Panasonic Kx-Td816e, Kx-td1232e User Manual

							7-44SLT and ISDN Telephone Features
D7.2SLT and ISDN Telephone Features
Doorphone Call
Allows you to have a conversation with a visitor at your doorphone.  You can also unlock
the door from your telephone.
Calling an extension from a doorphone
1.Press the Doorphonebutton.
•The visitor hears a beep.
•Wait for an answer and talk.
Answering a doorphone call
When you hear the doorphone ring tone at the extension;
1.Lift the handset.
Calling a doorphone
1.Lift the handset.
2.Dial the feature number(61).
3.Dial a doorphone numberas follows.
-1 or 2:if you are connected to the KX-TD816
-1 through 4:if you are connected to the KX-TD1232
•You can talk after you hear a confirmation tone.
To unlock the door from an assigned extension
1.Lift the handset.
2.Dial the feature number(55).
3.Dial a door opener numberas follows.
-1 or 2:if you are connected to the KX-TD816
-1 through 4:if you are connected to the KX-TD1232
•You hear a confirmation tone.
•The door is left unlocked for 5 seconds.
1
1
1
2
1
2
3
doorphone number
3
doorphone number 
						

							SLT and ISDN Telephone Features7-45
7.2SLT and ISDN Telephone FeaturesD
4.Hang up.
To unlock the door while talking to the doorphone from any extension
1.Press the RegisterRecallbutton.
•You hear a confirmation tone and then a dial tone.
2.Dial 5.
•You hear a confirmation tone.
•The door is left unlocked for 5 seconds.
3.Hang up.
Conditions
•You must dial 5 within ten seconds after pressing the Register Recall button.
•If you do not answer an incoming doorphone call within thirty seconds,the call is
cancelled.
•You must program the extensions that can receive calls from each doorphone for day
and night mode.
•“Class of Service”programming determines the extension that can unlock the door.
•It is possible for any extension users to originate a call to a doorphone.
•The door opener 1 through 4 can be unlocked using the feature number,while the
doors which are paired with the doorphone 1 through 4 can be unlocked while talking
to the doorphone.
•The door opener 1 and 2 and the doorphone 1 and 2 are related to the master cabinet,
the door opener 3 and 4 and the doorphone 3 and 4 are related to the slave cabinet.
•Doorphone calls can be forwarded to ISDN S0 lines.  The destination phone numbers
can be assigned in System Programming.
Programming References
•System Programming — Installation Manual
[122]Automatic Door Open Assignment
[511]Door Opener Access
[607]–[608]Doorphone Ringing Assignment — Day/Night
[625]–[626]Doorphone Call Forwarding — Day/Night
1
2
3
R
4 
						

							7-46SLT and ISDN Telephone Features
E7.2SLT and ISDN Telephone Features
Electronic Station Lockout
Allows you to lock your extension so that other users cannot make outgoing outside calls
at your extension.
Locking
1.Lift the handset.
2.Dial the feature number(77).
3.Dial the lock code(000 through 999).
4.Dial the same lock codeagain.
•You hear a confirmation tone and then a dial tone.
5.Hang up.
Unlocking
1.Lift the handset.
2.Dial the feature number(77).
3.Dial the same lock codeas you used to lock the extension.
•You hear a confirmation tone and then a dial tone.
4.Hang up.
1
2
3
4
lock code
5
lock code
1
2
3
4
lock code 
						

							SLT and ISDN Telephone Features7-47
7.2SLT and ISDN Telephone FeaturesE
Conditions
•An attempt to dial to a CO line from a locked extension receives reorder tone.
•The extension assigned as an operator can set and cancel this function for another
extension (Remote Station Lock Control).
•“Remote Station Lock Control”overrides this feature.  If the operator sets Remote
Station Lock on the extension you have already locked,you cannot unlock it.
Feature References
Remote Station Lock Control (4.3/Operator Service Features)
Emergency Call
Allows you to make an emergency CO call without dial restriction.  You can store up to
ten emergency numbers.  “999”and “112”are the default settings and the others can be
stored through System Programming.
Dialling
1.Lift the handset.
•You hear a dial tone.
2.Dial the line access code(9 or 81 through 88).
3.Dial the desired emergency number.
Conditions
•The emergency call will override the toll restriction level,the “Electric Station
Lockout”feature,and the account code mode,“Verified — All Calls”or “Verified —
Toll Restriction Override.”
Programming References
•System Programming — Installation Manual
[311]Emergency Dial Number Set
1
2
emergency number
line access code
3 
						

							7-48SLT and ISDN Telephone Features
E7.2SLT and ISDN Telephone Features
External Feature Access
Allows you to access special features (e.g. Call Waiting) offered by a host PBX,Centrex
or Office.  This feature is effective only during an outside call.  
While having a conversation with an outside party;
1.Press the Register Recallbutton.
•The current call is placed on hold.
2.Dial the feature number(64).
3.Dial the codefor the desired service.
Conditions
•The “Register Recall Signal”must be assigned as required by the Centrex,host PBS,
or CO line.
Programming References
•System Programming — Installation Manual
[413]Register Recall Signal Time
1
2
3
R
phone number 
						

							SLT and ISDN Telephone Features7-49
7.2 SLT and ISDN Telephone FeaturesH
Hotel Application — Room Management
Allows you to print out the information of a guest room (e.g. cleaning status of the
room and the total of the minibar charge) with a telephone in each room.  Messages
No.6 through No.9 can be printed out.
 Message 7: “Cleaned-up”
1. Lift the handset.
2. Dial the feature number(750) and 7.
3.Hang up.
 Message 8: “Minibar £ %%%.%”
1. Lift the handset.
2. Dial the feature number(750) and 8.
3. Enter the minibar charge.
4.Hang up.
1
2
3
1
2
3
minibar charge
4 
						

							7-50SLT and ISDN Telephone Features
H7.2SLT and ISDN Telephone Features
Data similar to below is printed out.
Conditions
•System Programming is required to program the messages.
•This operation is the same as the Absent Message feature.
•It is necessary to assign [990] “System Additional Information,Field (34)”through
System Programming beforehand.
Programming References
•User Programming (Manager Programming) (Section 3)
[008]Absent Messages
•System Programming — Installation Manual
[008]Absent Messages
[990]System Additional Information,Field (34)
DateTimeExtCODial NumberDurationCostAcc CodeCD
24.03.9514:09221Cleaned-up
24.03.9510:23230Minibar £ 535.5 
						

							SLT and ISDN Telephone Features7-51
7.2SLT and ISDN Telephone FeaturesI
Intercom Calling
Allows you to make a call to another extension.
1.Lift the handset.
2.Dial the extension number.
3.Start talking.
4.Hang upafter completion of the conversation.
Conditions
•After dialling an extension number,you will hear one of the following tones:
Ringback tone:Indicates that the destination extension is being called.
Confirmation tone:Indicates that you can perform voice calling.
Busy tone:Indicates that the destination extension is busy.
Do Not Disturb (DND) tone:Indicates that the destination extension has been set
the “Do Not Disturb (DND)”feature.
Programming References
•User Programming (Section 3) / System Programming (Installation Manual)
[003]Extension Number Set
[004]Extension Name Set
1
2
extension number
4
3 
						

							7-52SLT and ISDN Telephone Features
L7.2SLT and ISDN Telephone Features
Lockout
If one party in a conversation goes on-hook,they are both disconnected from the speech
path automatically.  Reorder tone is sent to the off-hook party before it is disconnected.
No operation is necessary.
Log-In / Log-Out
Allows you to assign the log-in mode or log-out mode within the hunting or UCD
group.
When in the log-out mode,you can leave the group temporarily,preventing the hunting
calls being sent to your extension.
Log-In / Log-Out
1.Lift the handset.
2.Dial the feature number(45).
3.Dial 1or 0.
- 1 :for Log-In mode
- 0 :for Log-Out mode
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Conditions
•Default is “Log-In”mode.
•There should be at least one extension that is in log-in mode.  Only one log-in
extension cannot be set in log-out mode.
Feature References
Uniform Call Distribution (UCD)
Station Hunting (
®see Installation Manual)
1
2
4
3
or 
						

							SLT and ISDN Telephone Features7-53
7.2SLT and ISDN Telephone FeaturesM
Message Waiting
Allows you to leave a message for another extension.  If the destination extension is
provided with a message waiting lamp,it will be lit.  Even if a lamp is not provided,the
extension will provide a special ringing and dial tone (dial tone 4*) to indicate that a
message has been received.
Setting
1.Lift thehandset.
2.Dial the feature number(70) and 1.
3.Dial the extension numberwhere calls will be left.
•You hear a confirmation tone and then a dial tone.
4.Hang up.
If the called extension is busy;
1.Dial 4.
•You hear a confirmation tone and then a dial tone.
•You must dial 4 within 5 seconds after dialling extension
number.
2.Hang up.
Cancelling
1.Lift the handset.
2.Dial the feature number (70) and 0.
1
2
3
4
extension number
1
2
1
2