Samsung LE 32C550 User Manual

							31English
04
Advanced Features
Supported Video Formats y
File ExtentionContainerVideo Codec ResolutionFrame rate 
(fps) Bit rate 
(Mbps) Audio Codec
*.avi
*.mkv AVI
 
MKV Divx 3.11 / 4.x / 5.1 / 6.0
1920x10806 ~ 308
MP3 / AC3 / LPCM / ADPCM / DTS Core
XviD
1920x10806 ~ 308
H.264 BP / MP / HP 1920x10806 ~ 3025
MPEG4 SP / ASP 1920x10806 ~ 308
*.asf ASF Divx 4.x / 5.1 / 6.0
1920x10806 ~ 308
MP3 / AC3 / LPCM / 
ADPCM / WMA
XviD
1920x10806 ~ 308
MPEG4 SP / ASP 1920x10806 ~ 308
*.wmv ASFWindow Media Video v9 1920x10806 ~ 3025 WMA
*.mp4 MP4 H.264 BP / MP / HP
1920x10806 ~ 3025
 MP3 / ADPCM / AAC
MPEG4 SP / ASP 1920x10806 ~ 308
XVID 1920x10806 ~ 308
*.3gp 3GPP H.264 BP / MP / HP
1920x10806 ~ 3025
ADPCM / AAC / HE-AAC
MPEG4 SP / ASP 1920x10806 ~ 308
*.vro VRO 
VOB MPEG1 
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM
MPEG2 1920x108024 / 25 / 30 30
*.mpg
*.mpeg PS MPEG1
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM / AAC
MPEG2 1920x108024 / 25 / 30 30
*.ts
*.tp
*.trp TS MPEG2
1920x108024 / 25 / 30 30
AC3 / AAC / MP3 / DD+ / 
HE-AAC
H.264
1920x10806 ~ 3025
VC1 1920x10806 ~ 3025
Other Restrictions
NOTE
 ✎
If there are problems with the contents of a codec, the codec will not be supported. x
If the information for a Container is incorrect and the file is in error, the Container will not be able to play  xcorrectly.
Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Fram/sec 
 xlisted in the table above.
Video DecoderAudio Decoder
Supports up to H.264, Level 4.1
•	
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not 
•	
supported.
H.263 is not supported.
•	
GMC 2 over is not support. 
•	 Supports up to WMA 7, 8, 9, STD
•	
WMA 9 PRO does not support 2 channel excess multi channel or 
•	
lossless audio.
WMA sampling rate 22050Hz mono is not supported.
•	
[LC550-XH]BN68-02688P.indb   312010-10-27   �� 12:32:55 
						

							32English
Advanced Features
Playing movie file continuously (Resume Play)
If you exit the playing Videos function, it can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing 
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
3. Select Play Continuously (Resume Play) by pressing the Blue 
button. The Movie will begin to play from where it was stopped.The Blue button is available when resuming play.
 ✎
If the  ✎Cont. movie play help  function is set to On in the 
Settings  menu, a pop-up message will appear when you 
resume play a movie file.
Music
Playing a Music
1. Press the ◄ or ► button to select Music, then press the ENTERE 
button in the Media Play menu.
2.  Press the ◄/►/▲/▼  button to select the desired file in the file list.
3. Press the ENTERE button or � (Play) button.
During music playback, you can search using 
 – ◄ and ► button.
� 
 – (REW) and µ buttons do not function during play.
Only displays the files with MP3 and PCM file extension. Other file 
 ✎extensions are not displayed, even if they are saved on the same 
USB device.
If the sound is abnormal when playing MP3 files, adjust the 
 ✎Equalizer  in the Sound  menu. (An over-modulated MP3 file may 
cause a sound problem.) 
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the 
ENTERE button in the Media Play menu.
2.  Press the ◄/►/▲/▼  button to select the desired photo in the file list.
3. Press the ENTERE button or � (Play) button.
While a photo list is displayed, press the 
 –� (Play) / ENTERE 
button on the remote control to start slide show.
All files in the file list section will be displayed in the slide sh\
ow.
 –
During the slide show, files are displayed in order from currently 
 –being shown.
Music files can be automatically played during the Slide Show if the 
 ✎Background Music  is set to On.
The BGM Mode cannot be changed until the BGM has finished 
 ✎loading.
Movie 01.avi 00:04:03 / 00:07:38
1/1
SUM Play continuously  E Pause  L Jump  T Tools  R Return
resumes playing from the last viewed scene.
 Play continuously
Image1024.jpg          1024x768  2010/2/1  3/15
SUME Pause   L Previous/Next   T Tools   R return
Normal
3/15I Love you
Jhon
Music 1No SingerMusic 2No SingerMusic 3No SingerMusic 4No SingerMusic 5No Singer
I Love You
Jhon
1st Album
Pop
2010
4.2MB
01:10 / 04:02
SUME Pause   L jump   T Tools   R return
Playlist
[LC550-XH]BN68-02688P.indb   322010-10-27   �� 12:32:58 
						

							33English
04
Advanced Features
Playing the multiple files  ¦
Playing the selected video / music / photo files
1. Press the Yellow button in the file list to select the desired file.
2.  Repeat the above operation to select multiple files.NOTE
 ✎
The ( xc) mark appears to the left of the selected files.
To cancel a selection, press the yellow button again. 
 x
To deselect all selected files, press the  xTOOLS  button and 
select  Deselect All .
3.  Press the TOOLS button and select Play Selected Contents.
Playing the video / music / photo file group
1.  While a file list is displayed, move to the any file in desired group.
2.  Press the TOOLS button and select Play Current Group.
Media Play Additional Function ¦
Sorting the file list
Press the blue button in the file list to sort the files.
CategoryOperations VideosMusicPhotos
Basic ViewIt shows whole folder. You can view the photo by selecting the folder.✓ ✓ ✓
TitleIt sorts and displays the file title in Symbol/Number/Alphabet/Special\
 order.✓✓ ✓
PreferenceIt sorts and displays the file by preference. You can change the file preference in 
the file list section using the green button✓✓ ✓
Latest DateIt sorts and shows files by latest date.✓ ✓
Earliest DateIt sorts and shows files by earliest date.✓✓
ArtistIt sorts the music file by artist in alphabetical✓
AlbumIt sorts the music file by album in alphabetical order.✓
GenreIt sorts music files by the genre.✓
MoodIt sorts music files by the mood. You can change the music mood information.✓
MonthlyIt sorts and shows photo files by month. It sorts only by month (from January to 
December) regardless of year.✓
1/1/Movie 01.avi
SUM
Movie 01.avi Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010 Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Change Device Select     Sorting  T Tools
Videos
2 files selected
Page
[LC550-XH]BN68-02688P.indb   332010-10-27   �� 12:32:59 
						

							34English
Advanced Features
Videos / Music / Photos Play Option menu
During playing a file, press the TOOLS button.
 Option menuOperationsVideosMusicPhotos
Title You can move the other file directly.
✓
Repeat Mode You can play movie and music files repeatedly.
✓✓
Picture Size (Mode1 / 
Mode2 / Original) You can adjust the picture size for preference.
✓
Picture Setting You can adjust the picture setting. (P. 13, 14, 15, 16)
✓✓
Sound Setting You can adjust the sound setting. (P. 16, 17)
✓✓✓
Subtitle Setting
You can play the video file with Subtitle. This function only works if \
the subtitles are the same file name as the video file. ✓
AudioYou can enjoy video in one of supported language as required. 
The function is only enabled when steam-type files which support 
multiple audio formats are played. ✓
Stop Slide Show /  
Start Slide Show You can start or stop a Slide Show.
✓
Slide Show Speed You can select the slide show speed during the slide show.
✓
Background Music You can set and select background music when watching a Slide 
Show.
✓
Zoom You can zoom into images in full screen mode.
✓
Rotate You can rotate images in full screen mode.
✓
Information You can see detailed information about the played file.
✓✓✓
Settings
Using the Setup Menu
Cont. movie play help (resume play) (On / Off)
 ■ : Select to display the help pop-up message for continuous movie 
playback.
Get the DivX® VOD registration code
 ■ : Shows the registration code authorized for the TV. If you connect to the DivX web 
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD 
registration using Media Play, the registration is completed.
For more information on DivX® VOD, visit www.DivX.com.
 ✎
Get the DivX® VOD deactivation code ■ : When DivX® VOD is not registered, the registration deactivation code is 
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
Information
 ■ : Select to view information about the connected device.
[LC550-XH]BN68-02688P.indb   342010-10-27   �� 12:32:59 
						

							35English
04
Advanced Features
Anynet+ 
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s 
remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung 
device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using 
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an 
HDMI cable.
NOTE
 ✎ 
Connect the Optical cable between the 
 xDIGITAL AUDIO OUT (OPTICAL) jack on your T V and the Digital Audio Input 
on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound 
 xfrom the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, 
connect the  DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the 
Amplifier or Home Theatre, not the T V.
Connect only one Home Theatre.
 x
You can connect an Anynet x+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
Anynet
 x+ works when the AV device supporting Anynet+ is in the standby or on status.
Anynet
 x+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet
+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that 
support the recording function.)
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of 
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the 
play menu of the DVD recorder will appear.
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is 
connected, it will be represented as (*device_name).
Anynet+ Device 1
HDMI Cable
HDMI Cable
TV
Optical CableHome Theatre
Anynet+ Device 2, 3, 4
[LC550-XH]BN68-02688P.indb   352010-10-27   �� 12:32:59           
						

							36English
Advanced Features
Setting Up Anynet ¦+ 
Setup ■Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the 
 ✎Anynet+ (HDMI-CEC)  function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
If 
 ✎Auto Turn Off is set to Ye s , running external devices will turn off at the same time as the T V powers off. 
However, a device may not turn off if recording is in progress.
May not be enabled depending on the device.
 ✎
Switching between Anynet ¦+ Devices 
1. Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the red button to refresh the list.
 ✎
2. Select a device and press the ENTERE button. You can switch to the selected device.
Only when you set 
 ✎Anynet+ (HDMI-CEC)  to On in the Application  menu, the Device List  menu appears.
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching 
 xoperation.
If you have selected external input mode by pressing the 
 xSOURCE  button, you cannot use the Anynet+ function. 
Make sure to switch to an Anynet+ device by using the  Device List.
Recording  ¦
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
When there are more than two recording devices
 ✎
When multiple recording devices are connected, the recording devices are listed. Select one recording device in  xthe Device List .
When the recording device is not displayed, select 
 ✎Device List  and press the Red button to search devices.
2. Press the EXIT button to exit.
You can record the source streams by selecting 
 ✎Recording : (device_name).
Pressing the 
 ✎� (REC) button will record whatever you are currently watching. If you are watching video from 
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly 
 ✎connect an antenna to a recording device, refer to the recording device’s users manual.
[LC550-XH]BN68-02688P.indb   362010-10-27   �� 12:32:59 
						

							37English
04
Advanced Features
Listening through a Receiver  ¦
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.If your receiver supports audio only, it may not appear in the device list.
 ✎
The receiver will work when you have properly connected the optical in jack of the receiver to the  ✎DIGITAL AUDIO 
OUT (OPTICAL)  jack of the T V.
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the T V’s Optical jack. When the 
 ✎T V is displaying a DT V (aerial) signal, the T V will send out 5.1 channel sound to the receiver. When the source is a 
digital component such as a DVD and is connected to the T V via HDMI, only 2 channel sound will be heard from 
the receiver.
NOTE
 ✎
You can only control Anynet x+ devices using the T V remote control, not the buttons on the T V.
The T V remote control may not work under certain conditions. If this occurs, reselect the Anynet
 x+ device.
The Anynet
 x+ functions do not operate with other manufacturers’ products.
Troubleshooting for Anynet ¦+
ProblemPossible Solution
Anynet+ does not work. Check if the device is an Anynet
•	+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theatre).
•	
Check if the Anynet
•	
+ device power cord is properly connected.
Check the Anynet
•	+ device’s Video/Audio/HDMI Cable connections.
Check whether Anynet
•	+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
•	
Check whether it is Anynet
•	
+ exclusive remote control.
Anynet
•	+ does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial 
setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off 
•	
and on again.
Check if the Anynet
•	
+ Function of Anynet+ device is set on.
I want to start Anynet+. Check if the Anynet
•	+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set \
to On 
in the Anynet+ Setup menu.
Press the 
•	 TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+. Select 
•	 View TV in the Anynet+ menu.
Press the 
•	 SOURCE button on the TV remote control and select a device other than Anynet+ devices.
Press 
•	 P >/
						

							38English
Advanced Features
AllShare
About AllShare ¦
AllShare connects your TV and compatible Samsung mobile 
phones / devices through a network. On your TV, you can 
view call arrivals, SMS messages and schedules set on your 
mobile phones. In addition, you can play media contents 
including videos, photos and music saved on your mobile 
phones or the other devices (such as your PC) by controlling 
them on the TV via the network. Additionally, you can use 
your TV for browsing web pages in your mobile phones.For more information, visit “www.samsung.com” or 
 ✎contact the Samsung call center. Mobile devices may 
need additional software installation. For details, refer to 
each user’s guide.
Using excessive long L AN cable may cause abnormal 
 ✎operation.
Setting Up the AllShare ¦
Setup
Message (On / Off) ■ : Enables or disables the message 
function (for call arrivals SMS messages and schedules 
set on your mobile phones).
Media (On / Off)
 ■ : Enables or disables the media 
function. When the media function is on, it plays videos, 
photos and music from a mobile phone or other device 
that supports ScreenShare.
ScreenShare (On / Off)
 ■ : Enables or disables 
ScreenShare accesses various contents from mobile 
phones or other ScreenShare supporting devices.
TV name
 ■ : Sets the TV name so you can find it easily on 
a mobile device.
If you select 
 ✎User Input , you can type on the T V 
using the OSK (On Screen Keyboard).
Message / Media / ScreenShare
Shows a list of mobile phones or connected devices which 
have been set up with this TV for using the Message, 
Media, or ScreenShare function.
The 
 ✎Media  function is available in all mobile devices 
which support AllShare.
Allowed / Denied
 ■ : Allows/Blocks the mobile phone.
Delete
 ■ : Deletes the mobile phone from the list.
This function only deletes the name of the mobile 
 ✎from the list. If the deleted mobile device is turned 
on or trieds to connect to the T V, it may appear on 
the list again.
Using the Message Function
Using this function, you view call arrivals, SMS messages 
and schedules set on the mobile phone through the alarm 
window while watching TV. NOTE
 ✎
To disable the alarm window, set  xMessage  to Off in 
Setup  of AllShare.
If 
 xOK  is selected, or if  OK is not selected after the 
message has appeared three times, the message 
will be deleted. The message is not deleted from the 
mobile phone.
The alarm window can be displayed while using 
 xsome applications such as  Media Play etc. To view 
the contents of a message, switch to T V viewing 
mode.
When a message from an unknown mobile phone is 
 xdisplayed, select the mobile phone on the message 
menu in AllShare and select Denied  to block the 
phone.
Message View
If a new SMS message arrives while you are watching 
TV, the alarm window appears. If you click the OK 
button, the contents of the message are displayed.  You can configure the viewing settings for SMS 
 ✎messages on your mobile phones. For the 
procedures, refer to the mobile phone manual.
Some types of characters may be displayed as 
 ✎blank or broken characters.
AllShare3/7
E Select    R return    e Exit' Setup    R return
Setup
Messange
Media
ScreenShareMessange  : OnMedia : OnScreenShare : OnTV name : Home TV
Setup
[LC550-XH]BN68-02688P.indb   382010-10-27   �� 12:33:00 
						

							39English
04
Advanced Features
Call Arrival Alarm
If a call arrives while you are watching TV, the alarm 
window appears.
Schedule Alarm
While you are watching TV, the alarm window appears to 
display the registered event.You can configure viewing settings for schedule 
 ✎contents on your mobile phones. For the 
procedures, refer to the mobile phone manual.
Some special characters may be displayed as 
 ✎blank or broken characters.
Using the Media Function 
An alarm window appears informing the user that the media 
contents (videos, photos, music) sent from a mobile phone 
will be displayed on your TV. The contents are played 
automatically 3 seconds after the alarm window appears. 
If you press the RETURN or EXIT button when the alarm 
window appears, the media contents are not played. NOTE
 ✎
If the media function executes for the first time, the  xwarning popup window appears. Press Allow button, 
then you can use Media function on that device.
To turn off the media contents transmission from 
 xthe mobile phone, set  Media to Off in the AllShare 
setup. 
Contents may not be played on your T V depending 
 xon their resolution and format.
The 
 xENTERE and ◄ / ► buttons may not work 
depending on the type of media content.
Using the mobile device, you can control the media 
 xplaying. For details, refer to each mobile’s user’s 
guide.
When you want to play media contents from 
 xyour PC, select the PC icon on the main display 
of AllShare. Then the T V’s  Media Play menu 
automatically changes. For more detail information, 
refer to “Media Play”.
Using ScreenShare Function
Using ScreenShare, you can browse various web contents 
provided by the mobile phone. For example, the image 
below displays an access page for contents on a mobile. 
You can read the mobile’s files and view the phone book and 
calendar on the TV. Also, in the phone book, you can make a 
call to another person, or send to SMS.
NOTE
 ✎
You must have ScreenShare installed on your  xSamsung Mobile phone / device to use this feature.
Doc Viewer
 x can read files in doc format, but cannot 
modify them.
The screen display may differ depending on the 
 xconnected device.
My Mobile
Contacts CalendarDoc viewer
E Select     return    
Using your Samsung Phone to Operate Your TV
Before you can use this feature, you must connect to 
a Samsung mobile phone that supports ScreenShare 
functions. When operating the TV with your mobile phone, 
only the POWER, y, z and MUTE buttons 
are supported.
Even if you keep pressing down on a control button 
 ✎(channel or volume) on the mobile phone the value will 
only go up or down by one unit.
"Unknown Device 0" is requesting that the media file be allowed to play.
If you wish to allow the media file to be played at your device, pleas\
e press 
"Allow", otherwise press "Deny".
You can also change the setting (or resetting) of this feature at "AllShare 
Setup".
Warning: Please note that if your device is connected to unsecured or 
unfamiliar network, unwanted or inappropriate contents might be played. 
If you are not sure about the network's identity or content's 
appropriateness, we strongly recommend that you do not "Allow" the 
request to play.
AllowDeny
[LC550-XH]BN68-02688P.indb   392010-10-27   �� 12:33:01 
						

							40English
Other Information
ABCD
P.MODES.MODE
SUBT.
SOURCE 0
MEDIA.PGUIDE
CH LIST
DUALI-II
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some p\
ages may not be displayed.
You can change Teletext pages by pressing the numeric buttons on the remote control.
 ✎
Other Information
The Teletext pages are organized according to six categories:
PartContents PartContents
A Selected page number. DDate and time.
B Broadcasting channel identity. EText.
C Current page number or 
search indications. FStatus information. FASTEXT 
information.
1
3
4 5
2
7
8
9
0
!
@
6
1/ (Teletext on/mix/off): 
Activate the Teletext mode after 
selecting the channel providing the 
Teletext service. Press it twice to 
overlap the Teletext mode with the 
current broadcasting screen. Press 
it one more time to exit teletext.
2
8 (store): Store the Teletext 
pages. 
3
4 (size): Display the double-
size letters on the upper half of the 
screen. For the lower half of the 
screen, press it again. To display 
the normal screen, press it once 
again. 
4
9 (hold): Hold the display 
on a given page if the selected 
page is linked with several 
secondary pages which follow on 
automatically. To resume, press it 
again
5
0 (mode): Select the Teletext 
mode (LIST/ FLOF). 
If you press this button in the LIST 
mode, the mode is switched into 
the List save mode. In the List save 
mode, you can save a Teletext 
page into list using the 8(store) 
button.
6
1 (sub-page): Display the 
available sub-page.
2 (page up): Display the next  Teletext page. 7
3 (page down): Display the 
previous Teletext page. 8
6 (index): Display the index 
(contents) page at any time while  you are viewing Teletext. 9
5 (reveal): Display the hidden 
text (answers to quiz games, for  example). To display the normal  screen, press it again.  0
7 (cancel): Display the current 
broadcast when searching for a  page.!
Colour buttons (red/green/
yellow/blue): If the FASTEXT 
system is used by a broadcasting  company, the different topics 
covered on a Teletext page are 
colour-coded and can be selected  by pressing the coloured buttons. Press one of them corresponding  to the required. The page is 
displayed with other coloured 
information that can be selected  in the same way. To display the 
previous or next page, press the  corresponding coloured button. @
[LC550-XH]BN68-02688P.indb   402010-10-27   �� 12:33:01