Panasonic Kx-Td816e, Kx-td1232e User Manual

							6-6DSS Console Features
6.2DSS Console Features
One-Touch Dialling Assignment
You can assign a DSS or PF button as an One-Touch Dialling button.  The number can be
an extension number or a telephone number.  Up to sixteen digits can be stored into each
memory location.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired DSSor PF button on the console.
2.Dial 2 on the paired telephone.
3.Enter the desirednumber on the paired telephone.
•When you assign an outside phone number,you must dial
the line access code first.
4.Press the STOREbutton on the paired telephone.
•Repeat steps 1 through 4,to program numbers on other DSS
or PF buttons.
—To exit from the Station Programming mode:Press [PROGRAM] or lift the handset.
One-Touch Access Assignment for System Features
You can assign the desired feature number to a DSS or PF button.
—Be sure that you are in the Station Programming mode:Press [PROGRAM] [9] [9].
1.Press the desired DSSor PF button on the console.
2.Dial 2 on the paired telephone.
3.Enter the desired feature number on the paired telephone.

If you wish to gain access to the “Paging — All”feature,enter
feature number,62.
2
2
AUTO DIAL
STORE
4 3
desired number
1
or
2
2
3
feature number
1
or 
						

							DSS Console Features6-7
6.2DSS Console Features
4.Press the STOREbutton on the paired telephone.
•Repeat steps 1 through 4,to program numbers on other DSS
or PF buttons.
—To exit from the Station Programming mode:Press [PROGRAM] or lift the handset.
nTo correct an error while programming
1.Press the CLRbutton (S2) or the TRANSFER(CLEAR)
button on the paired telephone and complete programming.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
nTo erase after programming
1.Press the DSSor PFbutton you wish to erase on the console.
2.Press 2 on the paired telephone.
3.Press the STOREbutton on the paired telephone.
•The number is erased.
AUTO DIAL
STORE
4
S 1
S 2
S 3
CLR
TRANSFER
1
1
or
2
2
AUTO DIAL
STORE
3or 
						

							6-8DSS Console Features
6.2DSS Console Features
Conditions
•DSS buttons can be changed to any of the following function buttons through Station
Programming:
a)Account Button
b)AnotherDSS Button (Every DSS button can be assigned to another extension
number.)
c)Conference (CONF) Button
d)FWD/DND Button
e)Live Call Screening (LCS) Button†
f)Live Call Screening (LCS) Cancel Button†
g)Message Waiting (MESSAGE) Button
h)Night Button
i)One-Touch Dialling Button
j)Phantom Extension Button
k)SAVE Button
l)Two-Way Record Button†
m)Two-Way Transfer Button†
n)Voice Mail (VM) Transfer Button
•PF buttons can be changed to any of the following function buttons through Station
Programming:
a)Account Button
b)Conference (CONF) Button
c)FWD/DND Button
d)One-Touch Dialling Button
e)SAVE Button
f)Voice Mail (VM) Transfer Button
•When the STORE button is pressed after programming,you will hear beep tones as
follows.
— One beep:The entry is changed from one that was stored previously.
— Two beeps:The entry is the same as one stored previously.
Programming References
•Station Programming (Section 2)
Flexible Button Assignment
(System Programming — [005] (Installation Manual) can be used for this assignment.)
•System Programming — Installation Manual
[007]DSS Console Port and Paired Telephone Assignment
†Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable
Panasonic Voice Processing System. (one that supports digital proprietary telephone integration; e.g. KX-
TVP100). 
						

							DSS Console Features6-9
6.2DSS Console Features
One-Touch Access for System Features
You can access system features by pressing a programmed DSS or PF button.
1.Lift the handsetor press the SP-PHONE/MONITORbutton
on the paired telephone.
2.Press the desired DSSor PFbutton on the console.
Direct Station Dialling
An extension can be called and accessed,simply by pressing a DSS button.  The BLF
shows if the extension is engaged.
1.Lift the handsetor press the SP-PHONE/MONITORbutton
on the paired telephone.
2.Press the desired DSSbutton on the console.
One-Touch Dialling
The stored number is dialled automatically by pressing a programmed DSS or PF button.
1.Lift the handsetor press the SP-PHONE/MONITORbutton
on the paired telephone.
2.Press the desired DSSor PF button on the console.
1
2
or 1
2
1
2
or 
						

							6-10DSS Console Features
6.2DSS Console Features
Call Transfer
A call can be transferred to an extension by using the DSS button.  
During a conversation;
1.Press the TRANSFERbutton on the paired telephone.
2.Press the desired DSSbutton on the console.
One-Touch Transfer
An outside call can be transferred to an extension with an one-touch operation.  The One-
Touch Transfer function must be set through System Programming.  
During a conversation;
1.Press the desired DSSbutton on the console.
•The other party is placed on hold and the destination
extension is called immediately.
Programming References
•System Programming — Installation Manual
[108]Automatic Hold by CO/DSS Button
1
2
1
TRANSFER 
						

							DSS Console Features6-11
6.2DSS Console Features
ANSWER / RELEASE Button Operation(KX-T7441 only)
The KX-T7441 DSS Console is provided with an ANSWER and RELEASE button which
are useful for operators who use headsets.
With the ANSWER button,you can answer all incoming calls to the paired telephone.
With the RELEASE button,you can disconnect the line during or after a conversation or
complete a Call Transfer.
Answering a call
1.Press the ANSWERbutton on the console.
•You can talk to the caller with the headset or using the
handsfree mode.
Call Transfer
During a conversation with the headset or handsfree mode
1.Press the TRANSFERbutton on the paired telephone.
2.Press the desired DSSbutton on the console or dial the desired
number at the paired telephone.
3.Press the RELEASEbutton after the party answers.
One-Touch Transfer
An outside call can be transferred to an extension with the one-touch operation.  The
One-Touch Transfer function must be set by System Programming.  
During a conversation with the headset or handset mode
1.Press the desired DSSbutton on the console.
•The other party is placed on hold and the destination
extension is called immediately.
2.Press the RELEASEbutton after the party answers.
Programming References
•System Programming — Installation Manual
[108]Automatic Hold by CO/DSS Button
1
2
1
3
TRANSFER
2RELEASE
RELEASE
desired number
or
1ANSWER 
						

							Section 7
SLT and ISDN Telephone Features
Contents
7.1 Basic Operations ..................................................................
7-2
Making Calls.........................................................................7-2
Receiving Calls .....................................................................7-3
7.2 SLT and ISDN Telephone Features (A - Z) .......................7-4
7.3 ISDN Telephone Features .................................................7-90

If you use loop disconnect (LD) type single line telephone:
It is not possible to have access to the features which have “ ” or “#” in
their feature numbers.
When the “Pickup Dialling (Hot Line)” feature is set on your telephone,
your dialling sequence should be done within a certain period of time
(Pickup Dial Waiting Time — default: 1 sec.) after lifting the handset.
To change the time, refer to the System Programming in the Installation
Manual.
In this manual, the default feature numbers are used to describe each
operation and illustration.  Use newly programmed numbers if you have
changed the number by System Programming. 
						

							7-2SLT and ISDN Telephone Features
7.1Basic Operations
Making Calls
Intercom Calling
Allows you to make a call to another extension.
1.Lift the handset.
2.Dial the extension number.
Outward Dialling
Allows you to make a call to an outside party using one of the following line access
methods:
1.) Line Access,Automatic
2.) Line Access,CO Line Group
1.Lift the handset.
2.Dial the line access code(9 or 81 through 88).
-9:Line Access,Automatic
-81-88:Line Access,CO Line Group
3.Dial the phone number.
Feature References
Intercom Calling
Outward Dialling,Line Access
extension number
1
2
line access code
phone number
1
2
3 
						

							SLT and ISDN Telephone Features7-3
7.1Basic Operations
Receiving Calls
1.Lift the handset.1