Panasonic Kx-Td816e, Kx-td1232e User Manual

							7-64SLT and ISDN Telephone Features
P7.2SLT and ISDN Telephone Features
Paging — All
Allows you to make a voice announcement to all extensions.  Your message is announced
over the built-in speakers of the proprietary telephones (PT) and external pagers.
1.Lift the handset.
2.Dial the feature number(62 or 63) and .
•You hear a confirmation tone (optional).
3.Make the announcement.
4.Waitfor an answer and talk.
Paging — External
Allows you to make a voice announcement over external pagers.
To access all external pagers
1.Lift the handset.
2.Dial the feature number(62) and 0.
•You hear a confirmation tone (optional).
3.Make the announcement.
1
2
3
or
4
1
2
3 
						

							SLT and ISDN Telephone Features7-65
7.2SLT and ISDN Telephone FeaturesP
4.Waitfor an answer and talk.
To access a particular pager only
1.Lift the handset.
2.Dial the feature number(62).
3.Dial theexternal pager number(1 or 2) or (1 through 4) you
wish to use.
-1 or 2:if you are connected to the KX-TD816
-1 through 4:if you are connected to the KX-TD1232
•You hear a confirmation tone (optional).
4.Make the announcement.
5.Waitfor an answer and talk.
Conditions
•If the designated pager is being used,a busy tone is heard.
•The paging priorities are as follows:
1) TAFAS (Trunk (CO Line) Answer From Any Station)
2) Paging — External
3) Background Music (BGM) — External
If a higher priority page is requested when a lower priority page is active,the higher
priority overrides the lower one.
Feature References
Background Music (BGM) — External (4.3/Operator Service Features)
Trunk (CO Line) Answer From Any Station (TAFAS)
4
1
2
3
4
external pager number
5 
						

							7-66SLT and ISDN Telephone Features
P7.2SLT and ISDN Telephone Features
Paging — Group
Allows you to select an extension group and make a voice announcement.  You can
select a maximum of 16 extension groups simultaneously.  The announcement can only
be heard through the built-in speakers of extensions.
To access all groups simultaneously
1.Lift the handset.
2.Dial the feature number(63) and 00.
•You hear a confirmation tone (optional).
3.Make the announcement.
4.Waitfor an answer and talk.
To access a particular group of extensions
1.Lift the handset.
2.Dial the feature number(63).
3.Dial the extension group number (01 through 16).
•You hear a confirmation tone (optional).
4.Make the announcement.
1
2
3
4
1
2
3
4
extension group number 
						

							SLT and ISDN Telephone Features7-67
7.2SLT and ISDN Telephone FeaturesP
5.Waitfor an answer and talk.
Conditions
•There is a maximum of 16 extension groups.  “Paging — Group”to different groups
can be performed simultaneously.
5 
						

							7-68SLT and ISDN Telephone Features
P7.2SLT and ISDN Telephone Features
Paging — ANSWER
Allows you to answer an announced page at any extension within the system.
Answering a page sent to the built-in speaker
1.Lift the handset.
2.Dial the feature number(43).
•You hear a confirmation tone (optional).
•You can start talking.
Answering a page sent to a particular external pager
1.Lift the handset.
2.Dial the feature number(42).
3.Dial the corresponding external pager numberas follows.
-1 or 2:if you are connected to the KX-TD816
-1 through 4:if you are connected to the KX-TD1232
•You hear a confirmation tone (optional).
•You can start talking.
Conditions
•Only extensions within the paged group can answer “Paging — Group.”
•A confirmation tone is audible when the page is answered.  Eliminating the tone is
programmable.
Programming References
•System Programming — Installation Manual
[990] System Additional Information,Field (16)
1
2
1
2
3
external pager number 
						

							SLT and ISDN Telephone Features7-69
7.2SLT and ISDN Telephone FeaturesP
Paging and Transfer
You can transfer a call using the paging function (Paging — All,Paging — External,or
Paging — Group).
Using Paging — All
While having a conversation;
1.Press the Register Recallbutton.
•You hear a dial tone.
•The other party is placed on hold.
2.Dial the feature number(62 or 63) and .
•The feature number can be the one for either group or
external paging.
3.Make the announcementafter hearing a confirmation tone
(optional).
4.Waitfor the other party to answer.
•You hear a confirmation tone (optional).
5.Hang up.
•The held party and the paged extension are connected and
can start conversation.
Using Paging — External:to all external pagers
While having a conversation;
1.Press the Register Recallbutton.
•You hear a dial tone.
•The other party is placed on hold.
2.Dial the feature number(62) and 0.
1
2
3
or
4
5
R
1
2
R 
						

							7-70SLT and ISDN Telephone Features
P7.2SLT and ISDN Telephone Features
3.Make the announcement after hearing a confirmation tone
(optional).
4.Waitfor the other party to answer.
•You hear a confirmation tone (optional).
5.Hang up.
•The held party and the paged extension are connected and
can start conversation.
Using Paging — External:to a particular external pager
While having a conversation;
1.Press the Register Recallbutton.
•You hear a dial tone.
•The other party is placed on hold.
2.Dial the feature number(62).
3.Dial an external pager numberas follows.
-1 or 2:if you are connected to the KX-TD816
-1 through 4:if you are connected to the KX-TD1232
4.Make the announcementafter hearing a confirmation tone
(optional).
5.Waitfor the other party to answer.
•You hear a confirmation tone (optional).
6.Hang up.
•The held party and the paged extension are connected and
can start conversation.
3
4
5
1
2
3
4
5
R
6
external pager number 
						

							SLT and ISDN Telephone Features7-71
7.2SLT and ISDN Telephone FeaturesP
Using Paging — Group:to all extension groups
While having a conversation;
1.Press the Register Recall button.
•You hear a dial tone.
•The other party is placed on hold.
2.Dial the feature number(63) and 00.
3.Make the announcementafter hearing a confirmation tone
(optional).
4.Waitfor the other party to answer.
•You hear a confirmation tone (optional).
5.Hang up.
•The held party and the paged extension are connected and
can start conversation.
Using Paging — Group:to a particular extension group
While having a conversation;
1.Press the Register Recallbutton.
•You hear a dial tone.
•The other party is placed on hold.
2.Dial the feature number(63).
3.Dial a paging group number(01 through 16).
4.Make theannouncement after hearing a confirmation tone
(optional).
5.Waitfor the other party to answer.
•You hear a confirmation tone (optional).
6.Hang up.
•The held party and the paged extension are connected and
can start conversation.
1
2
3
4
5
R
1
2
3
4
5
R
paging group number
6 
						

							7-72SLT and ISDN Telephone Features
P7.2SLT and ISDN Telephone Features
Conditions
•A confirmation tone is audible when the page is answered.  Eliminating the tone is
programmable.
Programming References
•System Programming — Installation Manual
[990]System Additional Information,Field (16)
Parallelled Telephone Connection
A proprietary telephone (PT) can be connected in parallel with a single line telephone
(SLT).  This feature allows you to enable or disable SLT ringing.  When a parallel
connection is made,either telephone can be used.  The SLT can be disabled by the PT
user.
Conditions
•Default is “Parallel Off.”
•When receiving a call:
—If SLT ringing is enabled,then both the PT and the SLT ring except when the PT
is in “Handsfree Answerback”mode or Voice-Calling mode with the “Alternate
Calling — Ring/Voice”feature.
—If SLT ringing is disabled,then the PT rings but the SLT does not.  However the
SLT can answer the call.
•If you go off-hook while your parallelled telephone is in use,the call will switch over
to your telephone,and vice versa.
•“XDP*”feature is available.  Refer to the Installation Manual.
Feature References
Alternate Calling — Ring/Voice (4.2/DPT Features)
EXtra Device Port (XDP) (®see Installation Manual)
Handsfree Answerback (4.2/DPT Features)
*XDP (eXtra Device Port) expands the number of telephones available in the system by allowing an
extension port to contain two telephones. 
						

							SLT and ISDN Telephone Features7-73
7.2SLT and ISDN Telephone FeaturesP
Pickup Dialling (Hot Line)
Allows you to make an outgoing call by lifting the handset.
Programming the phone number
1.Lift the handset.
2.Dial the feature number(74) and 2.
3.Dial the phone numberand #.
•You must dial the line access code (9 or 81 through 88) as a
leading digit when calling an outside party.
•You hear a confirmation tone and then a dial tone.
4.Hang up.
Setting / Cancelling
1.Lift the handset.
2.Dial the feature number(74).
3.Dial 1or 0.
- 1 :to set
- 0 :to cancel
•You hear a confirmation tone and then a dial tone.
4.Hang up.
1
2
3
4
phone number and #
1
2
4
3
or