Samsung LE 32C550 User Manual

							41English
05
Other Information
Installing the Wall Mount
Assembling the  ¦Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket into the\
 part 
that connects to the stand as shown in the picture.
Preparing before installing Wall-Mount (46inch TV) ¦
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount Kit ¦
Wall mount items (sold separately) allow you to mount the TV on the wal\
l.
For detailed information on installing the wall mount, see the instructi\
ons provided with the Wall Mount items. Contact a 
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the 
TV on your own.
Blanking bracket
[LC550-XH]BN68-02688P.indb   412010-10-27   �� 12:33:02 
						

							42English
Other Information
Wall Mount Kit Specifications (VESA)  ¦
Wall mount kit is not supplied but sold separately. ✎
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact 
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.NOTE
 ✎
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mo\
unt is used or  xthe consumer fails to follow the product installation instructions.
Standard dimensions for wall mount kits are shown in the table below.
 x
When purchasing our wall mount kit, a detailed installation manual and all parts\
 necessary for assembly are provided. x
Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. x
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ  xdepending on their specifications.
Do not use screws that do not comply with the VESA standard screw specifications.
 x
Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal  xinjury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mo\
unt is used or 
 xthe consumer fails to follow the product installation instructions.
Do not exceed 15 degrees tilt when mounting this TV.
 x
Product Familyinches VESA Spec. (A * B) Standard ScrewQuantity
LCD-TV
19~2275 X 75
100 X 100 M4
4
23~29
200 X 100
30~40 200 X 200 M6
46~55 400 X 400
M8
57~65
600 X 400
70~80 800 X 400
80~ 1400 X 800
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
Assembling the Cables
Enclose the cables in the Cable tie so that the cables are not visible through the 
transparent stand.
Cable tie
[LC550-XH]BN68-02688P.indb   422010-10-27   �� 12:33:03 
						

							43English
05
Other Information
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when\
 using it in 
a public place. The appearance and locking method may differ from the illustration 
depending on the manufacturer. Refer to the manual provided with the Kensington 
Lock for proper use.Please find a “
 ✎K” icon on the rear of the T V. A kensington slot is beside the “ K” 
icon.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or 
chair.
2. Slide the end of the cable with the lock attached through the looped end of the 
Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
These are general instructions. For exact instructions, see the User manual supplied with the locking device.
 ✎
The locking device has to be purchased separately. ✎
The location of the Kensington Lock may be different depending on its model. ✎
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In\
 particular, ensure that your 
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious 
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install 
the anti-fall device for safety purposes, as follows.
To avoid the TV from falling  ¦
Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. ✎
1. Drive the screws into the clamps and firmly fasten them onto the wall. Make sure the screws are firmly fixed into the wall. 
Screw Specifications
 ✎
For a 32 ~ 40 Inch LCD TV: M6  x
For a 46 ~ 55 Inch LCD TV : M8 x
2. Remove the screws from the centre back of the TV, put the 
screws into the clamps, and then fasten the screws onto the TV 
again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto 
the wall with a strong string and then tie the string tightly.
Verify all connections are properly secured. Periodically check 
 ✎connections for any sign of fatigue for failure. If you have 
any doubt about the security of your connections, contact a 
professional installer.
Install the TV near to the wall so that it does not fall backwards.
 ✎
It is safe to connect the string so that the clamps fixed on the  ✎wall are equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
 ✎
Wall
1

[LC550-XH]BN68-02688P.indb   432010-10-27   �� 12:33:04                                 
						

							44English
Other Information
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
IssuesSolutions and Explanations
Picture QualityFirst of all, please perform the Picture Test and confirm that your TV is properly displaying test image. 
(go to MENU - Support - Self Diagnosis - Picture Test) (P. 20)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it 
did in the store. If you have an analogue cable/set top box, upgrade to a digital set top \
box. Use HDMI or Component 
•	
cables to deliver HD (high definition) picture quality.
Cable/Satellite subscribers: Try HD stations from the channel line up.
•	
Antenna connection: Try HD stations after performing Auto programme.
•	
Many HD channels are upscaled from SD(Standard Definition) contents.
 ✎Adjust the Cable/Set top box video output resolution to 1080i or 720p.
•	
Make sure you are watching the TV at the minimum recommended distance based on the size and 
•	
definition of the signal.
The picture is distorted: macroblock error, 
small block, dots, pixelization Compression of video contents may cause picture distortion especially in fast moving pictures such 
•	
as sports and action movies.
Low signal level or bad quality can cause picture distortion. This is not a TV issue.
•	
Mobile phones used close to the TV (up to 3.3ft) may cause noise in pi\
cture on analog and digital TV.
•	
Colour is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the 
•	
correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness. Adjust the 
•	 Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
Adjust 
•	 Energy Saving option in the TV menu. (go to MENU - Picture - ECO solution - Energy 
Saving) (P.14)
Try resetting the picture to view the default picture settings. (go to 
•	 MENU - Picture - Picture Reset)
There is a dotted line on the edge of the 
screen. If the picture size is set to 
•	 Screen Fit, change it to 16:9. (P. 15)
Change cable/set top box resolution.
•	
The picture is black and white. If you are using an AV composite input, connect the video cable (yellow) to the Green jack of 
•	
component input 1 on the TV.
When changing channels, the picture 
freezes or is distorted or delayed. If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until 
•	
the cable box reboots. It may take up to 20 minutes.
Set the output resolution of the cable box to 1080i or 720p.
•	
Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (P. 20)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low 
at maximum volume. Please check the volume the of external device connected to your TV.
•	
The picture is good but there is no sound. Set the 
•	 Speaker Select option to TV speaker in the Sound menu. (P. 17)
If you are using an external device, make sure the audio cables are connected to the correct audio 
•	
input jacks on the TV.
If you are using an external device, check the device’s audio output option (ex. you may need to 
•	
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
If you are using a DVI to HDMI cable, a separate audio cable is required.
•	
If your TV has a headphone jack, make sure there is nothing plugged into it.
•	
The speakers are making an inappropriate 
noise. Check the cable connections. Make sure a video cable is not connected to an audio input.
•	
For antenna or cable connections, check the signal strength. Low signal level may cause sound 
•	
distortion.
[LC550-XH]BN68-02688P.indb   442010-10-27   �� 12:33:04 
						

							45English
05
Other Information
IssuesSolutions and Explanations
No Picture, No Video
The TV will not turn on.Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
•	
Make sure the wall outlet is working.
•	
Try pressing the 
•	 POWER button on the TV to make sure the problem is not the remote. If the TV turns 
on, refer to “The remote control does not work” below.
The TV turns off automatically. Ensure the 
•	 Sleep Timer is set to Off  in the Setup menu. (P. 18)
If your PC is connected to the TV, check your PC power settings.
•	
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
•	
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if 
•	
there is no signal.
There is no picture/Video. Check cable connections (remove and reconnect all cables connected to the TV and external 
•	
devices).
Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to\
 match the 
•	
connections to the TV input. For example, if an external device’s output is HDMI, it should be connect 
to an HDMI input on the TV.
Make sure your connected devices are powered on.
•	
Be sure to select the TV’s correct source by pressing the 
•	 SOURCE button on the TV remote.
RF(Cable/Antenna) Connection
The TV is not receiving all channels. Make sure the Antenna cable is connected securely.
•	
Please try 
•	 Plug & Play (Initial setup) to add available channels to the channel list. Go to \
MENU - 
Setup - Plug & Play (Initial setup) and wait for all available channels to be stored.
Verify the Antenna is positioned correctly.
•	
The picture is distorted: macroblock error 
small block, dots, pixelization Compression of video contents may cause picture distortion, especially with fast moving pictures 
•	
such as sports and action movies.
A low signal can cause picture distortion. This is not a TV issue.
•	
PC Connection
A “Mode Not Supported” message 
appears. Set your PC’s output resolution and frequency so they match the resolutions supported by the TV. (P. 
•	
20)
“PC” is always shown on the source list, 
even if a PC is not connected. This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
•	
The video is OK but there is no audio. If you are using a HDMI connection, check the audio output setting on your PC.
•	
Network Connection (Depending on Models)
Wireless network connection failed. Samsung Wireless USB dongle is required to use a wireless network.
•	
Make sure the Network Connection is set to Wireless.
•	
Make sure the TV is be connected to a wireless IP sharer (router).
•	
Others
The picture will not display in full screen. HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3) 
•	
contents.
Black bars on  the top and bottom will appear during movies that have as\
pect ratios different from 
•	
your TV.
Adjust the picture size options on your external device or TV to full screen.
•	
The remote control does not work. Replace the remote control batteries with the poles (+/–) in the right direction.
•	
Clean the sensor’s transmission window on the remote.
•	
Try pointing the remote directly at the TV from 5~6 feet away.
•	
The cable/set top box remote control 
does not turn the TV on or off, or adjust 
the volume. Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user 
•	
manual for the SAMSUNG TV code.
A “Mode Not Supported” message 
appears. Check the supported resolution of the TV, and adjust the external device’s output resolution 
•	
accordingly. Refer to the resolution settings on page 20 of this manual.
There is a plastic smell from the TV. This smell is normal and will dissipate over time.
•	
The TV Signal Information is unavailable 
in the Self Diagnosis Test menu. This function is only available with digital channels from an Antenna / RF/Coax connection. (P. 20)
•	
The TV is tilted to the side. Remove the base stand from the TV and reassemble it.
•	
[LC550-XH]BN68-02688P.indb   452010-10-27   �� 12:33:04 
						

							46English
Other Information
IssuesSolutions and Explanations
There are difficulties assembling the stand 
base.Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please 
•	
use a magnetized screw driver.
The channel menu is greyed out. 
(unavailable) The 
•	 Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or 
every time the TV is turned off. If the TV is in the 
•	 Store Demo mode, it will reset audio and picture settings every 30 minutes. Change 
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. 
Press the SOURCE button to select TV mode, and go to MENU  → Setup  → Plug & Play (Initial 
setup) →  ENTER
E.
You have intermittent loss of audio or 
video. Check the cable connections and reconnect them. 
•	
Loss of audio or video can be caused by using overly rigid or thick cabl\
es. Make sure the cables are 
•	
flexible enough for long term use. If mounting the TV to the wall, we \
recommend using cables with 90 
degree connectors.
You see small particles when you look 
closely at the edge of the frame of the TV. This is part of the product’s design and is not a defect.
•	
The PIP menu is not available. PIP
•	  functionality is only available when you are using a HDMI, PC or components source.
The message “Scramble signal” or “Weak 
Signal/No Signal” appears. If you are using a CAM CARD (CI/CI+), check that it is installed into the commo\
n interface slot.
•	
If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again\
.
•	
You turned the TV off 45 minutes ago, and 
it turned on again. It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware 
•	
downloaded whilst your watching TV.
There are recurrent picture/sound issues. Check and change the signal/source.
•	
A reaction may occur between the rubber 
cushion pads on the base stand and the 
top finish of some furniture. To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
•	
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,  ✎there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the 
product.
[LC550-XH]BN68-02688P.indb   462010-10-27   �� 12:33:05 
						

							47English
05
Other Information
Storage and Maintenance ¦
Do not spray water or a cleaning agent directly onto the
product. Any liquid that goes into the product may cause a
failure, fire, or electric shock.Clean the product with a soft cloth dapped in a small 
amount of water.
Licence ¦
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and t\
he Symbol are 
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. 
Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that 
plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-
Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. \
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
Pat. 7,295,673; 7,460,688; 7,519,274
TheaterSound, SRS and the  symbol are trademarks of SRS Labs, Inc.  
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
Open source licence notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
[LC550-XH]BN68-02688P.indb   472010-10-27   �� 12:33:05 
						

							48English
Other Information
Specifications
Display resolution1920 x 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity 10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing -20°C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing
TV System  Analogue : Depending on your country selection
Digital : DVB-T/DVB-C
Colour/video system Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, [email protected], [email protected]
Sound System BG. OK NICAM. MPEGl
HDMI IN 1 ~ 4 Video : 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio : Two Channel Linear PCM 32/44.1/48 kHz, 16/20/24bits Analogue audio input (HDMI IN1 only) PC Input
Stand Swivel
(Left / Right) -20˚ ~ 20˚
Model Name  LE32C550LE37C550LE40C550LE46C550
Screen Size 
(Diagonal) 32 inch37 inch40 inch46 inch
Sound
Output 10W X 2
Dimensions (WxDxH)
Body
With stand
793.7 X 78 X 494.3 mm
793.7 X 239 X 557.5 mm 911.6 X 78.2 X 559.4 mm
911.6 X 255 X 622.8 mm 980.2 X 80.3 X 597 mm
980.2 X 255 X 660.9 mm1112.5 X 80.3 X 672.5 mm 1112.5 X 275 X 736 mm
Weight
Body
With Stand 8.8 Kg
11.5 Kg 11.5 Kg 
14.9 Kg14.8 Kg 
18.2 Kg17.9 Kg 
21.7 Kg
Design and specifications are subject to change without prior notice. ✎
For the power supply and power consumption, refer to the label attached to the product. ✎
[LC550-XH]BN68-02688P.indb   482010-10-27   �� 12:33:06 
						

							49English
05
Other Information
Index
A
AllShare 38
Amplify 16
Antenna 11
Anynet+ 35
AUDIO OUT  8
Auto Adjustment 15
Auto Volume 17
B
Background Music 34
Balance L/R 16
Basic View 33
Batteries  5
Black Tone 14
Blanking Bracket 41
Brightness 13
C
Cable Tie 4, 43
Change PIN  18
Channel Manager 11
Clock 18
Colour Tone 14
Component  7
Connecting to a PC 22
Connecting to an Audio Device  8
D
DIGITAL AUDIO OUT 8, 35
DivX® VOD  34
D-sub 22
Dynamic 13
Dynamic Contrast 14
E
Eco Sensor 14
Edit Name  9
Editing Channels 12
Energy Saving 13
Equalizer 16
External Speaker 17
EPG 10
F
Favourites Channel 11
Film Mode 15
Fine Tune 13
Flesh Tone 14
Frequency 12
H
HDMI 7, 35
Headphones  8
Home Theatre 8, 35
I
Installation Space  2
L
Language 19
Licence 47
Lock 18
M
Media Play 28
Melody 19
Menu Transparency 19
Music 32
N
Navigate  9
Network Connection 23
Network Setup 24, 26
Now & Next guide  10
O
ON/OFF button 5
Optimal resolution 22
P
Password 27
Photos 32
Picture Size 15, 34
PIP (Picture in Picture)  20
Plug & Play  6
Power Indicator 5
R
Receiver 37
Recording 36
Remote Control  5
Repeat Mode 34
RGB Only Mode 14
Rotate 34
S
Select All 13
Self Diagnosis 20
Sharpness 13
Signal Information 20
Sleep Timer 18
Slide Show 32
Software Upgrade 20
Source List  9
Speaker Select 17
Specifications 48
Standby mode  4
Subtitle 19
Symbol  3
T
Timer 18
Title 33, 34
Tools  3
Troubleshooting 44
TV Speaker 17
U
USB Drive 20
Using Channel View 10
Using Scheduled View 10
Using the Favourite Channels 11
V
VCR  7
Video Formats 31
Videos 30
Volume 4, 5
W
Wall Mount  41
Warm 14
White Balance 14
[LC550-XH]BN68-02688P.indb   492010-10-27   �� 12:33:06 
						

							This page is intention-
ally left blank.
[LC550-XH]BN68-02688P.indb   502010-10-27   �� 12:33:06