Panasonic Kx-Td816e, Kx-td1232e User Manual

							5-50DECT Portable Station Features
5.3PS Programming
Clearing the Settings in Memory (Level 1)
All of the following settings can be returned to their default
settings at one time.
– Call log numbers*
– Ringer volume
– Receiver volume
– PS Programming items 
(except:Selecting the DECT System
Cancelling the PS Registration
Setting the PS Programming Password
Setting the DECT System Lock)
* 
Call log numbers are cleared only when your PSis registered to a
system other than a Panasonic Digital Super Hybrid System.
Cancelling the PS Registration (Level 2)
To cancel your PS registration,use system program [651],“PS
Termination.”If “Rejected”or “Time Out”is displayed in pro-
gram [651],delete the PS again by PS programming.  It may
take a few seconds for the cancel to be completed.
For System Programming,please consult with your dealer.
Setting the Guidance Menu (Level 0)
You can enable the guidance menu.  This will show the selec-
table keys,and help you operate the PS without the operating
instructions.
(Default:OFF)
MEMORY CLEAR
BOOK ()=NEXT
OK ()=OK
# ()=NEXT
OK
*()=PREV
HOLD ()=BACK
C ()=EXIT
C
Guidance Menu
GUIDANCE
= OFF
CANCEL DECT-SYS
= DECT-SYS1 
						

							DECT Portable Station Features5-51
5.3PS Programming
Setting the PS Programming Password (Level 1)
You can set the PS Programming password.  In this case,you
must enter your password in order to display the following
programs.
– Controlling the directory lock
– Clearing the settings in memory
– Setting the PS programming password
(Default:DISABLE)
Setting the DECT System Lock (Level 2)
You can enable or disable the DECT System Lock.  If enabled,
you must enter your password when entering the PS
Programming mode in order to display the following programs.
– Selecting the DECT system
– Cancelling the PS registration
– Setting the DECT system lock
(Default:DISABLE)
DECT-SYS LOCK
= DISABLE
PS PASSWORD
= DISABLE 
						

							PS Programming Operations
PS Programming (– except for Setting the PS Programming Password)
– Make sure the Power Switch is set to ON (l).
– A PS Programming password or DECT System Lock password may be required after step 4.
1.Press(Function).
2.Press(Book) 2 times.
•You can also search by pressing(Next) or
(Previous).
3.Press(OK).
4.Press(OK).
5.Press(Next) or(Previous) repeatedly until the
desired program item is displayed.
6.Press(Book) repeatedly until the desired selec-
tion is displayed.
•This step is not necessary for clearing settings in
memory.
7.Press(OK).
8.Repeat steps 5 through 7 if you want to program other
items.
9.To exit the PS Programming mode,press(Cancel).
C
OK
OK
OK
5-52DECT Portable Station Features
5.3PS Programming
BACKLIGHT
= ON
RING PATTERN
= 1
Example
RING PATTERN
= 6
Example
KEY
PROGRAMMING
PS-PROGRAM
RING PATTERN
= 6 
						

							DECT Portable Station Features5-53
5.3PS Programming
Setting the PS Programming Password / DECT System Lock Password
1.Search for the PS Password or DECT System Lock dis-
play. (Refer to steps 1 through 6 on page 5-52).
2.Press(Book) to select ENABLE.
3.Press(OK).
4.Enter the password(4 digits).
5.Press(OK).
6.Enter thesame passwordagain.
7.Press(OK).
8.To exit the PS Programming mode,press(Cancel).
C
OK
OK
OK
PS PASSWORD
= DISABLE
PS PASSWORD
= ENABLE
ENTER PASSWORD
=
ENTER PASSWORD
= 
****
Example
REENTER PASSWORD
=
REENTER PASSWORD
= 
****
Example Example 
						

							5-54DECT Portable Station Features
5.3PS Programming
Cancelling the PS Programming Password / DECT System Lock Password
1.Search for the PS Password or DECT System Lock dis-
play. (Refer to steps 1 through 6 on page 5-52).
2.Press(Book) to select DISABLE.
3.Press(OK).
4.To exit the PS Programming mode,press(Cancel).
C
OK
PS PASSWORD
= ENABLE
PS PASSWORD
= DISABLE
Example 
						

							DECT Portable Station Features5-55
5.4PBX Programming
PBX Programming Overview
You can enter into the proprietary wired telephone (PT) programming mode and pro-
gram several items for your PS.
The available programs are listed below.  For more details about the programs,refer to
Section 2.2,“Station Programming.”
KEY
MODIFY BOOK
PROGRAMMINGPS-PROGRAM
PBX-PROGRAM
Flexible Button Assignment
Account Button
Conference Button
DSS Button
FWD/DND Button
Group-CO Button
Log-In/Log-Out Button
Loop-CO Button
Message Button
One-Touch Dialling Button
One-Touch Dialling with Auto Hold Button
Save Button
Single-CO Button
Terminate Button
Two-Way Record Button
Two-Way Transfer Button
Voice Mail (VM) Transfer Button
Charge Fee Reference
Preferred Line Assignment – Outgoing
Self-Extension Number Confirmation
Station Programming Data Default Set
Conditions
•The LED will not work when a flexible button is not assigned to a Single-CO,DSS,
Loop-CO or Group-CO button. 
						

							5-56DECT Portable Station Features
5.4PBX Programming
PBX Programming Operations
To execute PBX Programming,you need to switch your PS to the PBX Programming
mode.
To enter the PBX Programming mode
Make sure the Power Switch is set to ON (l) and “”is displayed.
1.Press(Function).
2.Press(Book) 2 times.
•You can also search by pressing(Next) or
(Previous).
3.Press(OK).
4.Press(Book).
•You can also search by pressing(Next) or
(Previous).
5.Press(OK).
•The (Intercom) flashes green.
To exit from the PBX Programming mode
1.Press(Cancel).
Conditions
•For more details about these programs,please
refer to the corresponding programs in
Section 2.2,“Station Programming.”The fol-
lowing PS buttons replace the buttons on a
proprietary telephone (PT).
C
INTOK
OK
KEY
PROGRAMMING
PS-PROGRAM
PBX-PROGRAM
SEL (S1)=(Book)
CLR (S2)=(Clear)
NEXT (S3)=Not available.
PREV=(Redial)
STORE=(OK)
END=(Hold)
OK
CLR
PT ButtonPS Button 
						

							DECT Portable Station Features5-57
5.4PBX Programming
nCharge Fee Reference
— Extension Charge Fee Reference
Provides you with a display of each extension
charge.
•Enter the programming mode.
•Dial 8.
•Enter the ID Code.
•Dial 1+ extension number.
•Press the Bookbutton.
•Press the Clearor OKbutton,if required.
- Clear:To clear the meter and charge
- OK:To print out the total meter and charge
•Press the Hold(END) button three times.
•Exit the programming mode.
— CO Line Charge Fee Reference
Provides you with a display of each CO line
charge.
•Enter the programming mode.
•Dial 8.
•Enter the ID code.
•Dial 2.
•Dial the CO line numberas follows.
- 01 - 08 :if connected to a KX-TD816
- 01 - 24 :if connected to a KX-TD1232
•Press the Bookbutton.
•Press the Clearor OKbutton,if required.
- Clear:To clear the meter and charge
- OK:To print out the total meter and charge
•Press the Hold(END) button three times.
•Exit the programming mode.
— Account Code Charge Fee Reference
Provides you with a display of each account
code charge.
•Enter the programming mode.
•Dial 8.
•Enter the ID Code.
•Dial 3+ location number(01 through 40).
•Press the Bookbutton.•Press the Clearor OKbutton,if required.
- Clear:To clear the meter and charge
- OK:To print out the total meter and charge
•Press the Hold(END) button three times.
•Exit the programming mode.
— Total Extension Charge Fee Reference
Provides you with a display of the total exten-
sion charge.
•Enter the programming mode.
•Dial 8.
•Enter the ID Code.
•Dial 4.  
•Press the Bookbutton.
•Press the Clearor OKbutton,if required.
- Clear:To clear the total meter and charge
- OK:
To print out the total meter and charge of
all extension numbers,and the individual
charges for each extension number
•Press the Hold(END) button twice.
•Exit the programming mode.
— Total CO Line Charge Fee Reference
Provides you with a display of the total CO line
charge.
•Enter the programming mode.
•Dial 8.
•Enter the ID Code.
•Dial 5.  
•Press the Bookbutton.
•Press the Clearor OKbutton,if required.
- Clear:To clear the total meter and charge
- OK:
To print out the total meter and charge of
all CO line numbers,and the individual
charges for each CO line number
•Press the Hold(END) button twice.
•Exit the programming mode. 
						

							5-58DECT Portable Station Features
5.4PBX Programming
— Total Account Code Charge Fee Reference
Provides you with a display of the total account
code charge.
•Enter the programming mode.
•Dial 8.
•Enter the ID Code.
•Dial 6.  
•Press the Bookbutton.
•Press the Clearor OKbutton,if required.
- Clear:To clear the total meter and charge
- OK:
To print out the total meter and charge of
all account codes,and the individual
charges for each account code
•Press the Hold(END) button twice.
•Exit the programming mode.
— Account Code Set
You can assign an account code.
•Enter the programming mode.
•Dial 8.
•Enter the ID Code.
•Dial 7+ location number(01 through 40).
•Press the Clearbutton.
•Enter the new account code (5 digits).
•Press the OKbutton.
•Press the Hold(END) button twice.
•Exit the programming mode.
nFlexible Button Assignment
Each Flexible CO button on your PS can be
assigned as a feature button as follows. 
— Account Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 6.
•Press the Bookbutton.
•Exit the programming mode.
— Conference Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 7.
•Press the Bookbutton.
•Exit the programming mode.— DSS Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 1+ extension number.
•Press the Bookbutton.
•Exit the programming mode.
— FWD/DND Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 4.
•Press the Bookbutton.
•Exit the programming mode.
— Group-CO (G-CO) Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•
Dial #+ CO line group number(1 through 8).
•Press the Bookbutton.
•Exit the programming mode.
— Log-In/Log-Out Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 80.
•Press the Bookbutton.
•Exit the programming mode.
— Loop-CO (L-CO) Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial .
•Press the Bookbutton.
•Exit the programming mode.
— Message Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 3.
•Press the Bookbutton.
•Exit the programming mode.
— One-Touch Dialling Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 2+ desired number.
•Press the Bookbutton.
•Exit the programming mode. 
						

							DECT Portable Station Features5-59
5.4PBX Programming
†:Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
— One-Touch Dialling with Auto Hold Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 8#.
•Dial the desirednumber.
•Press the Bookbutton.
•Exit the programming mode.
— Save Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 5.
•Press the Bookbutton.
•Exit the programming mode.
— Single-CO (S-CO) Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 0.
•Dial the CO line numberas follows.
- 01 - 08 :if connected to a KX-TD816
- 01 - 24 :if connected to a KX-TD1232
•Press the Bookbutton.
•Exit the programming mode.
— Terminate Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 9.
•Press the Bookbutton.
•Exit the programming mode.
— Two-Way Record Button†
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 83+ the Voice Mailextension number.
•Press the Bookbutton.
•Exit the programming mode.
— Two-Way Transfer Button†
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 84+ the Voice Mailextension number.
•Press the Bookbutton.
•Exit the programming mode.— Voice Mail (VM) Transfer Button
•Enter the programming mode.
•Press the desired Flexible CObutton.
•Dial 82+ the Voice Mailextension number.
•Press the Bookbutton.
•Exit the programming mode.
nPreferred Line Assignment — Outgoing
You can select the desired outgoing line prefer-
ence.  When you go off-hook,you can be con-
nected to no line,an idle line,a pre-assigned
line or INTERCOM line.
•Enter the programming mode.
•Dial 1.
•Dial 1,2,3+CO line number,or press the
INTERCOMbutton.
- 1:No Line Preference
- 2:Idle Line Preference
- 3 + CO line number:Prime Line (CO
Line) Preference
- INTERCOM:Prime Line (INTERCOM)
Preference
•Press the Bookbutton.
•Exit the programming mode.
nSelf-Extension Number Confirmation
•Enter the programming mode.
•Dial 6.
•Press the Hold(END) button.
•Exit the programming mode.
nStation Programming Data Default Set
•Enter the programming mode.
•Dial #.
•Press the Bookbutton.
•Exit the programming mode.