Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 777 ISDN-BRI Trunk Circuit Pack 17 CPN Prefix Use this field to specify the number that is added to the beginning of the extension to form a Calling or Connected Number. Total CPN Len ISDN-BRI Trunk Circuit Pack This screen administers an ISDN-BRI circuit pack. See DEFINITY ECS System Description for information on the maximum number of ISDN-BRI circuit packs that you can administer. Valid entries Usage 1 to 15 digits Only digits are allowed in the CPN Prefix column. Leading spaces, or spaces in between the digits, are not allowed. nIf the length of the CPN Prefix matches the Total CPN Length, the extension number is not used to formulate the CPN number. nIf the number of digits in the CPN Prefix plus the extension length exceeds the administered Total CPN Length, excess leading digits of the extension are deleted when formulating the CPN number. nIf the number of CPN Prefix digits plus the extension length is less than the Total CPN Length, the entry is not allowed. nIf the Total CPN Length is 0, no calling party number information is provided to the called party and no connected party number information is provided to the calling party. blank If this field is blank, the extension is sent unchanged. This is useful in countries where the public network is able to insert the appropriate CPN Prefix to form an external DID number. Valid entries Usage 0 to 15Enter the total number of digits to send.
DEFINITY ECS Release 8.2
Administrator’s Guide 555-233-506 Issue 1
April 2000
Screen reference
778 ISDN-BRI Trunk Circuit Pack
17
Screen 124. BRI Trunk (using a TN2185 circuit pack)
Location
This is a display-only field. It shows the TN2185 circuit pack location (PPCSS)
Name
Interface Companding
DCP/Analog Bearer Capability
Valid entries Usage
1–15
alpha-numeric
characters This name is used to identify the circuit pack.
Valid entries Usage
a-law
Indicates the companding algorithm expected by the system at
the far end.
mu-law
Valid entries Usage
3.1kHz Indicates how to encode the Bearer Capability IE for an
outgoing call originated by a DCP or analog endpoint.
speech
change bri-trunk-board Page 1 of 1
ISDN-BRI TRUNK CIRCUIT PACK
Location: 01A09 Name: ______________
Interface Companding: a-law_ DCP/Analog Bearer Capability: 3.1kHz
T3 Timer Length (sec): 15_
Port Interface Side Cntry/Peer TEI Time Invert Synch Layer 1 Detect
Protocol Fill Bits? Source? Stable? Slips?
1: user_______ 12__ 0__ flags n n n n
2: network____ etsi 0__ ones_ y y y y
3: user_______ 2___ auto flags y n y n
4: peer-slave_ b QSIG 0__ flags n y y n
5: peer-master a QSIG auto ones_ n n n n
6: ___________ ____ 0__ ones_ n n y n
7. ___________ ____ 0__ ones_ n n y n
8: ___________ ____ 0__ ones_ n n y n
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 779 ISDN-BRI Trunk Circuit Pack 17 T3 Timer Length (sec) Port This is a display-only field. It shows the port number to which parameters administered on the row apply. Interface Side Cntry/Peer Protocol Tells call processing software which ISDN protocol standard is applied. Valid entries Usage 1 to 127 Tells the TE side how long to wait, in seconds, for an inactive Layer 1 to become active. Valid entries Usage network Tells call processing software whether a particular port is connected to a user/network or a peer interface. These entries are valid for the TN2185. You can enter peer-slave only if the QSIG Basic Call Setup feature is enableduser peer-master peer-slave Valid entries Usage a Determines how glare conditions are handled when Interface field is peer-slave.b Valid entries Usage 1 to 25When this field is 10, 12, 13, or etsi, the Protocol Version field is equivalent to b on the DS1 circuit pack screen. When the Cntry/Peer Protocol field is set 10, 12, 13, or etsi, set the Provol Version field to b. For all other administered values, the Protocol Version sets to a. etsi QSIG When the Interface field is peer-slave or peer-master, this field must be QSIG. The choice QSIG is valid only when the Interface field is peer-slave. blank You cannot leave this field blank if the Interface field is set to a valid, non-blank value
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 780 ISDN-BRI Trunk Circuit Pack 17 TEI Time Fill The bit pattern sent on the D-channel between valid LAPD packets. Invert Bits Synch Source Layer 1 Stable Detect Slips Valid entries Usage auto 0 Valid entries Usage flags ones Valid entries Usage y/n Valid entries Usage y n Valid entries Usage y Tells call processing and maintenance software whether to expect the network to drop Layer 1 when the BRI port is idle. Only the TN2185 may be set to n.n Valid entries Usage y/n Tells maintenance software whether slips reported by the BRI port should be logged.
DEFINITY ECS Release 8.2
Administrator’s Guide 555-233-506 Issue 1
April 2000
Screen reference
781 ISDN-BRI Trunk Circuit Pack
17
Field descriptions for page 1
Screen 125. BRI Trunk (with a TN556B or TN2198 circuit pack)
The following field descriptions are unique to the ISDN-BRI Circuit Pack screen
with a TN556B or TN2198 circuit pack. The following fields do not display with a
TN556B or TN2198 circuit pack:
nT3 Timer Length (sec)
nSynch Source
nLayer 1 Stable
nDetect Slips
Interface
Valid entries Usage
network
Tells call processing software whether a particular port is
connected to a user/network or a peer interface. These entries
are valid for the TN556B. You can enter
peer-master only if
the QSIG Basic Call Setup feature is enabledpeer-master
change bri-trunk-board Page 1 of 1
ISDN-BRI TRUNK CIRCUIT PACK
Location: 01A09 Name: ______________
Interface Companding: a-law_ DCP/Analog Bearer Capability: 3.1kHz
Port Interface Side Cntry/Peer TEI Time Invert
Protocol Fill Bits?
1: network__ 12__ 0__ flags n
2: network__ etsi 0__ ones_ y
3: network__ 2___ auto flags y
4: peer-master b QSIG 0__ flags n
5: peer-master a QSIG auto ones_ n
6: __________ ____ 0__ ones_ n
7. __________ ____ 0__ ones_ n
8: __________ ____ 0__ ones_ n
9: __________ ____ 0__ ones_ n
10: __________ ____ 0__ ones_ n
11: __________ ____ 0__ ones_ n
12: __________ ____ 0__ ones_ n
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 782 ISDN-BRI Trunk Circuit Pack 17 Side Cntry/Peer Protocol Tells call processing software which ISDN protocol standard is applied. Field descriptions for page 2 NOTE: If administering a TN2185 circuit pack, 8 ports appear; otherwise, 12 ports appear. Valid entries Usage a Determines how glare conditions are handled when Interface field is peer-slave. This field is not administrable when the Interface field is network.b Valid entries Usage 1 to 25When this field is 10, 12, or 13, the Protocol Version field is equivalent to b on the DS1 circuit pack screen. etsiWhen this field is etsi, the Protocol Version field is equivalent to b on the DS1 circuit pack screen. QSIGWhen the Interface field is peer-master, this field must be QSIG. blank You cannot leave this field blank if the Interface field is set to a valid, non-blank value.
DEFINITY ECS Release 8.2
Administrator’s Guide 555-233-506 Issue 1
April 2000
Screen reference
783 ISDN-BRI Trunk Circuit Pack
17
Screen 126. BRI Trunk - Page 2 (using a TN2185 circuit pack)
Screen 127. BRI Trunk - Page 2 (using a TN2198/TN556B circuit pack)
NOTE:
You cannot change the Endpt Init, SPID, or Endpt ID port parameters
unless that port is busied out or unadministered. It is possible to
change all other fields on this page even if the corresponding port is
active.
change bri-trunk-board Page 2 of 2
ISDN-BRI TRUNK CIRCUIT PACK
Port Interwork XID Endpt SPID Endpt SPID Endpt Max
Message Test? Init? ID ID NCA TSC
1: PROGress y n ____________ __ ____________ __ 0___
2: ALERTing y y 908957200000 __ ____________ __ 0___
3: PROGress y y 0001________ __ ____________ __ 0___
4: PROGress n n ____________ __ ____________ __ 0___
5: PROGress n y 625761449___ 01 ____________ __ 0___
6: PROGress n n ____________ __ ____________ __ 0___
7. PROGress n n ____________ __ ____________ __ 0___
8: PROGress n n ____________ __ ____________ __ 0___
Port Directory Directory Port Directory Directory
Number Number Number Number
1: 5:
2: 6:
3: 7:
4: 8:
change bri-trunk-board Page 2 of 2
ISDN-BRI TRUNK CIRCUIT PACK
Port Interwork XID Endpt SPID Endpt Max
Message Test? Init? ID NCA TSC
1: PROGress n y ____________ __ 0___
2: ALERTing n y ____________ __ 0___
3: PROGress n y ____________ __ 0___
4: PROGress n y ____________ __ 0___
5: PROGress n y ____________ __ 0___
6: PROGress n y ____________ __ 0___
7. PROGress n y ____________ __ 0___
8: PROGress n y ____________ __ 0___
9: PROGress n y ____________ __ 0___
10: PROGress n y ____________ __ 0___
11: PROGress n y ____________ __ 0___
12: PROGress n y ____________ __ 0___
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 784 ISDN-BRI Trunk Circuit Pack 17 NOTE: If the Interface field on page 1 contains a valid value when the screen is submitted, the contents of the fields on page 2 for that port are validated. If the Interface field is blank when the screen is submitted, the fields on this page for that port reset to their default values. Port This is a display-only field. It shows the port number to which parameters administered on the row apply. Interworking Message This field determines what message the switch sends when an incoming ISDN trunk call interworks (is routed over a non-ISDN trunk group). XID Test Endpt Init Indicates whether the far end supports endpoint initialization. DEFINITY ECS blocks you from changing this field unless the port is busied out or unadministered. Valid entries Usage PROGress Normally select this value. PROGress asks the public network to cut through the B-channel and let the caller hear tones such as ringback or busy tone provided over the non-ISDN trunk. ALERTingALERTing causes the public network in many countries to play ringback tone to the caller. Select this value only if the DS1 is connected to the public network, and it is determined that callers hear silence (rather than ringback or busy tone) when a call incoming over the DS1 interworks to a non-ISDN trunk. Valid entries Usage y/n Indicates whether the far end supports the Layer 2 XID test. Valid entries Usage y If set to y, the SPID field must not be blank. DEFINITY ECS blocks you from changing this field and the SPID field unless that port is busied out or unadministered. nIf set to n, the SPID and Endpt ID fields must be blank.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 785 ISDN-BRI Trunk Circuit Pack 17 SPID A 12-digit field containing the SPID expected by the far end. DEFINITY ECS blocks you from changing this field unless the port is busied out or unadministered. The only protocol supported for SPID initialization is Bellcore (Country Code 1). Trunks will not be put in service if SPID installation is not successful. Endpt ID A 2-digit field containing the Endpoint Identifier expected by the far end. DEFINITY ECS blocks you from changing this field unless the port is busied out or unadministered. Max NCA TSC Port This is a display-only field. It shows the port number to which parameters administered on the row apply. Directory Number These 10-digit fields contain the directory numbers assigned to the interface, which it views as being allocated to 2 separate endpoints. Valid entries Usage Any string of 1 to 12 digits Leading zeroes considered significant and not ignored Valid entries Usage 00 to 62Leading zeroes considered significant and not ignored. Valid entries Usage 0 through 63. This 2-digit field gives the maximum number of Non-Call-Associated Temporary Signaling Connections allowed on this BRI D-channel. This field’s function is the same as the field with the same name on the Signaling Group screen. Valid entries Usage Any string of 1 to 10 digitsThese fields must be administered in pairs. That is, if you enter a value in one field, you must enter a value in the other.
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Screen reference 786 Language Translations 17 Trunk Member Administration Administer BRI trunk members using the following scheme to address the individual B-channels: nB-channel 1 uses the port address of the BRI Trunk Port. nB-channel 2 uses the port address of B-channel 1 incremented by 16. When adding a BRI trunk to an ISDN trunk-group, DEFINITY ECS blocks you from administering a Signaling Group for that trunk member. DEFINITY ECS blocks you from administering a BRI trunk member if the port has not yet been administered on the BRI Trunk screen. For example, administer the B-channels on a TN2185 circuit pack inserted in slot 01A10 as follows: Interactions The add bri-trunk board PPCSS command is rejected if PPCSS identifies a TN556B circuit pack, and a port on that circuit pack has already been assigned to a station or data-module. If a TN556B circuit pack has been administered as a BRI trunk circuit pack, any port on that circuit pack is prevented from being assigned to a station or data-module. Language Translations When you want to use a language other than English, French, Italian, and Spanish to display messages on your display phones, use the Language Translation screens to define the messages. Set up your messages using Roman letters, punctuation, digits and blank spaces. Diacritical marks are not supported. Port B-channel 1 B-channel 2 1 01A1001 01A1017 2 01A1002 01A1018 3 01A1003 01A1019 4 01A1004 01A1020 5 01A1005 01A1021 6 01A1006 01A1022 7 01A1007 01A1023 8 01A1008 01A1024