Panasonic Kx-Td816e, Kx-td1232e User Manual

							Contents
Display Examples ..........................................................................
9-2
Feature Number List .....................................................................9-9
Tone List ......................................................................................9-12
Troubleshooting...........................................................................9-14
Section 9
Appendix 
						

							9-2Appendix
9Appendix
DISPLAYEXAMPLEDESCRIPTION
Display Examples
Set Time & Date
1 Jan  12:00AM
1 Jan  1994 SAT
123:
123:Tony Viola
234:Busy
456:DND
567:Free
345:MDM Access
3434:Primary
4545:Secondary
1234567890
Panasonic
950-1001PP12345&
®123:Tony Viola
®CO 02 
®234:Busy
®456:DND
Account
Alarm  10:15AM
Alarm  10:15AM*
Alarm Cancelled
Alarm Not Stored
Factory setting (blinking).
— Shown on the manager’s display only.
The current date and time are not set (default).
The current date and time are not set (default).
— Pressing “”while on-hook alternates between this display and the previous
display.
Make or receive an intercom call,name is not assigned.
Make or receive an intercom call;  name is assigned.
Confirm key programming on the DSS or MESSAGE button.
Destination extension is busy.
Destination extension is set to “Do Not Disturb (DND).”
Called by “Camp-On”(intercom recall).
Destination is modem for remote access.
“Class of Service (COS) Switch”is set to primary status.
“Class of Service (COS) Switch”is set to secondary status.
Called by the ISDN line with the CLIP feature* (phone number).
* CLIP:Provides you with a caller’s information,such as his/her name and telephone number,on
the CO line assigned to receive ISDN service calls.  For more details,please consult with
your dealer.
Called by the ISDN line,with CLIP feature* (name).
Confirm key programming on the REDIAL,SAVE,or One-Touch Dialling button.
Make or receive an intercom call after the call is transferred; name is assigned.
Called by a CO line after a call is transferred.
Destination extension is busy after the call is transferred.
Destination extension is set to “Do Not Disturb (DND)”after the call is transferred.
Confirm key programming on the Account button.
Complete to set or called by “Timed Reminder”(one-time mode).
Confirm “Timed Reminder”programming.
Complete to set or called by “Timed Reminder”(everyday mode). 
Confirm “Timed Reminder”programming.
Cancel “Timed Reminder.”
Confirm “Timed Reminder”programming when it is not stored. 
						

							Appendix9-3
9Appendix
DISPLAYEXAMPLEDESCRIPTION
All Call Page
At Ext 123
Back at   11:00
BGM On
BGM Off
Busy
C.Pickup Allow
C.Pickup Deny
Call Parked at 1
Call Waiting Off
Call Waiting On
Callback Ext1234
Callback CO 01
Callback TRG 1
Callback CO *
CFB:1234567890&
CFB Cancel
CFNR:1234567890&
CFNR Cancel
CFU:1234567890&
CFU Cancel
CLIR Off
CLIR On
CO 01
CO 01   0:01’15
CO01:£00001.15
CO01:00005
CO02:AB COMPANYAccess to “Paging — All.”
Absent Message 3.
Absent Message 4.
Start BGM.
Stop BGM.
Resource is busy.
Cancel “Call Pickup Deny.”
Complete to set “Call Pickup Deny.”
Complete to set “Call Park.”
Cancel “Call Waiting.”
Complete to set “Call Waiting.”
Complete to set “Camp-On.”
Complete to set “Camp-On.”
Complete to set “Camp-On.”
Complete to set “Camp-On”when there is no idle CO line.
Complete to set “Call Forwarding — to ISDN Line”(- CFB).
Cancel “Call Forwarding — to ISDN Line”(- CFB).
Complete to set “Call Forwarding — to ISDN Line”(- CFNR).
Cancel “Call Forwarding — to ISDN Line”(- CFNR).
Complete to set “Call Forwarding — to ISDN Line”(- CFU).
Cancel “Call Forwarding — to ISDN Line”(- CFU).
Cancel “Calling Line Identification Restriction (CLIR).”
Complete to set “Calling Line Identification Restriction (CLIR).”
Idle CO line is captured.
Called by a CO line.
Duration time of incoming outside call.
CO line charge in Pounds.
CO line meter.
— Pressing the corresponding CO button alternates between this display and the
previous display.
Received an outside call on the ISDN line with the CLIP feature *; the CO line
number and the CO line name are assigned. 
						

							9-4Appendix
9Appendix
DISPLAYEXAMPLEDESCRIPTION
CO03: Free
Conference
CO in Use
CO Not Assigned
COLR Off
COLR On
CONT RNGOFF BGM
Contrast:3
Day Mode
DND   Ext201
DND-DDI Set
DND-DDI Cancel
Do Not Disturb
Door 1 Open
Doorphone 1
E123 & CO 01
E123 & E234
Enter ACCNT Code
Ext Data Clear
External BGM Off
External BGM On
Extrnl Page All
Extrnl Page 1
FWD(ALL)Ext123
FWD(B/NA)Ext100
FWD(BSY)Ext234Called by “Camp-On”(CO line recall).
Confirm key programming on the Conference button.
The selected CO line is busy.
The desired CO line is restricted (not assigned).
Cancel “Connected Line Identification Restriction (COLR).”
Complete to set “Connected Line Identification Restriction (COLR).”
Ringer Volume is off.
Display Contrast — Adjustment.
Day mode status. (Cancel Night mode.)
— “Night Service”
Complete to set “Do Not Disturb (DND).”
Complete to set “Do Not Disturb for Direct Dialling In Call.”
Cancel “Do Not Disturb for Direct Dialling In Call.”
Confirm key programming on the FWD/DND button.
Complete to open the door. 
Make or receive a doorphone call.
Conference with an extension and CO line.
Conference with two extensions.
Pressing Account Button.
— “Account Code Entry”
Execute “Station Feature Clear.”
Stop BGM through external pager.
— “Background Music (BGM) — External”
Start BGM through external pager.
— “Background Music (BGM) — External”
Access to “Paging — External”(- to all external pagers).
Access to “Paging — External”(- to a specific external pagers).
Complete to set “Call Forwarding — All Calls.”
Confirm key programming on the FWD/DND button.
Complete to set “Call Forwarding — Busy/No Answer.”
Confirm key programming on the FWD/DND button.
Complete to set “Call Forwarding — Busy.”
Confirm key programming on the FWD/DND button. 
						

							Appendix9-5
9Appendix
DISPLAYEXAMPLEDESCRIPTION
FWD(CO)91201431
FWD(From)Ext123
FWD(NA)Ext345
FWD Cancel E 123
FWD/DND Cancel
Gone Home
Group Page 1
Group Page All
Handset:3
Headset:3
In a Meeting
Incoming Log Off
Incoming Log On
LCS
LCS Cancel
Locked No. :123
Log-in
Log-out
Message Cancel
MW at Ext 1234
MW Not Accepted
MW Cancel:E1234
MW Cancelled
Night Mode
No Held Call
No Incoming Call
Not ValidComplete to set “Call Forwarding — to CO Line.”
Confirm key programming on the FWD/DND button.
Complete to set “Call Forwarding — Follow Me.”
Complete to set “Call Forwarding — No Answer.”
Confirm key programming on the FWD/DND button.
Cancel “Call Forwarding — Follow Me (All Calls)”at another extension.
Cancel “Call Forwarding”or “Do Not Disturb (DND).”
Absent Message 2.
Access to “Paging — Group”(- to a particular extension group).
Access to “Paging — Group”(- to all extensions).
Volume Control — handset on handset mode.
Volume Control — headset on headset mode.
Absent Message 6.
Complete to set “CO Incoming Call Information Log Mode.”
Cancel “CO Incoming Call Information Log Mode.”
Complete to set “Live Call Screening (LCS).”
Cancel “Live Call Screening (LCS).”
Complete to set “CO Incoming Call Information Log Lock.”
Complete to set “Electronic Station Lockout.”
Log-In mode status.
— “Log-In / Log-Out”
Log-Out mode status.
— “Log-In / Log-Out”
Cancel Absent Message.
Complete to set “Message Waiting.”
Not complete to set “Message Waiting.”
Cancel “Message Waiting”of desired extension.
Cancel one’s own “Message Waiting.”
Night mode status. (Cancel Day mode.)
— “Night Service”
There is no held call when retrieving call on hold or parked call.
There is no incoming call when trying to pick up the call.
Illegal operation. 
						

							9-6Appendix
9Appendix
DISPLAYEXAMPLEDESCRIPTION
Out Until 12/12
Paging Deny Off
Paging Deny On
Parallel Off
Parallel On
Park at 0 N/A
PT-PGM Mode
Password:123
Password Cancel
RCL:Tony Viola
RCL: Ext 1234
Restricted
Ringer:3
SP:12
SWR Data Dump
SWR Data Clear
Transfer to CO
Unlocked
Will Return SoonAbsent Message 5.
Cancel “Paging — DENY.”
Complete to set “Paging — DENY.”
Cancel “Paralleled Telephone Connection.”
Complete to set “Paralleled Telephone Connection.”
Not complete to set “Call Park.”
Entered the Station Programming mode.
Complete to set the LCS password.
— “Live Call Screening (LCS)”
Cancel the LCS password.
— “Live Call Screening (LCS)”
Called by transfer recall,with name. — “Call Transfer”
Called by transfer recall,without name.
— “Call Transfer”
An outgoing call is restricted.
Volume Control — ringer on idle status.
Volume Control — speaker on handsfree mode.
“System Working Report”is printed out.
“System Working Report”is cleared.
The destination extension is set “Call Forwarding — to CO Line.”
Cancel “CO Incoming Call Information Log Lock.”
Cancel “Electronic Station Lockout.”
Absent Message 1. 
						

							Appendix9-7
9Appendix
DISPLAYEXAMPLEDESCRIPTION
Account
ACSM:00450
ACSM:£00099.99
Alert
C.W. Tone1
Charge Meter
Clear Ready?
CO-01
Conference
COSM:00450
COSM:£00099.99
EXSM:00450
EXSM:£00099.99
EXT140:Lock
EXT140:Unlock
EXT*:****
Ext-123
FWD/DND
Hands-free:Off
Hands-free:On
Handset
Headset
Hurry up to-223
Jack04EXT104
LCS
LCS Cancel
Login/Logout
Loop-COAccount button is assigned.
Total account code meter is assigned.
Total account code in Pounds is assigned.
Alert button is assigned.
Select Call Waiting tone.
Select charge meter.
Available to clear Station Programming data.
Single-CO (S-CO) button is assigned.
Conference (CONF) button is assigned.
Total CO line meter is assigned.
Total CO line charge in Pounds is assigned.
Total extension meter is assigned.
Total extension charge in Pounds is assigned.
Complete to lock the other extension.
— “Remote Station Lock Control.”
An extension is not locked.
The display of an extension is not locked.
All extensions are not locked.
The display of all extensions are not locked.
DSS or Phantom Extension button is assigned.
FWD/DND button is assigned.
Disable “Full One-Touch Dialling”mode.
Enable “Full One-Touch Dialling”mode.
Select Handset mode.
Select Headset mode.
Hurry-Up button is assigned.
Confirm jack number and extension number.
Live Call Screening (LCS) button is assigned.
Live Call Screening (LCS) Cancel button is assigned.
Log-In / Log-Out buttons assigned.
Loop-CO (L-CO) button is assigned.
Examples — in Station Programming mode 
						

							9-8Appendix
9Appendix
DISPLAYEXAMPLEDESCRIPTION
Message Waiting
Night
Not Stored
12:Not Stored
Pref.In:CO-02
Pref.In:NO
Pref.In:Ring
Pref.Out:CO-02
Pref.Out:ICM
Pref.Out:Idle
Pref.Out:No
Save
Terminate
Tone Call
Tone Type-2
TRK GRP-3
VTR-101
Voice Call
2 WAY-REC:1234
2 WAY-TRANS:1234
092-555-2111Message Waiting (MESSAGE) button is assigned.
Night button is assigned.
No programming is assigned.
Location number is not assigned.
Select “Prime Line (CO Line) Preference — Incoming.”
Select “No Line Preference — Incoming.”
Select “Ring Line Preference — Incoming.”
Select “Prime Line (CO Line) Preference — Outgoing.”
Select “Prime Line (INTERCOM) Preference — Outgoing.”
Select “Idle Line Preference — Outgoing.”
Select “No Line Preference — Outgoing.”
SAVE button is assigned.
Terminate button is assigned.
Select Ring-Calling mode.
Select ringing tone for a CO button or intercom calls.
Group-CO (G-CO) button is assigned.
Voice Mail (VM) Transfer button is assigned.
Select Voice-Calling mode.
Two-Way Record button is assigned.
Two-Way Transfer button is assigned.
One-Touch Dialling button is assigned.
Conditions
•If the displayed characters exceed sixteen digits,“&”is shown at the right-hand edge.
•The duration time display is only shown when you make or receive an outside call.
Count start time for outgoing calls can be programmed as desired.
• When you confirm key programming,be sure to press a button while on-hook.  If the
“Full One-Touch Dialling”feature is set,dialling mode will start when pressing PF
(Programmable Feature),DSS,SAVE or REDIAL button. 
						

							Appendix9-9
9Appendix
Feature Number List
Numbers listed below are the initial factory setting (default value).  There are the
flexible feature numbers and the fixed feature numbers.  To change the flexible feature
numbers,follow the procedure described in the “System Programming”section in the
Installation Manual.
Flexible Feature Numbers
DefaultRequired Additional Digits
Feature
2
3
—
750
49
46
65
710
710
710
710
710
710
50
53 / 51
52
4
41
40
720
731
79
59
57
56
58
710
710
540 through 9,00 through 99
0 through 9,00 through 99
0 through 9,00 through 99
1 - 9 / 0
Account code + #(99)
2-5 + EXTN. (extension number) / 0
6 + phone number + # / 0
7 + EXTN. / 8 + EXTN. 
(921 / 931 / 941) + MSN + # + phone number + #
(920 / 930 / 940) + MSN + #
90 + MSN + #
0 - 9
EXTN.
1 / 0
1 / 0
1 + EXTN. / 3 + EXTN.
1 / 2 / 0 
lock code (000 - 999) twice / same lock code
1 / 0
1 / 0
1 + EXTN. / 1 + 0 / 1 + 
0
1 / 0
1st hundred extension block
2nd hundred extension block
3rd through 16th hundred extension block
Absent Message Capability set/cancel
Account Code Entry
Automatic Callback Busy (Camp-On) cancel
Background Music (BGM) — External on/off
Call Forwarding – All Calls / Busy / No answer /
Busy/No answer set/cancel
Call Forwarding – to CO Line set/cancel
Call Forwarding – Follow Me set/cancel
Call Forwarding – to ISDN Line – CFU/CFB/CFNR set
cancel
Call Forwarding – to ISDN Line – all cancel
Call Hold
Call Hold,Retrieve outside call/intercom call
Call Park/Call Park Retrieve
Call Pickup,CO Line
Call Pickup,Directed
Call Pickup,Group
Call Pickup Deny set/cancel
Call Waiting set/cancel
Class of Service (COS) Switch – primary/secondary
CLIR once/continue/cancel
CO Incoming Call Information Log Lock lock/unlock
CO Incoming Call Information Log Lock Mode set/cancel
COLR set/cancel
Do Not Disturb (DND) set
cancel
Do Not Disturb for Direct Dialling In set/cancel