Panasonic Kx-Td816e, Kx-td1232e User Manual

							Station Programming2-17
2.2Station Programming
Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible (CO or DSS) button as a DSS button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button which you wish
to assign as a DSS button.
2.Dial 1.
•The display shows:
3.Dial the extension number.
•The display shows:
(— xxxx:extension number)
•To erase an incorrect entry,press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER  button becomes the CLEAR button when using the
overlay.)
4.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
Conditions
•DSS buttons are provided on the DSS Console with a default setting.  You can change
the setting from a paired telephone.
•You cannotenter non-existent extension numbers.
1
2
4
AUTO DIAL
STORE
EXT–
CLR
EXT–xxxx
CLR
3
extension number
1 
						

							2-18Station Programming
2.2Station Programming
FWD/DND Button (Assignment)
Allows you to assign a Flexible (CO,DSS,PF) button as the FWD/DND button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS,PF) button which you
wish to assign as the FWD/DND button.
2.Dial 4.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
Group-CO (G-CO) Button (Assignment)
Allows you to assign a Flexible (CO) button as a Group-CO button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the Flexible(CO) button which you wish to assign as a
G-CO button.
2.Dial #.
•The display shows:
3.Enter the CO line group number (1 through 8).
•To erase an incorrect entry,press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
1
2
3
AUTO DIAL
STORE
1
2
4
AUTO DIAL
STORE
3
CO line group number
FWD/DND
TRK GRP–
CLR
4 
						

							Station Programming2-19
2.2Station Programming
†:Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System. (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
Hurry-Up Button (Assignment)
Allows you to assign a Flexible (CO) button as the Hurry-Up button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the Flexible(CO) button which you wish to assign as the
Hurry-Up button.
2.Dial 81.
•The display shows:
3.Enter the extension number (2 digits through 4 digits).
 If you enter the extension number 223,the
display shows:
4.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
Conditions
•You cannot enter a non-existent extension numbers.
•Hurry-Up button can be used only by the operator.
Live Call Screening (LCS) Button (Assignment) †
Allows you to assign a Flexible (CO,DSS) button as a Live Call Screening button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button which you wish
to assign as a Live Call Screening button.
2.Dial 85.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
1
2
Hurry up to-
CLR
Hurry up to-223
CLR
18
4AUTO DIAL
STORE
3
extension number
LCS
1
2
3
AUTO DIAL
STORE
85 
						

							2-20Station Programming
2.2Station Programming
†:Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System. (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
Live Call Screening (LCS) Cancel Button (Assignment) †
Allows you to assign a Flexible (CO,DSS) button as a Live Call Screening Cancel
button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button which you wish
to assign as a Live Call Screening Cancel button.
2.Dial 86.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
Log-In / Log-Out Button (Assignment)
Allows you to assign a Flexible (CO) button as the Log-In / Log-Out button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the Flexible(CO) button which you wish to assign as the
Log-In / Log-Out button.
2.Dial 80.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
1
2
3
AUTO DIAL
STORE
86
LCS Cancel
1
2
3
AUTO DIAL
STORE
80
Login/Logout 
						

							Station Programming2-21
2.2Station Programming
1
2
3
AUTO DIAL
STORE
3
Message Waiting
Loop-CO (L-CO) Button (Assignment)
Allows you to assign a Flexible (CO) button as a Loop-CO button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the Flexible(CO) button which you wish to assign
as the L-CO button.
2.Dial .
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
Message Waiting (MESSAGE) Button (Assignment)
Allows you to assign a Flexible (CO,DSS) button as the Message Waiting (MESSAGE)
button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button which you wish
to assign as the Message Waiting button.
2.Dial 3.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
1
2
3
AUTO DIAL
STORE
Loop-CO 
						

							2-22Station Programming
2.2Station Programming
Night Button (Assignment)
Allows you to assign a Flexible (CO,DSS) button as a Night button.
Pressing the Night button allows you to switch between the day mode and night mode.
The button indicator turns on when the night mode is assigned and turns off when the
day mode is assigned.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button you wish to
assign as the Night button.
2.Dial 8.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit the Station Programming mode:Press [PROGRAM] or lift the handset.
Condition
•“Class of Service”programming determines the extensions that can perform this
feature.
Programming References
•System Programming — Installation Manual
[513]Night Service Access
[601]Class of Service
1
2
3
AUTO DIAL
STORE
Night8 
						

							Station Programming2-23
2.2Station Programming
One-Touch Dialling Button (Assignment)
Allows you to assign a Flexible (CO,DSS,PF) button as an One-Touch Dialling button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS,PF) button which you
wish to assign as an One-Touch Dialling button.
2.Dial 2.
•The display shows:
3.Enter the desired number(an extension number or a phone
number,etc.).
•Up to 16 digits can be stored.
•To erase an incorrect entry,press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
Conditions
•The number can be an extension number,a telephone number,or a feature number.
Up to sixteen digits can be stored on an One-Touch Dialling button.
•To store the telephone number of an outside party,the line access code (9,or 81
through 88) must be stored as the leading digit.
•You can store a number consisting of seventeen digits or more by dividing it and
assigning it in two One-Touch Dialling buttons.  In this case,the line access code
should not be stored on the second button.
•You can use 0 through 9,,#,PAUSE,RECALL or FLASH/RCL,CONF and
INTERCOM for storing:
#:change the dialling mode (Pulse to Tone)
RECALL or FLASH/RCL :Register Recall Signal
PAUSE:pause
CONF:— (hyphen)
INTERCOM :for secret dialling
1
2
4
AUTO DIAL
STORE
3
desired number
2
CLR 
						

							2-24Station Programming
2.2Station Programming
One-Touch Dialling with Auto Hold Button (Assignment)
Allows you to assign a Flexible (CO,DSS,PF) button as an One-Touch Dialling with
Auto Hold button.
During a conversation,the call is put on hold and transferred to the assigned number.
You can make a call to the assigned number by pressing this button as well as pressing
the One-Touch dialling button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS,PF) button you wish to
assign as an One-Touch Dialling with Auto Hold button.
2.Dial 8#.
3.Dial the desired number.
•Up to 16 digits can be stored.
•To erase an incorrect entry,press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit the Station Programming mode:Press [PROGRAM] or lift the handset.
1
2
8
3
Dial the desired number
4AUTO DIAL
STORE 
						

							Station Programming2-25
2.2Station Programming
Phantom Extension Button (Assignment)
Allows you to assign a Flexible (CO,DSS) button as the Phantom Extension button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS) button which you wish
to assign as the Phantom Extension button.
2.Dial 88.
•The display shows:
3.Dial the phantom extension number.
•The display shows:
(— xxxx:phantom extension
number)
•To erase an incorrect entry,press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button while in the
programming mode.)
4.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit the Station Programming mode:Press [PROGRAM] or lift the handset.
Conditions
•The phantom extension number must be assigned in program [130] “Phantom
Extension Number Assignment”before assigning the Phantom Extension button.
•A DSS button can be assigned as the Phantom Extension button so that the operator
can use it for transferring a call.
•If you assigned the Phantom Extension button to one of the CO buttons (13 through 24)
on your KX-T7230 telephone and change the telephone to a KX-T7235 model,you must
re-program the setting as the KX-T7235 telephone has only 12 CO buttons.  If you do
not change the setting,the phantom extension call reaches the INTERCOM button.
Programming References
•System Programming — Installation Manual
[130]Phantom Extension Number Assignment
1
2
4
AUTO DIAL
STORE
3
Phantom extension number
88EXT-
CLR
EXT-xxxx
CLR 
						

							2-26Station Programming
2.2Station Programming
SAVE Button (Assignment)
Allows you to assign a Flexible (CO,DSS,PF) button as the SAVE button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired Flexible(CO,DSS,PF) button which you
wish to assign as the SAVE button.
2.Dial 5.
•The display shows:
3.Press the STOREbutton.
•The STORE indicator light turns on.
•The display shows the initial programming mode.
—To exit from Station Programming mode:Press [PROGRAM] or lift the handset.
1
2
3
AUTO DIAL
STORE
5
Save