Vodavi Starplus Triad S Description Manual
Have a look at the manual Vodavi Starplus Triad S Description Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 60 Vodavi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LIQUID CRYSTAL DISPLAYS 8-7 INTRODUCTION FUNCTIONCALLING STATION CALLED STATION DIS-DISPLAY PLAY -j7iisEq~ ACD* or UCD Groups -1Ringing CO Lines FFitl;ayeSecurityyStation Forwarding Off-Net 11Call to Station Forwarded Off -Net (before and after a call is answered) ~~ LINE XXXHH:MM:SSCalls in Queue (Supervisor) ~Calls in Queue (Using Dial Code) ACD* or UCD 5Unavailable Mode ~~;p~;~)qi* Features available with optional software Table 8-l: Liquid Crystal Displays (LCD) STARPLUS Triad-S Product Description ManualIssue I- November 1998
8-8LIQUID CRYSTAL DISPLAYS INTRODUCTION FUNCTION Station call to Voice Mail Group Pilot Number Dial By NameOff-Hook Voice Over (OHVO) Executive Override Voice Mail* Transfer with ID Digits Repeat Redial Call Coverage Station After call is answered at coverage station.CALLING STATION DISPLAY CALL TO VOICE MAILMMM DD YYHH:MM am ANNOUNCE TO STA XXX MMM DD YY HH:MM am MONITORING STA XXXMMM DD YYHH:MM am CALL TO VOICE MAIL VIA XXXMMM DD YY RPT REDIAL CALLBACK: MMM DD YYHH:MM pm CALL TO STA XXMMM DD YYHH:MM am CALL TO STATION XXX FROM STA YYY HH:MM amCALLED STATION DIS- PLAY ANNOUNCE FROM STA XXXMMM DD YYHH:MM am * Features available with optional software Table 8-l: Liquid Crystal Displays (LCD)
LIQUID CRYSTAL DISPLAYS 8-9 INTRODUCTION FUNCTIONCALLING STATION CALLED STATION DIS-DISPLAY PLAY Name/Number Display at IdleScrollable Canned Messages ~ACD* Transfer Display uACD* Overflow Station receives an Overflow Call /IAnswering Machine Emulation: When a call rinogiethe station in ringAnswering Machine Emulation: When stationmonitors caller in VM.* Features available with optional software Table 8-l: Liquid Crystal Displays (LCD) STARPLUS Triad-S Product Description Manual Issue I- November 7998
I -.-... . . . .-...8-10LIQUID CRYSTAL DISPLAYS INTRODUCTION Issue I - November 1998STARPLUS Triad-S Product Description Manual
c$$ General Description TheSTARPLUs Triad4Pf is a digital telephone system designed to meet the needs of small size business offices, The system incorporates state-of-the-art digital technology for command and voice switching utilizing a Pulse Code Modulation/Time Division Multiplexing switching matrix. The system achieves flexibility by employing a universal card slot architecture with Basic and Expansion cabinets. These cabinets house plug- in circuit boards that support different types of telephone instruments. The system begins at a 3-line, g-station capacity and can expand to a maximum configuration of a 12-line, 32-station capacity. Expansion is accomplished in 3-line, S-station increments. The system supports proprietary digital terminals or standard touch tone 2500-type terminals. Basic Key Service Unit (BKSU) The Triad-S Basic Key Service Unit (BKSU) is a wall mountable cabinet that houses the following: + Main CPU board + System ROM 0 System RAM +z+ Power supply +Circuitry to support two 3x8 boards and the expansion cabinet with two 3x8 boards Thus, the maximum capacity of the BKSU is 6 CO lines and 16 stations (8 digital and 8 digital or SLT). Every BKSU supports three loop start CO lines and eight standard digital station interfaces from the factory. The BKSU also has these standard features: e1 Program Module Unit (PMU) that provides system software (sold separately) Q1 DTMF Receiver (for DIWSLT applications) +2 Programmable relays with dry contacts rated at 24V DC, 1 amp.,. ..,.. -6-_ .._, cY-y’;;+1 External Page Port1.. .-- ::’+:bBattery Backup for System Database 0i Music Input (MOHBCM) The BKSU main board can accept the following modules: Issue I- December 1998STARPLUS Triad-S Product Description Manual
Q-2SYSTEM CONFIGURATION Expansion Key Service Unit (EKSU) .:.1 Miscellaneous Service Unit (MIS@ that provides two RS232C/9 pin ports and second music source circuitry 91 Modem Unit (MODU, 9600 baud modem) for remote administration +1 4 Circuit DTMF Receiver (DTMF-A) provides 4 DTMF receivers 61 3x8 CKIB or 3x8 CSIB (one CKIB installed in every BKSU standard) A number 12 AWG copper wire should be used to ground between the ground source and the BKSU (25 feet maximum). Attach this wire to the ground lug on the lower right side of the BKSU. Expansion Key Service Unit (EKSU) The Triad-S Expansion Key Service (EKSU) is a wall-mountable cabinet that houses the circuitry to support two 3x8 boards. The EKSU mounts directly above the BKSU. The EKSU has cables that connect power and digital communications form the EKSU to the BKSU. The EKSU can provide six additional CO lines and sixteen station growth that takes the system to it’s maximum configuration of twelve CO lines and 32 stations. The EKSU contains one expansion interface board (EIB) which includes power supply and connector interface buses. A number 12 AWG copper wire should be used to ground between the ground source and the BKSU (25 feet maximum). Attach this wire to the ground lug on the right side of the EKSU. Peripheral Boards Three 8 CO Line and Eight Digital Station Board (CKIB) This board provides three loop start CO line interfaces and eight Digital Key Telephone interfaces. This board can be installed in the BKSU or EKSU. If all CKIB boards are installed in the BKSU and EKSU, the system capacity is 12 CO lines and 32 digital stations. The CO line interfaces are brought out on the right side of the BKSU/EKSU utilizing RJll connectors. The digital station interfaces are brought out utilizing a 50-pin amphenol connector on the left side of the BKSU/EKSU. The station interface for stations loo-107 also provides the wiring interface for the additional features that require input/output connections. These features are music sources, relay connections, and external page connections. Issue 1 - December 1998STARPLUS Triad-S Product Description Manual
SYSTEM CONFIGURATIONOptional Boards Three 8 CO Line and 8 Single Line Station Board (CSIB) This board provides three loop start CO line interfaces and eight Single Line Telephone interfaces. These interfaces support 2500 touch tone telephone instruments and/or voice mail interfaces. This board can be installed in the BKSU or EKSU. A maximum of three CSIBs may be installed between the BKSU/EKSU to provide a maximum of 24 single line interfaces. The CO line interfaces are brought out on the right side of the BKSU/EKSU utilizing RJll connectors. The digital station interfaces are brought out utilizing a 50-pin amphenol connector on the left side of the BKSU/EKSU. The CSIB can accept the optional Message Wait Unit (MSGU) to provide message wait lamp capability to the eight instruments attached. Optional Boards Miscellaneous Service Unit (MISU) This board provides two RS232C interfaces for system programming, caller ID, and SMDR applications. The board also contains a second music source to increase the music channels in the system from one to two. The board installs in the BKSU. Modem Unit (MODU) This board provides a 9600 baud modem for remote system programming. The modem is accessed by dialing station 499. Message Wait Unit (MSGU) This board provides message wait lamp capability to the eight attached SLT instruments. This board is installed on the CSIB. Each CSIB may have one MSGU installed.DTMF Receiver Unit (DTMF-A) This board provides four DTMF receivers for CSIB use and should be installed any time a CSIB board is installed in the system. The BKSU supports one DTMF-A unit. STARPLUS Triad-S Product Description Manual Issue I- December 1998
: Q-4SYSTEM CONFIGURATION Optional Boards Basic $ p KSU u u EI EKSU B g,:.;?; ‘,I..::. . . . . ;: I --. CKIBCSIBDTMF4-AMISBMODUCKIBCSIB IMSGUMSGU Figure 9-1: Starplus Triad-S SystemBKSU Caoacity CO/PBWCentrex Lines: Station: Digital Terminal: Single Line Telephone: BKSU + EKSU Capacity COlPBWCentrex Lines: Station: Digital Terminal: Single line Telephone: DTMF Receiver6 lines maximum (3 per CKIBESIB board) 16 maximum (8 per CKIB board) 8 maximum (8 per CSIB board) 12 lines maximum32 maximum (8 per CKIB board) 24 maximum (8 per CSIB board) ( (System max: 12 lines, 8 digital telephones, 24 SLT) Basic: 1 eachWith DTMF4-A: 5 (Provides 4 additional services) DTMF Sender l/O Ports Conference Circuit: Parties: DISA Circuit Attendants Unlimited2 maximum with MISU5 conference per system 8 parties per conference (5 of the 8 can be external) 12 CO lines may be programmed simultaneously Up to 3 stations can be designated as attendants Table 9-l: Digital System Capacity Issue I- December 1998STARPLUS Triad-S Product Description Manual
SYSTEM CONFIGURATIONOptional BoardsDigital DSS/DLS Units Loop Supervision Disconnect Paae Zones Internal Paging: External Paging: (One/Two Way) Hunt Groups Groups: Members: Types: Voice Mail Groups Groups: Members (Ports): Integrated Method: VM Message Wait: VM Disconnect Signal:ACD Groups Groups: Members: RAN Announcements: Calls in Queue:UCD Groups Groups: Members: RAN Announcements: Calls in Queue:8 maximum - each DSWDLS unit requires 1 station port and reduces station capacity by 1. DSWDLS maps may not be duplicated at a station. One station may have up to three DSWDLS units associated with it. 700 msec. duration - CO or Internal Call to SLT 4 maximum - software controlled 1 maximumSoftware supports up to 8 groups Software supports up to 8 stations in each group Station or Pilot Hunting Software supports up to 8 groups Software supports up to 8 stations In-band signalling (DTMF) Programmable 12-digit (DTMF) string If no digits are programmed, 15 seconds of silence followed by busy tone Software supports up to 16 groups Software supports up to 16 stations in each group Eight RAN Announcements per system, 3 per ACD group All CO lines may be queued for an ACD group Software supports up to 8 groups Software supports up to 8 stations in each group Eight RAN Announcements per system, 3 per UCD group All CO lines may be queued for a UCD group Table 9-l: Digital System Capacity AC Input to Power Supply Power Consumption 117 VACkl 0%, 60Hz single phase74 watts1 Power Supply Fuse - AC Input1 lA/250VI Table 9-2: Electrical Specifications STARPLUS Triad-S Product Description Manualissue I- December 1998
Q-6SYSTEM CONFIGURATION Optional Boards Longitudinal Balance Idle Channel Noise Cross Talk Attenuation60 dB from 200 Hz to 1,000 Hz 40 dB from 1.000 Hz to 40,000 Hz Less than 15 dBrnc0 for all connections Greater than 80 dBm Station to CO andStation to Station Single Frequency Distortion 300 Hz - 3,400 HzStation to CO and Station to Station: Better than 2.0% or 34 dB for an output Level - 30 dBm to 0 dBm Ringing Sensitivity16 Hz to 30 Hz at 40 Vrms minimum 03 Hz to 67 Hz at 50 Vrms minimum CO Line Signaling - DTMFFrequency pair at -5 dBm f 0.5 dBmFrequency tolerance f 1.5% CO Line Signaling - Dial Pulse Input Level Music Source10 PPS +I 0 dB maximum Music on Hold/Background Music Input600 ohm input at 0 dBm maximum from music source Contact Rating Multipurpose Relay1 amp @ 24 V DC (two on MBU board) External Paae Port Output Impedance600 ohm @ 0 dBm Output Power without Compression5 milli-watt maximum CSA File Number (NRTUC)LR85633 Table 9-2: Electrical Specifications Operating Temperature 328 to 104s F0s to 40s C Optimum Temperature60~ to 80s F15s to 26s C Storage Temperature-4Oe to 140e F4s to 60e C IRelative Humidity15% to 90% non-condensing Heat Dissipation (BTU)1481 BTU/Hour Table 9-3: Environmental Specifications Issue 1 - December 1998STARPLUS Triad-S Product Description Manual