3-63-2 (1292-G)  
						

							34 0 Keyboard Operations 
3. 4. 5 Custom Service Settings Menu 
1 
Select 5. Custom Service Settings from the System admin- 
istration Top Menu. 
VT220 compatible 
terminal 
and 
‘ 
Other RS-232C 
terminal 
(ASCII Terminal) 
rogram - Custom Service Setting Menu 
1. No Description 9. No Description 
2. No Description 10. No Description 
3. No Description 11. No Description 
4. No Description 12. No Description 
5. No Description 13. No Description 
6. No Description 14. No Description 
7. No Description 15. No Description 
8. No Description 16. No Description 
Select Service (l-l 6) := 
M-3-63-3 
(1292-G) System Administrator 
Manager’s Guide  
						

							34 l Keyboard Operations 
2 Select Service Number. 
VT220 compatible 
Program - Custom Service Setting - Custom 1 terminal 
Please record the menu message : User Prompt No. 110 
Description ________________________________________-: __________ 
_______-__ 
Menu Repeat Cycle (1 -3) __________________________ : 3 timers 
Call Transfer Anytime (Ext/Mbx/No) --------------- : Ext 
Wait for Second Digit(l-5 seconds) ---------------- : 1 seconds 
No DTMF Input Operation (a-f) -------------------- : d 
Keypad Assignment 
1: 
2: 3: 
4: 5: 
7: 
8: g; 
l :d 0: Operator #: (Reserved) 
Please choose one of the following functions or services: . 
a. Transfer to Mailbox g. Voice Mail Service. 
b. Transfer to Extension h. Call Transfer Service. 
c. Operator i. Bulletin Board Service 
d. Exit (Prompt No.1 26) j. Department Dialmg 
e. Previous Menu k. Dial by Name 
f. Custom Service I, Repeat Menu 
Manager’s Guide System Administrator M;:2b623;;4  
						

							34 0 
Keyboard Operations 
Other RS-232C 
terminal 
(ASCII Terminal) 
ogram - Custom Service Setting - Custom 1 
‘lease record the menu message: User Prompt No. 110 
I. Description [ ] 
s 
.- 
.- 
2. Menu Repeat Cycle [3] (1-3 times):= 
3. Call Transfer Anytime [Ext] (Ext/Mbx/No):= 
4. Wait for Second Digit [I] (1-5 seconds):= 
5. No DTMF Input Operation [d](a-f):= 
a. Transfer to Mailbox 
b. Transfer to Extension 
c. Operator 
d. Exit (Prompt No 126) 
e. Previous Menu 
f. Custom Service 
Select Operation:= 
6. Keypad Assignment 
Keypad 1 [ 1 
a. Transfer to Mailbox g. Voice Mail Service 
b. Transfer to Extension h. Call Transfer Service 
c. Operator i. Bulletin Board Service 
d. Exit (Prompt No.1 26) j. Department Dialing 
e. Previous Menu k. Dial by Name 
f. Custom Service I. Repeat Menu 
Select Assignment:= 
Keypad 
2 [ 1 
a. Transfer to Mailbox g. Voice Mail Service 
b. Transfer to Extension h. Call Transfer Service 
c. Operator i. Bulletin Board Service 
d. Exit (Prompt No.1 26) j. Department Dialing 
e. Previous Menu k. Dial by Name 
f. Custom Service I. Repeat Menu 
Select Assignment:= 
Note: Menu messages must be set up to match the Custom Ser- 
vice settings. The menu messages for Custom Services 1 
through 16 correspond to prompt nos. 110 through 125. 
Refer to 5.5 Modifying Voice Prompts in “Detailed Edi- 
tion for Mangers” for further information. 
M-3-63-5 
(1292-G) System Administrator 
Manager ‘s Guide  
						

							34 l Keyboard Operations 
. [: 
:: 
:I. 
3.4.6 System Reports Menu 
1 
Select 2. System Reports from the System Administration 
Top Menu. ? 
VT220 compatible 
terminal 
Other RS-232C 
terminal 
(ASCII Terminal) 
System Reports Menu 
1. Mailbox Assignments 
2. System Service Report 
3. Call Account Report 
4. Port Usage Report 
5. Port Usage Statistics Clear 
6. Disk Usage Report 
7. Disk Usage Statistics Clear 
8. Mailbox Usage Report 
9. Mailbox Usage Statistics Clear 
SELECT ITEM AND PRESS RETURN-KEY 
System Reports Menu 
1. Mailbox Assignments 
2. System Service Report 
3. Call Account Report 
4. Port Usage Report 
5. Port Usage Statistics Clear 
6. Disk Usage Report 
7. Disk Usage Statistics Clear 
8. Mailbox Usage Report 
9. Mailbox Usage Statistics Clear 
Enter The Number : = 
M-3-64 
(1292-G) System Administrator 
Manager ‘s Guide  
						

							Keyboard Operations 
2 Select 1. Mailbox Assignments Menu from the System 
Reports Menu. 
VT220 compatible 
terminal 
** Mailbox assignments 4-JAN-7:46 PM ** 
or 
Other RS-232C 
terminal 
(ASCII Terminal) 
Default: 
Retention 
MSG Length 
MBOX Capacity 5 
(Day) 
3 (Min) 
10 
(Mw) 
MBOX Extn Name COS Retn Capa Leng IM ED MN GA PB 
111 11 JMPT 1 5 10 3 801 
112 12 IWAN 1 5 10 3 802 X X 
113 13 NAKA 1 5 10 3 - - 
114 21 KUME 1 5 10 3 - - 
115 22 SAEK 1 5 10 3 X - 
116 23 HAYA 1 5 10 3 - - 
117 31 ARAM 1 5 10 3 807 - - 
118 32 YASU 1 5 10 3 - 
System Reports - Mailbox Assignments 
l * Mailbox Assignments 4-JAN 7:46 PM ** 
Default: 
Retention 5 (Day) 
MSG Length 
3 (Min) 
M BOX Capacity 10 
(Mw) 
MBOX Extn Name COS RetnCapa Leng IM ED MN GA PB 
111 11 JMPT 1 5 10 3 801 - - - - 
112 12 IWAN 1 5 IO 3 802 - X X 
113 13 NAKA 1 5 10 3 - - - 
114 21 KUME 1 5 10 3 - - 
115 22 SAEK 1 5 10 3 X - - 
116 23 HAYA 1 5 IO 3 - - - 
117 31 ARAM 1 5 10 3 807 - - 
118 32 YASU 1 5 10 3 - - 
Note: 
Retn = Message retention time, Capa = Mailbox Capacity, 
Leng = Maximum message length, IM = Interview mail- 
box, ED = External delivery, MN = Message notification, 
GA = Guest account, PB = Personal bulletin board 
X in the screen indicates that the feature marked with X is 
used. 
Manager’s Guide System Administrator M-3-65