Vodavi Starplus Triad S Description Manual
Have a look at the manual Vodavi Starplus Triad S Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 60 Vodavi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 636
IO-8Least Cost Routing (LCR)
LCR TablesWhere:
RR = Route List Table Number 00-15
T = Time Period Route List l-4
G = CO Line Group l-7
DD = Insert/Delete Table reference 00-19 (## for none)
L = LCR Class of Service (LCOS)
zPress the HOLD button to save the entry. Confirmation tone is heard and the display will
now update.
3To enter additional CO Line groups in the same time period route list number,
Dial:[G] [DD] [L] [HOLD]
To enter data for a different time period route list:IPress program FLASH 75,...](http://img.usermanuals.tech/thumb/5735/86962/w64_vodavi-triad-s-description-install-program_d-635.png "Page 636
IO-8Least Cost Routing (LCR)
LCR TablesWhere:
RR = Route List Table Number 00-15
T = Time Period Route List l-4
G = CO Line Group l-7
DD = Insert/Delete Table reference 00-19 (## for none)
L = LCR Class of Service (LCOS)
zPress the HOLD button to save the entry. Confirmation tone is heard and the display will
now update.
3To enter additional CO Line groups in the same time period route list number,
Dial:[G] [DD] [L] [HOLD]
To enter data for a different time period route list:IPress program FLASH 75,...")
![Page 638
Least Cost Routing (LCR)
LCR Tables
5
NNNNNYY
c 6NNNNN
NY0
S
J = Cannot Use Line Group
Y = Has Access to Line Group
Table 1 O-l: LCR Class of Service Table
Insert / Delete Table
Programming Steps
1Press INSERT/DELETE TABLE flexible button (FLASH 75, Button #5). The following
message will be shown on the display phone:
IDIGIT INSERT
/ DELETE
ENTER TT X DDD HOLD
I
zEnter the table information as follows:
Where:
T T = Insert/Delete Table Number 00-19
X = [0] Pre-Delete numbers (first digits dialed in the...](http://img.usermanuals.tech/thumb/5735/86962/w64_vodavi-triad-s-description-install-program_d-637.png "Page 638
Least Cost Routing (LCR)
LCR Tables
5
NNNNNYY
c 6NNNNN
NY0
S
J = Cannot Use Line Group
Y = Has Access to Line Group
Table 1 O-l: LCR Class of Service Table
Insert / Delete Table
Programming Steps
1Press INSERT/DELETE TABLE flexible button (FLASH 75, Button #5). The following
message will be shown on the display phone:
IDIGIT INSERT
/ DELETE
ENTER TT X DDD HOLD
I
zEnter the table information as follows:
Where:
T T = Insert/Delete Table Number 00-19
X = [0] Pre-Delete numbers (first digits dialed in the...")
![Page 639
Least Cost Routing (LCR)
LCR TablesIO-II
3Press the HOLD button to save the entry. Confirmation tone is heard and the display
updates.
To add and delete numbers in the same table, enter the different Insertion/Deletion tables in step 1, and
enter
as separate entries using the same table number. In the Insert Tables for LCR programming:
1Press the TRANS button for a pause.
The
[a] and [#] digits are allowed as valid digits for inserting digits dialed over the
network.
The
[%I and [#] are valid entries...](http://img.usermanuals.tech/thumb/5735/86962/w64_vodavi-triad-s-description-install-program_d-638.png "Page 639
Least Cost Routing (LCR)
LCR TablesIO-II
3Press the HOLD button to save the entry. Confirmation tone is heard and the display
updates.
To add and delete numbers in the same table, enter the different Insertion/Deletion tables in step 1, and
enter
as separate entries using the same table number. In the Insert Tables for LCR programming:
1Press the TRANS button for a pause.
The
[a] and [#] digits are allowed as valid digits for inserting digits dialed over the
network.
The
[%I and [#] are valid entries...")
![Page 641
Least Cost Routing (LCR)
LCR Tables
2300 (11100 pm)Figure 1 O-2: Daily Start Time and Weekly Schedule Tables
Weekly Schedule Table
Programming Steps
1Press the WEEKLY SCHED flexible button (FLASH 75. Button #7). The following
message displays on the phone:
WEEKLY SCHEDULE TABLEENTER D T T T T HOLD
..Where:
D = Day of the Week:
[0] = Monday
[4] = Friday
[I] = Tuesday
[5] = Saturday
[2] = Wednesday[6] = Sunday
[3] = Thursday
T = Time Period Route List (l-4) to use for the time-of-day (based on the Daily...](http://img.usermanuals.tech/thumb/5735/86962/w64_vodavi-triad-s-description-install-program_d-640.png "Page 641
Least Cost Routing (LCR)
LCR Tables
2300 (11100 pm)Figure 1 O-2: Daily Start Time and Weekly Schedule Tables
Weekly Schedule Table
Programming Steps
1Press the WEEKLY SCHED flexible button (FLASH 75. Button #7). The following
message displays on the phone:
WEEKLY SCHEDULE TABLEENTER D T T T T HOLD
..Where:
D = Day of the Week:
[0] = Monday
[4] = Friday
[I] = Tuesday
[5] = Saturday
[2] = Wednesday[6] = Sunday
[3] = Thursday
T = Time Period Route List (l-4) to use for the time-of-day (based on the Daily...")
![Page 645
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to program here,
enter the programming mode. If Database Parameters must be initialized:
1Press FLASH and dial [80]. The following message displays on a display phone:
INITIALIZE DATABASE
ENTER BUTTON NUMBER
.
Description
This section describes the procedures and steps necessary to initialize the system database, returning any
programmed data to its original or default value. This section lets...](http://img.usermanuals.tech/thumb/5735/86962/w64_vodavi-triad-s-description-install-program_d-644.png "Page 645
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to program here,
enter the programming mode. If Database Parameters must be initialized:
1Press FLASH and dial [80]. The following message displays on a display phone:
INITIALIZE DATABASE
ENTER BUTTON NUMBER
.
Description
This section describes the procedures and steps necessary to initialize the system database, returning any
programmed data to its original or default value. This section lets...")
Least Cost Routing (LCR) LCR Tables 2300 (11100 pm)Figure 1 O-2: Daily Start Time and Weekly Schedule Tables Weekly Schedule Table Programming Steps 1Press the WEEKLY SCHED flexible button (FLASH 75. Button #7). The following message displays on the phone: WEEKLY SCHEDULE TABLEENTER D T T T T HOLD ..Where: D = Day of the Week: [0] = Monday [4] = Friday [I] = Tuesday [5] = Saturday [2] = Wednesday[6] = Sunday [3] = Thursday T = Time Period Route List (l-4) to use for the time-of-day (based on the Daily Start Time table). Enter values for all time periods specified in the Daily Start Time table for that day. First T = Time Period Route List for the FIRST Daily Start Time (applies to all Route List tables). Second T = Time Period Route List for the SECOND Daily Start Time (applies to all Route List tables). Third T = Time Period Route List for the THIRD Daily Start Time (applies to all Route List tables). Fourth T = Time Period Route List for the FOURTH Daily Start Time (applies to all Route List tables). STARPLUS Triad-S System Programming ManualIssue 7 - December 1998
Least Cost Routing (LCR) LCR Tables 2Press the HOLD button after each complete daily entry. Confirmation tone is heard and the display updates. Description The weekly schedule table determines what Time Period Route list to use within the Route List table. When a call is placed and ultimately sent to a route list (call is not denied) based on the time of day the call is placed, the Daily Start Time table selects the time period to reference in the weekly schedule table. The time period route entered for the specified time period, as determined in the Daily Start Time table and based on the day of week, is then selected and the call will be routed according to the specified time period route list. Example: If a call is placed at 5:45 pm on a Monday, then according to the Daily Start Time table (using default values) the entry for time period two of the weekly schedule is checked. Because it is Monday the entry for time period two on Monday is used and the result is that the Time Period Route List number two (again using default values) will be used for all routes. Thus, the call is routed according to the entries in Time Period Two route list no matter what route (00-15) is selected.1700 (5~00 pm) 2300 (11100 pm) ##I# (not used) Day Call is placedI I=Monday5,rr,*‘.,*e+;/ _, _*, !,.W ,r*^.“%,,#P I-d_ i,Figure 10-3: Daily and Weekly Start Time Table LCR Routing for Toll Information Programming Steps IPress the TOLL INFO flexible button (FLASH 75, Button #8). The following message displays on the phone: LCR ROUTE FOR 555-1212 ENTER ROUTE Issue I- December 1998STARPLUS Triad-S System Programming Manual
:: Least Cost Routing (LCR) LCR TablesIO-15 aEnter the two-digit Route List number (00-15) for the Route to be referenced in the Route List table. 3Press the HOLD button after programming the Route number. Confirmation tone is heard and the display will now update. 4Enable LCR at this point. Description This feature adds provisions to the LCR call processing which will allow common call routing for all toll information calls. I-(XXX) 555-1212, (K@ 555-1212,1-555-1212 and 555-1212 calls will all be intercepted and sent to a selected route in the Route List table. Numbers dialed will be integrated and if it is determined to be a toll information call, either preceded with an area code or without or with a leading digit 1 or not, the call will be sent to the route designated in programming. By default, Toll Information Calls will be sent to Route List table zero (0) which will allow toll information calls to be placed on the system at default. A Toll Information route is chosen over a j-digit or 6-digit route assignment if both are assigned. Entering the pound key twice [##I denies all Toll Information calls. Def auk LCR Database Programming Steps In an effort to decrease installation and set up time usually associated with LCR, a default LCR database was incorporated. Description The default LCR database provides basic routing for local and long distance dialing. Default entries have been made in the 3-digit table for local office codes (NNXS) and all area codes (NPAs). Six routes have been established with the default database for routing of all calls under default. STARPLUS Triad-S System Programming ManualIssue I- December 1998
I IO-16Least Cost Routing (LCR) LCR Tables Issue 1 - December 1998STARPLUS Triad-S System Programming Manual
Programming Steps If the system is in the programming mode, continue using the program codes. If starting to program here, enter the programming mode. If Database Parameters must be initialized: 1Press FLASH and dial [80]. The following message displays on a display phone: INITIALIZE DATABASE ENTER BUTTON NUMBER . Description This section describes the procedures and steps necessary to initialize the system database, returning any programmed data to its original or default value. This section lets portions of the database be initialized individually. This initialization occurs regardless of the position of switch #8 on the MPB. The only way to initialize the entire database is to move switch #8 on the MPB board to the ON position and reset or power off/on the system. In addition to initialization of the entire database, a System Reset (button #20) command is also included in this section for clearing meantime errors without initializing the database, The buttons on the key telephone are defined as shown below when entering the Initialize Database Parameters programming area:Issue I- December 1998 STARPLUS Triad-S System Programming Manual
Initialize Database ParametersIntroductionSYSTEM PARAMETERS 4k;:EXCEPTION TABLES #15DIRECTORY DIAL TABLE slg 1113 *117 6121CO LINE ATTRIBUTES *lziaSYSTEM SPEED NUMBERS #IsHUNT GROUPS s#-ACCT CODES %+114STATION ATTRIBUTESPORT - STA/CO *EcIEl +%DLCR TABLES ICLID-DIDTABLES gm *LEil ACD* OR UCDVOICEMAIL GROUPS GROUPS %a %112 Initialize System Parameters Programming Steps 1Press the SYSTEM PARAMETERS flexible button (FLASH 80, button #l). The following message displays on the phone: .INITIALIZE SYS PARAM PRESS HOLD . 2To initialize the System Parameters, press the HOLD button. Confirmation tone is heard. Description The system parameters may be initialized setting all data fields to their original, default values. The following data fields are returned to their default values upon initializing the System Parameters.Issue I- December 1998 STARPLUS Triad-S System Programming Manual ;:I . ..l.
Initialize Database Parameters IntroductionTable 1 l-l: System Parameter Defaults STARPLUS Triad-S System Programming Manualissue I- December 1998
Initialize Database Parameters Introduction Program Code -lash 02 -lash 02 -lash 05 T Flex ButtonFeaturesDef auk ValueAfter Initlallza tionADDITIONAL SYSTEM TIMERS 1Repeat Redial Timer 2Attendant Display Timer 3Call Coverage Ring Timer 4Modem Answer T / 0 5Pulse Dial Inter-Digit Timer60 sec. 1 sec. 5 sec.25 sec. 300 ms 6Programmable DTMF Time Operation1 OOms on/l OOmsoff I SYSTEM FEATURES 1 1Attendant Override1 Disabled 2Hold Preference 3External Night Ring 4Executive Override Warning Tone 5Page Warning Tone 6Background Music Channel 7Least Cost Routing 8Account Codes - Forced 9Group Listening 10Idle Speaker Mode 11Call Cost Display Feature System DisabledEnabled Enabled Enabled Disabled Disabled Disabled Disabled Disabled 12IMusic-On-Hold( EnabledI 13I Call Qualifier Tone OptionDisabled Table 11-1: System Parameter Defaults Issue 7 - December 7998STARPLUS Triad-S System Programming Manual
Initialize Database Parameters Introduction Program Code -lash 06 Flex ButtonFeaturesSYSTEMFEATURES 1Privacy Release Tone Option 2Distinctive CO Ringing 3Verified Account Codes Default ValueAfter lnltializa tionEnabled Enabled Disabled 41 Call Forward Display1 Enabled 5( External Day Ring IDisabledI 6Overflow Station ForwardDisabled 7Direct Transfer Mode Enabled II a) Station ID Lock) Disabled 9LCR Call ProgressEnabled 10One-Touch Recording Warning Tone Enabled 11 12Ringback on TransferDisabledTable II-I: System Parameter Defaults STARPLUS Triad-S System Programming Manualissue I- December 1998
Initialize Database Parameters Introduction Program Code -lash 07 Flash 09 Flash 10 Flex ButtonFLASH RATESFeaturesDef auk ValueAfter hi tJaliza t/on,t.?;‘;...“.. :., . .. . .L ,... . .‘. .: I’: ’ 1Incoming CO Line Ringing Red 480 ipm flutter 21 Incoming Intercom Ringing 1 Red 120 ipm flutter 1 3Call Forward Button 1 Red Steady On 4I Message Wait/VM Button) Red Steady On 5 6 7 8 9 10 11 12Message CallBack - DSS/BLFRed 120 ipm flutter Do Not Disturb - DSS/BLF Red 60 ipm flash Auto CallBack - DSS/BLFRed 120 ipm flash UCD Available/Unavailable - DSS/BLF Red 60 ipm flash Transfer CO RingingRed 120 ipm flash Recall CO Ringing Red 480 ipm flutter Queued CO RingingGreen 480 ipm flutter Exclusive Hold Green 120 ipm flash 13I System Hold I Red 60 ipm dbl wink I 14) In Use Hold (I-Hold)I Green 60 ipm flash )15 I Camp-On ButtonI Red 120 ipm flashI 16Call Back Button Red 120 ipm flash 17Line Queue ButtonRed 480 ipm flutter 18Do Not Disturb Button Red Steady On 19Intercom Hold Button Red 15 ipm flash l-71 I Leading Digit l-7None 8Leading Digit Option Disabled 9Centrex Digit Length 4 digits 10Four Digit Voice Mail ID 3 digits ,