Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 887 Station 17 Auto Select Any Idle Appearance BCC Appears when ISDN-PRI or ISDN-BRI Trunks is enabled on the System-Parameters Customer-Options screen. Display-only field set to 0 for stations (that is, indicates voice or voice-grade data). Refer to ‘‘ Generalized route selection’’ on page 1340 for a detailed description of Bearer Capability Classes (BCC) and their ability to provide specialized routing for various types of voice and data calls. The BCC value is used to determine compatibility when non-ISDN facilities are connected to ISDN facilities (ISDN Interworking). Bridged Call Alerting If Bridged Call Alerting is n and Per Button Ring Control is n, audible ringing is suppressed for incoming calls on bridged appearances of another phone’s primary extension. Building Enter a valid building location. See ‘‘ Site Data’’ on page 882 for valid entries. Valid entries Usage all Enter all to allow all calls (ACD and non-ACD) terminated to an idle station to be cut through immediately. acdEnter acd to allow only ACD split /skill calls and direct agent calls to auto answer. If this field is acd, Non-ACD calls terminated to a station ring audibly. none Enter none to cause all calls terminated to this station to receive an audible ringing treatment. Valid entries Usage y/n Enter y to allow automatic selection of any idle appearance for transferred or conferenced calls. The system first attempts to find an idle appearance of the call being transferred or conferenced. If that attempt fails, the system selects the first idle appearance. Valid entries Usage y/n Enter y to enable audible ringing for TEG, PCOL, bridged appearances, or Data Extension calls.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 888 Station 17 Button Assignments Enter the abbreviated software name to assign a feature button. For a list of feature buttons, refer to ‘‘ Telephone feature buttons’’ on page 58. NOTE: If you want to use Terminal Translation Initialization (TTI), you must assign a call appearance (call-appr) to the first button position. TTI needs the button on the first call appearance to get dial tone. Cable You can use this field to identify the cable that connects the phone jack to the system. You also can enter this information in the Blank column on the Port Assignment Record. Caller ID Message Waiting Indication Appears when the Type field is CallrID. For CallrID type phones or analog phones with Caller ID adjuncts only. NOTE: The Caller ID Message Waiting Indication administration is independent of the administration of LED or NEON lamp DEFINITY ECS Message Waiting Indication (MWI). For example, it is possible to administer a Caller ID phone with the Caller ID Message Waiting Indication field set to n and the Message Waiting Indicator field set to neon. Call Waiting Indication This allows user, attendant-originated, and outside calls to busy single-line phone to wait and sends a distinctive call-waiting tone to the single-line user. This feature is denied if Data Restriction is y or Switchhook Flash is n, or if Data Privacy is active via the phone COS assignment. Valid entries Usage y/n Enter y to allow aliasing of various non-Lucent phones and adjuncts. Valid entries Usage y/n Enter y to activate Call Waiting Termination for the phone.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 889 Station 17 CDR Privacy This option allows digits in the called number field of an outgoing call record to be blanked, on a per-station basis. You administer the number of blocked digits system-wide in the Privacy - Digits to Hide field on the CDR System Parameters screen. COR Enter a Class of Restriction (COR) number to select the desired restriction. Cord Length Enter a number to specify the length (in feet) of the cord attached to the receiver. COS Enter the desired Class of Service (COS) number to select allowed features. Country Protocol Enter the protocol that corresponds to your supported initialization and codesets. The Country Protocol must match any previously-administered endpoint on the same port. Valid entries Usage y/n Enter y to enable Call Privacy for each station. Valid entries Usage 1 United States (Bellcore National ISDN) 2Australia etsiETSI (Europe) 3Japan 6Singapore
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 890 Station 17 Coverage After Forwarding This field governs whether an unanswered forwarded call is provided coverage treatment. Coverage Msg Retrieval Applies if the phone is enabled for LWC Reception. Coverage Module Coverage Path 1 or Coverage Path 2 Enter a coverage-path number or time-of-day table number from a previously-administered Call Coverage Path screen or Time of Day Coverage Table screen. NOTE: If Modified Misoperation is active (Misoperation Alerting is y on the Feature-Related System Parameters screen), you must assign a Coverage Path to all stations on the switch. Valid entries Usage y Coverage treatment is provided after forwarding regardless of the value of the Coverage After Forwarding field on the System Parameters - Call Coverage/Call Forwarding screen. nNo coverage treatment is provided after forwarding regardless of the value of the Coverage After Forwarding field on the System Parameters - Call Coverage/Call Forwarding screen. s(ystem) Indicates that call processing uses the Coverage After Forwarding field on the ‘‘ System Parameters Call Coverage / Call Forwarding’’ screen. To override the system-wide parameter for a given station, set this field to y or n. Valid entries Usage y/n Enter y to allow users in the phone’s Coverage Path to retrieve Leave Word Calling (LWC) messages for this phone. Valid entries Usage y Enter y to indicate that a coverage module is connected to the station. Once you enter y, the system displays an additional page that allows you to assign the buttons for the module.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 891 Station 17 CRV Length Only for ASAI stations. Enter 1 or 2 to indicate the length of CRV for each interface. Data Extension Enter the extension assigned to the data module. Data Module Data Restriction Data restriction provides permanent protection and cannot be changed by the phone user. Do not assign a Data Restriction if Auto Answer is all or acd. Default Dialing Abbreviated Dialing Dial Code Appears only when the Special Dialing Option is set to default. Enter a list number associated with the abbreviated dialing list. When the user goes off-hook for a data call and presses RETURN following the DIAL prompt, the system dials the AD number. The data call originator also can perform data-terminal dialing by specifying a dial string that may or may not contain alphanumeric names. Display Caller ID Appears when the Type field is CallrID. For CallrID type phones or analog phones with Caller ID adjuncts only. Valid entries Usage y/n Enter y to indicate that you want to administer a data module with this phone. Entering y displays the Data Module screen. Valid entries Usage y/n Enter y to prevent tones, such as call-waiting tones, from interrupting data calls. Valid entries Usage y/n Enter y to allow transmission of calling party information to the Caller ID phone or adjunct.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 892 Station 17 Display Cartridge For 7404 D phones only. Enter y to indicate there is a display cartridge associated with the station. This displays an additional page to allow you to assign display buttons for the display cartridge. Display Client Redirection Only administrable if Hospitality is enabled on the System-Parameters Customer-Options screen. This field affects the phone display on calls that originated from a station with Client Room Class of Service. NOTE: For stations with an audix station type, AUDIX Voice Power ports, or ports for any other type of messaging that needs display information, Display Client Redirection must be set to y. Display Language Specifies the display language. Valid entries Usage y When set to y, the redirection information for a call originating from a Client Room and terminating to this station displays. n When set to n, this station’s display does not show the redirection information for all calls originating from a Client Room (even redirected calls) that terminate to this station. Only the client name and extension (or room, depending on what is administered on the ‘‘ Hospitality’’ screen) display. Valid entries Usage english Enter the language you want users to see on their displays. french italian spanish user-defined
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 893 Station 17 Distinctive Audible Alert Endpt ID Appears only if Endpt Init is y. Enter a unique 2-digit number (00–62) for this endpoint. Each Endpt ID field must have a unique value for each endpoint on the same port. This field provides for multipoint configuration conformance to the Bellcore Terminal Initialization procedures. In these procedures, a multipoint configuration requires the last 2 digits of the Service Profile Identifier (SPID) be between 00 and 63 and be binary unique for each endpoint. This field, combined with the SPID, gives the effective SPID administered into the terminal. Bellcore ISDN-1 requires the SPID programmed into the endpoint contain at least 9 digits. For example, if the SPID is 1234, and Endpt ID is 01, then the SPID administered on the terminal is 000123401. The three leading zeros are necessary to create a 9-digit SPID. Endpt Init Endpoint initialization is a procedure, required for multipoint operation, by which User Service Order Profile (USOP) is associated with an endpoint on the ISDN-BRI. This association is made via the SPID, administered into the system, and entered into the ISDN-BRI terminal. For an ISDN-BRI terminal to be operational in a multipoint configuration, both the administered SPID and the SPID programmed into the ISDN-BRI terminal must be the same. Therefore, the SPID of new or reused terminals must be programmed to match the administered SPID value. Appears only if MIM Support is y and indicates the terminal’s endpoint initialization capability. Valid entries Usage y/n Enter y so the phone can receive the 3 different types of ringing patterns which identify the type of incoming calls. Distinctive ringing may not work properly for off-premises telephones. Valid entries Usage y Enter y if the terminal supports Bellcore ISDN-1 terminal initialization procedures. nEnter n for all other country protocols.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 894 Station 17 Event Minimization Allows you to minimize events sent on a link. This field appears only if you set Type to asai. Expansion Module Extension Displays the extension for this station—this is either the extension you specified in the station command or the next available extension (if you used add station next). Feature Module Enter y to indicate the station is connected to a feature module. Entering y displays an additional page to allow you to assign feature buttons to the module. Fixed TEI This field appears only for ISDN-BRI data modules and ASAI links. It indicates that the endpoint has a fixed Terminal Endpoint Identifier (TEI). The TEI identifies a unique access point within a service. You must administer TEIs for fixed TEI terminals. However, for terminals with the automatic TEI capability, the system dynamically assigns the TEI. Valid entries Usage y/n Enter y when an application or library does not want to receive identical event reports over different associations. When minimization is enabled, the switch sends a single event report on only one association and discards any remaining reports. It is up to the library or application to report this event to other interested parties or applications. Valid entries Usage y/n Enter y if this phone has an expansion module. This will enable you to administer the buttons for the expansion module. Valid entries Usage y/n Entering y displays the TEI field. For ASAI, enter y.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 895 Station 17 Floor Enter a valid floor location. See ‘‘ Translation-ID Number Mismatch Interval (days)’’ on page 881 for valid entries. H.320 Conversion Allows H.320 compliant calls made to this phone to be converted to voice-only. Because the system can only handle a limited number of conversion calls, you may need to limit the number of telephones with H.320 conversion. Headset Enter y if the telephone has a headset. HOT LINE DESTINATION — Abbreviated Dialing Dial Code Appears only when Special Dialing Option is hot-line. Use Hot Line Service when very fast service is required and when you use a telephone only for accessing a certain facility. Hot Line Service allows single-line telephone users, by simply lifting the handset, to automatically place a call to a preassigned destination (extension, telephone number, or feature access code). The Hot Line Service destination number is stored in an Abbreviated Dialing List. When the user goes off-hook on a Data Hot Line call, the system dials the AD number. A Direct Department Calling (DDC), a Uniform Call Distribution (UCD), a Terminating Extension Group (TEG) extension, or any individual extension within a group can be a Hot Line Service destination. Also, any extension within a DDC group, UDC group, or TEG can have Hot Line Service assigned. Loudspeaker Paging Access can be used with Hot Line Service to provide automatic access to paging equipment. HOT LINE DESTINATION — Abbreviated Dialing List Number Enter the abbreviated dialing list where you stored the hotline destination number. HOT LINE DESTINATION — Dial Code Enter the dial code in the specified abbreviated dialing list where you stored the hotline destination number.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 896 Station 17 Hunt-to Station Enter the extension the system should hunt to for this phone when the phone is busy. This field allows you to create a station hunting chain (by assigning a hunt-to station to a series of phones). Idle Appearance Preference Indicate which call appearance is selected when the user lifts the handset and there is an incoming call. Ignore Rotary Digits If this field is y, the short switch hook flash (50 -150) from a 2500-type set is ignored. IP SoftPhone Appears only for DCP station types. Valid entries Usage y If you enter y, the user connects to an idle call appearance instead of the ringing call. n If you enter n, the Alerting Appearance Preference is set and the user connects to the ringing call appearance. Valid entries Usage y Enter y to indicate that rotary digits from the set should be ignored. n Enter n to make sure they are not ignored. Valid entries Usage y/n Enter y indicate that this extension is either a PC-based multifunction station or part of a telecommuter complex with a call-back audio connection. The type of IP softphone depends on the value of the Media Complex Ext field.