Panasonic Kx-Td816e, Kx-td1232e User Manual

							4-122DPT Features
Q4.2DPT Features
Quick Dialling
Allows you to make a quick dialling by pressing a pre-assigned quick dial number.
Dialling
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the quick dial number.
Conditions
•Up to eighty quick dial numbers can be stored by System Programming.
•You must assign a feature number first in program [104] “Quick Dial Assignment,”
and then a quick dial number in program [009] “Quick Dial Number Set”in order for
Quick Dial to be effective.
•For example,Quick Dialling is convenient for room service calls in a hotel.
Programming References
•System Programming — Installation Manual
[009]Quick Dial Number Set
[104]Quick Dial Assignment
2 1
quick dial number 
						

							DPT Features4-123
4.2DPT FeaturesR
Recall 
Allows you to disconnect from the current call and make another call without hanging up.
While hearing any  tone,dialling,or talking;
1.Press the RECALLor FLASH/RCLbutton.
•You hear a dial tone.
2.Dial the phone number.
Conditions
•Disconnection signal must be selected by System Programming in order to execute
this feature during an outside call.
Programming References
•System Programming — Installation Manual
[414]Disconnect Time
[990]System Additional Information,Fields (3),(15)
Feature References
External Feature Access
2
phone number
1
orRECALLFLASH/RCL 
						

							4-124DPT Features
R4.2DPT Features
Redial,Automatic 
To redial the last dialled number,saved number,“CO Outgoing Call Log”number,“CO
Incoming Call Information Log”number or “Notebook Function”number automatically,
go off-hook with the SP-PHONE button or press the corresponding button directly.
Redial will be automatically repeated a programmed number of times until the called
party answers.
Refer to each feature for dialling operation.
Conditions
•The default setting for redialling is four redials initiated at two minutes intervals.
Redialling times can be changed (1 through 12) by System Programming.
•If there is an incoming call during redialling,the redialling process will be delayed
until the termination of the incoming call.
•If any key operation is done during Automatic Redial,this function is cancelled.
•This feature is not available with the KX-T7250 because it is not provided with the SP-
PHONE button.
Programming References
•System Programming — Installation Manual
[209]Automatic Redial Repeat Times
[210]Automatic Redial Interval Time
Feature References
CO Incoming Call Information Log
CO Outgoing Call Log (4.4/Special Display Features)
Notebook Function
Redial,Last Number
Redial,Saved Number 
						

							DPT Features4-125
4.2DPT FeaturesR
Redial,Last Number
Automatically saves the last outside call number you dialled and allows you to make the
same outgoing call again.
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Press the REDIALbutton.
Conditions
•Up to twenty-four digits can be stored and redialled; this does not include the CO line
access code.
•“,”“#,”“PAUSE,”and “INTERCOM”(for secret dialling) are counted as one digit.
•If you hear a busy tone when attempting to redial,select another line and press the
REDIAL button.
•The memorised telephone number is replaced by a new one if at least one digit to be
sent to a CO line is dialled.  Dialling a CO line access code alone does not change the
memorised number.
•Certain types of proprietary telephones allow multiple redialling automatically
(Redial,Automatic).
Feature References
Redial,Automatic
1
2
REDIAL 
						

							4-126DPT Features
R4.2DPT Features
Redial,Saved Number
Allows you to store a telephone number,while connected to a CO line,and automatically
redial the number later.  The saved number can be redialled many times until another one
is stored.
Storing
While having a conversation or hearing a busy tone;
1.Press the AUTO DIAL/STOREbutton.
2.Press the flexible buttonwhich is assigned as the SAVE
button.
Dialling
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Press the flexible buttonwhich is assigned as the SAVE
button.
Conditions
•Up to twenty-four digits can be stored and redialled; this does not include the CO line
access code.
•“
,”“#,”“PAUSE,”and “INTERCOM”(for secret dialling) are counted as one digit.
•Certain types of proprietary telephones allow multiple redialling automatically
(Redial,Automatic).
•A flexible button can be assigned as the SAVE button.
Programming References
•Station Programming (Section 2)
Flexible Button Assignment — SAVE Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Feature References
Redial,Automatic
1
2
AUTO DIAL
STORE
1
2 
						

							DPT Features4-127
4.2DPT FeaturesS
Secret Dialling
Allows you to conceal all or part(s) of a “System Speed Dialling”or “One-Touch
Dialling”number assigned to a flexible button on your proprietary telephone (PT) and
DSS Console which normally appears on the display.  Additionally,KX-T7235,KX-
T7431,KX-T7433 and KX-T7436 Model Telephones are capable of Secret Dialling for
“Station Speed Dialling”numbers.
When storing the phone number;
1.Press the INTERCOMbutton beforeand afterthe part you
wish to conceal.
•The display shows:

(—“201”is not shown on the
display when you dial.)
Conditions
•The secret code,“[”or “]”(pressing the INTERCOM button),is counted as one digit.
•You can conceal one or more digits of a telephone number.
•If the phone number “9-1-[201]-431-2111”has been stored,the display shows the
following when the call is made:
•You can select whether the concealed part will be printed out by SMDR through
System Programming.
Programming References
•Station Programming (Section 2)
Flexible Buttons Assignment — One-Touch Dialling Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Station Speed Dialling Number / Name Assignment(KX-T7235 / KX-T7431 / KX-T7433 /
KX-T7436 only)
•System Programming — Installation manual
[001]System Speed Dialling Number Set
[990]System Additional Information,Field (53)
Feature References
One-Touch Dialling
Station Speed Dialling
System Speed Dialling
9-1-[201]...
-1-...
-431-2111
1
INTERCOM 
						

							4-128DPT Features
S4.2DPT Features
Station Feature Clear
Allows you to reset the following station features to the default settings.
a)Absent Message Capability
b)Automatic Callback Busy (Camp-On)
c)Background Music (BGM)
d)Call Forwarding
e)Call Pickup Deny
f)Call Waiting
g)Calling Line Identification Restriction (CLIR)
h)CO Incoming Call Information Log
i)Connected Line Identification Restriction (COLR)
j)Do Not Disturb (DND)
k)Log-In
l)Message Waiting – (All messages will be removed)
m)Paging — DENY
n)Parallelled Telephone Connection
o)Pickup Dialling (Hot Line) – (The stored telephone number will be removed)
p)Timed Reminder
Clearing current feature setting
1.Lift the handset or press the SP-PHONE/MONITORbutton.
2.Dial the feature number(790).
•You hear a confirmation tone and then a dial tone.
•The display shows:
3.Hang upor press the SP-PHONE/MONITORbutton.
Ext Data Clear
1
2
3
790 
						

							DPT Features4-129
4.2DPT FeaturesS
Station Speed Dialling
Allows you to store up to ten speed dial numbers at your extension.  These numbers are
available to your extension only.
Storing the phone number
1.Lift the handset or press the SP-PHONE/MONITORbutton.
2.Dial the feature number(60).
3.Dial the Station Speed Dial number(0 through 9).
4.Dial the desired numberand #.
•You hear a confirmation tone.
5.Hang up or press the SP-PHONE/MONITORbutton.
Dialling
1.Lift the handsetor press the SP-PHONE/MONITORbutton.
2.Dial the feature number (6).
3.Dial the Station Speed Dial number(0 through 9).
1
4
desired number and #
2
5
60
3
Station Speed Dial number
1
2
6
3
Station Speed Dial number 
						

							4-130DPT Features
S4.2DPT Features
Conditions
•You can store an extension number,a telephone number,or a feature number of up to
sixteen digits.
•To store the telephone number of an outside party,the line access code (9 or 81
through 88) must be stored as the leading digit.
•Valid digits are “0 through 9,”“”and PAUSE button.
•“Station Speed Dialling”can be followed by manual dialling to supplement the
dialled digits.
•With the KX-T7235,KX-T7431,KX-T7433 and KX-T7436,you can store not only
phone numbers but names as well.  Moreover,you can execute this feature using the
display operation.
Programming References
•Station Programming (Section 2)
Flexible Button Assignment — One-Touch Dialling Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Station Speed Dialling Number / Name Assignment(KX-T7235 / KX-T7431 / KX-T7433 /
KX-T7436 only)
Feature References
Station Speed Dialling (4.4/Special Display Features) 
						

							DPT Features4-131
4.2DPT FeaturesS
System Speed Dialling 
Allows you to make a call using speed dial numbers previously programmed.  This system
supports five hundredspeed dial numbers which are available to all extension users.
1.Lift the handset or press the SP-PHONE/MONITORbutton.
•The INTERCOM indicator light turns green.
2.Press the AUTO DIAL/STOREbutton.
•The AUTO DIAL/STORE indicator light turns on.
•You hear no tone.
3.Dial the System Speed Dial number (000 through 499).
•The AUTO DIAL/STORE indicator light turns off.
Conditions
•System Speed Dial numbers must be stored either through User (Manager) or System
Programming.
•“Speed Dialling,”“One-Touch Dialling,”“Redial,Last Number/Saved Number”and
manual dialling can be used together.
•Continuous use of a speed dial number is possible,if the number is divided to store.
 If the number is divided and stored in System Speed Dial numbers 001 and 002;
Press:[AUTO DIAL/STORE] [0] [0] [1] [AUTO DIAL/STORE] [0] [0] [2]
•The dialled number appears on the display.
•You may press a CO button to select a desired CO line before pressing the AUTO
DIAL/STORE button.
•Calls originated by System Speed Dialling are restricted depending on the extension’s
toll restriction level (Toll Restriction Override for System Speed Dialling).
•With the KX-T7235,KX-T7431,KX-T7433 and KX-T7436,you can execute this
feature using the display operation.
Programming References
•User Programming (Section 3) / System Programming (Installation Manual)
[001]System Speed Dialling Number Set
[002]System Speed Dialling Name Set
Feature References
System Speed Dialling (4.4/Special Display Features)
Toll Restriction Override for System Speed Dialling
1
3
System Speed Dial number
2
AUTO DIAL
STORE