Panasonic Kx-Td816e, Kx-td1232e User Manual

							7-24SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Calling / Connected Line Identification Presentation
(CLIP / COLP)
Allows you to show the calling party’s number on the display of the called party’s
telephone when making a call (CLIP),or allows you to show the called party’s number
on the display of the calling party’s telephone when answering a call (COLP).  
Condition
•The number sent to the other party is assigned by system programming.
Programming References
•System Programming — Installation Manual
[622]  CLIP / COLP Number Assignment
Feature References
Calling Line Identification Restriction (CLIR)
Connected Line Identification Restriction (COLR) 
						

							SLT and ISDN Telephone Features7-25
7.2SLT and ISDN Telephone FeaturesC
Calling Line Identification Restriction (CLIR)
Allows you to restrict the presentation of your number to the called party when you make
a call.  You can set the called party to see your number on the display once or in
continuously.  This feature is an ISDN service.
To restrict / allow the presentation of your number to the called party
1.Lift the handset.
2.Dial the feature number(59).
3.Dial 2or 0.
- 2 :to restrict
- 0 :to allow
•You hear a confirmation tone and then a dial tone.
4.Hang up.
To change the current setting at just time you make a call
1.Lift the handset.
2.Dial the feature number(59) and 1.
3.Dial the line access code(9 or 81 through 88).
4.Dial the phone number.
Programming References
•System Programming — Installation Manual
[419]Subscriber Number Assignment
[516]Calling Line Identification Restriction
1
2
3
line access code
1
2
4
3
or
4
phone number 
						

							7-26SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Call Park
Allows you to place a held call into a system parking area.  You are released from the
parked call to perform other operations.  The parked call can be retrieved by any
extension user.
While having a conversation;
1.Press the RegisterRecallbutton.
•You hear a confirmation tone and then a dial tone.
2.Dial the feature number(52).
3.Dial a parking zone number(0 through 9).
•You hear a confirmation tone and then a dial tone when the
call is parked.
•If you hear a busy tone,that indicates the specified parking
zone is unavailable.
•It is not necessary to redial the feature number to change
the parking zone.  Just enter the parking zone number while
hearing a busy tone.
Retrieving a parked call
1.Lift the handset.
2.Dial the feature number(52).
3.Dial the parking zone number(0 through 9) at which the call
is parked.
•You hear a confirmation tone (optional) and then you can
talk to the party.
•You hear a reorder tone if there is no held call.
Conditions
•Up to ten calls can be parked.
1
2
3
parking zone number
R
1
2
3
parking zone number 
						

							SLT and ISDN Telephone Features7-27
7.2SLT and ISDN Telephone FeaturesC
•If a parked call is not retrieved within Transfer Recall time,“Call Park Recall”
occurs.  If a parked call is an outside call,it is possible to select whether the “Call
Park Recall”will go to the initiating extension or to the operator through System
Programming.  If a parked call is an intercom call,the “Call Park Recall”will return
to the initiating extension.
•If a “Call Park Recall”is not retrieved within fifteen minutes,it is automatically
disconnected.
•A confirmation tone is audible when the parked call is retrieved.  Eliminating the tone
is programmable.
Programming References
•System Programming — Installation Manual
[201]Transfer Recall Time
[990]System Additional Information,Fields,(11),(16)
Call Pickup,CO Line
Allows you to answer an incoming outside call that is ringing at another extension.
1.Lift the handset.
2.Dial the feature number(4).
•You hear a confirmation tone (optional).
•You can talk to the caller.
Conditions
•It is not possible to answer Call Waiting calls.
•A confirmation tone is audible when the call is picked up.  Eliminating the tone is
programmable.
Programming References
•System Programming — Installation Manual
[990]System Additional Information,Field (16)
Feature References
Call Pickup Deny
Call Waiting
1
2 
						

							7-28SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Call Pickup,Directed
Allows you to answer an incoming call ringing at any other extension.
1.Lift the handset.
2.Dial the feature number(41).
3.Dial the extension numberat which a call is ringing.
•You hear a confirmation tone (optional).
•You can talk to the caller.
Conditions
•Doorphone calls can be picked up from extensions that are not programmed to answer
doorphone calls.
•A confirmation tone is audible when the call is picked up.  Eliminating the tone is
programmable.
Programming References
•System Programming — Installation Manual
[990]System Additional Information,Field (16)
Feature References
Call Pickup Deny
1
2
3
extension number 
						

							SLT and ISDN Telephone Features7-29
7.2SLT and ISDN Telephone FeaturesC
1
2
Call Pickup,Group
Allows you to answer a call that is ringing at another telephone within your extension
group.
1.Lift the handset.
2.Dial the feature number(40).
•You hear a confirmation tone (optional).
•You can talk to the caller.
Conditions
•You can pick up an incoming outside,intercom or doorphone call.
•It is not possible to answer Call Waiting calls.
•A confirmation tone is audible when the call is picked up.  Eliminating the tone is
programmable.
Programming References
•System Programming — Installation Manual
[602]Extension Group Assignment
[990]System Additional Information,Field (16)
Feature References
Call Pickup Deny
Call Waiting
Extension Group (®see Installation Manual) 
						

							7-30SLT and ISDN Telephone Features
C7.2 SLT and ISDN Telephone Features
Call Pickup Deny
Allows you to prevent another extension from picking up your calls with the “Call
Pickup” feature.
Setting / Cancelling
1. Lift the handset.
2. Dial the feature number(720).
3. Dial 1or 0.
- 1 : to set
- 0 : to cancel
• You hear a confirmation tone and then a dial tone.
4.Hang up.
Feature References
Call Pickup, Directed
Call Pickup, Group
Call Pickup, Outside Line
1
2
4
3
or 
						

							SLT and ISDN Telephone Features7-31
7.2SLT and ISDN Telephone FeaturesC
Call Splitting
Allows you to have two callers on a line and alternate between them.  If a call comes in
while you are already on the line,you can place the current call on hold and have a
conversation with the other party.
Having a conversation while having another call on hold temporarily (Consultation Hold*)
1.Press the RegisterRecallbutton.
•The first held call is released.
•Pressing this switch alternates between the callers.
Conditions
•This feature does not work during doorphone call or paging.
Feature References
Call Hold
Consultation Hold* (
®see Installation Manual)
* Consultation Hold makes a call placed on hold temporarily to transfer it or make a Conference call or Call
Splitting.
1
R 
						

							7-32SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Call Transfer — to CO Line
Allows you to transfer an intercom call to a CO line by a Screened Call Transfer.
Screened Call Transfer
While having a conversation;
1.Press the RegisterRecallbutton.
•The other party is placed on hold.
•You hear a confirmation tone and then a dial tone.
2.Dial the line access code(9 or 81 through 88).
3.Dial the phone numberwhere calls will be transferred.
4.Waitfor an answer and announce.
5.Hang up.
•The call is transferred.
Conditions
•If you want to return to the held call,press the Register Recall button before the
destination party answers.
•“Class of Service”programming determines the extensions that can perform this
feature.
Programming References
•System Programming — Installation Manual
[503]Call Transfer to CO Line
[601]Class of Service
[990]System Additional Information,Field (1)
1
2
3
line access code
R
4
phone number
5 
						

							SLT and ISDN Telephone Features7-33
7.2SLT and ISDN Telephone FeaturesC
Call Transfer — to Extension
Allows you to perform a Screened or Unscreened Call Transfer to another extension.
Screened Call Transfer
While having a conversation;
1.Press the Register Recallbutton.
•The other party is placed on hold.
•You hear a confirmation tone and then a dial tone.
2.Dial the extension numberwhere the call will be transferred.
•You hear a ringback tone.
3.Wait for the answer and announce.
4.Hang up.
•The call is transferred.
Unscreened Call Transfer
While having a conversation;
1.Press the RegisterRecallbutton.
•The other party is placed on hold.
•You hear a confirmation tone and then a dial tone.
2.Dial the extension numberwhere the call will be transferred.
•You hear a ringback tone.
•Ringing starts at the destination extension.
3.Hang up.
1
2
3
extension number
R
4
1
2
3
extension number
R