Panasonic Kx-Td816e, Kx-td1232e User Manual

							7-34SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Conditions 
•If you want to return to the held call,press the Register Recall button before the
destination extension answers.
•If the destination extension does not answer the call within twelve rings (default),the
“Transfer Recall”occurs.  If the transferred call is an outside call,it is possible to
select whether the Transfer Recall will go to the initiating extension or to the operator
through System Programming.
•If there is no answer for thirty minutes after the “Transfer Recall”starts,the line will
be disconnected.
Programming References
•System Programming — Installation Manual
[201]Transfer Recall Time
[990]System Additional Information,Field (11)
Feature References
Transfer Recall (®see Installation Manual) 
						

							SLT and ISDN Telephone Features7-35
7.2SLT and ISDN Telephone FeaturesC
Call Waiting
While in conversation,a Call Waiting tone informs you that there is a call waiting.  You
can answer the third call by disconnecting or placing the current call on hold.
Setting / Cancelling
1.Lift the handset.
2.Dial the feature number(731).
3.Dial 1or 0.
- 1 :to set
- 0 :to cancel
•You hear a confirmation tone and then a dial tone.
4.Hang up.
To talk to the new caller by terminating the current call
While hearing a Call Waiting tone;
1.Hang up.
•The current call is disconnected.
2.Lift the handset.
•You can talk to the new caller.1
2
1
2
4
3
or 
						

							7-36SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
To talk to the new caller by holding the current call
While hearing a Call Waiting tone;
1.Press the RegisterRecallbutton.
2. Dial the feature number(50).
•The current call is placed on hold.
•You hear a dial tone.
3.Hang up.
4.Lift the handset.
•You can talk to the new caller.
Conditions
•A Call Waiting tone is generated at the extension in the following conditions:
1) When an outside call comes in.
2) When a Doorphone call comes in.
3) When another extension executes the “Busy Station Signalling (BSS)”feature.
•Setting “Data Line Security”cancels this feature.
Feature References
Busy Station Signalling (BSS)
Data Line Security (®see Installation Manual)
1
2
3
R
4 
						

							SLT and ISDN Telephone Features7-37
7.2SLT and ISDN Telephone FeaturesC
Conference
During a two-party conversation,you can add a third party to make a three-party
conference.
The members of a conference on the line may be three extensions,one extension and two
CO lines,or two extensions and one CO line.
To establish a conference
While having a two-party conversation;
1.Press the RegisterRecallbutton.
•The other party is placed on hold.
2.Dial the phone numberof the third party.
3.Press the RegisterRecallbutton after the third party answers.
4.Dial 3.
•You hear a confirmation tone (optional).
•A three-party conference is now established.
To leave the conference
1.Hang up.
•The other two parties may continue their conversation.
•If the other two parties are both CO lines,they will be
disconnected.
To talk to the original party while holding the third party
1.Press the Register Recallbutton.
•You hear a confirmation tone (optional).
•You can talk to the original party.
1
2
3
R
4
phone number
R
1
1
R 
						

							7-38SLT and ISDN Telephone Features
C7.2SLT and ISDN Telephone Features
Conditions
•You can return to the original party before the third party answers by pressing the
Register Recall button.
•Up to six conference calls are allowed simultaneously.
•When a two-party call is changed to a three-party call and vice versa,a confirmation
tone is sent to all three parties.  Eliminating the tone is programmable.
Programming References
•System Programming — Installation Manual
[990]System Additional Information,Field (13) 
						

							SLT and ISDN Telephone Features7-39
7.2SLT and ISDN Telephone FeaturesC
Connected Line Identification Restriction (COLR)
Allows you to restrict the presentation of your number to the calling party when you
receive the incoming call.  You can set the calling party not to see your number on the
display.  This feature is an ISDN service.
To restrict or allow the presentation of your number to the calling party
1.Lift the handset.
2.Dial the feature number(58).
3.Dial 1or 0.
- 1 :to restrict
- 0 :to allow
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Programming References
•System Programming — Installation Manual
[419]Subscriber Number Assignment
[517]Connected Line Identification Restriction
1
2
4
3
or 
						

							7-40SLT and ISDN Telephone Features
D7.2SLT and ISDN Telephone Features
Do Not Disturb (DND)
Allows you to prevent other parties from disturbing you.  You can select to send a DND
tone to incoming calls or to transfer an incoming outside call to the assigned extension.
Setting
1.Lift the handset.
2.Dial the feature number(710) and 1.
3.Dial the desired number as follows.
– extension number:for the backup station
– 0:to operator (backup station)
– :no backup
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Cancelling
1.Lift the handset.
2.Dial the feature number(710) and 0.
•You hear a confirmation tone and then a dial tone.
3.Hang up.
1
2
3
extension number,0 or 
4
1
2
3 
						

							SLT and ISDN Telephone Features7-41
7.2SLT and ISDN Telephone FeaturesD
Conditions
•An incoming outside call (directed by Intercept Routing or DIL 1:1 extension) can be
automatically transferred to the backup station (pre-assigned extension),while all
incoming intercom calls will hear the DND tone.
•If the extension is already set as the destination of the“Call Forwarding,”“Do Not
Disturb (DND)”and “Do Not Disturb for Direct Dial In Calls”features,you cannot
set this feature and when you set this feature,you hear a reorder tone.
•While the operator is set as the destination of the “Do Not Disturb (DND)”feature,
even if the operator is different from Day mode and Night mode,an incoming call
will be transferred to an operator.  If the operator is not assigned,an incoming call
will be transferred to the IRNA. 
•A calling extension that has “Do Not Disturb (DND) Override”enabled can override
your extension when it is set to “Do Not Disturb (DND)”mode.
Feature References
Call Forwarding
Do Not Disturb (DND) Override
Do Not Disturb for Direct Dialling In Calls
Intercept Routing (® see Installation Manual) 
						

							7-42SLT and ISDN Telephone Features
D7.2SLT and ISDN Telephone Features
Do Not Disturb for Direct Dialling In Calls
Allows you to set “Do Not Disturb (DND)”feature for Direct Dialling In (DDI) calls.
DDI calls will be transferred to the operator.  The operator cannot set this feature.
Setting / Cancelling
1.Lift the handset.
2.Dial the feature number(54).
3.Dial 1or 0.
- 1 :to set
- 0 :to cancel
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Conditions
•When this feature is set,an incoming call (directed by Intercept Routing or DIL 1:1,
DIL 1:N) can be answered.
•Even if this feature is set,your extension does not deny DDI calls if the destination of
DDI calls is in the Hunting group.
•When you set this feature,“Call Forwarding”and “Do Not Disturb (DND)”features
will be cancelled.
•While you set this feature,if you go off-hook,you hear a special dial tone.
Feature References
Call Forwarding
Do Not Disturb (DND)
Do Not Disturb (DND) Override
Direct Dialling In (®See Installation Manual)
1
2
4
3
or 
						

							SLT and ISDN Telephone Features7-43
7.2SLT and ISDN Telephone FeaturesD
Do Not Disturb (DND) Override
Allows you to call an extension even though the “Do Not Disturb (DND)”feature is set.
System Programming is necessary to use this feature.
If you make an intercom call and hear a Do Not Disturb (DND)
tone;
1.Dial 2.
•Wait for an answer.
Conditions
•If you hear a reorder tone after dialling 2,this means the “Do Not Disturb (DND)
Override”feature is not set at your extension.
•You must dial 2 within ten seconds after hearing a Do Not Disturb (DND) tone.
•“Class of Service”programming determines the extensions that can perform this
feature.
Programming References
•System Programming — Installation Manual
[507]Do Not Disturb Override
[601]Class of Service
Feature References
Do Not Disturb (DND)
1