Canon Imagerunner Advance C9280 Pro User Guide

							English
9
 Preface 
1
 Top Page of the e-Manual 
 
21
3456
7
8
9101112 
   Enter keyword(s) here 
 Enter a key word in the search dialog box, and press 
. The search results page is displayed. 
 
  Select from functions   The instructions of each function and operation method 
are described. 
 
 [Top]   The top page of the e-Manual is displayed. 
 
 [Site map]   The site map of the e-Manual is displayed. 
 
 [Help]   The usage of the e-Manual is displayed. 
 
 [Glossary]   The glossary is displayed. 
    
  First of all… 
 This section describes the required information to use the 
machine, and the information of optional product and 
software. 
 
  Select from purpose   This section includes the introduction of functions of the 
machine for each purpose. 
 
 [Offi   ce Locations] 
 Inquiries for the machine are displayed. 
 
 [Trademarks]   The trademarks are displayed. 
 
 [Copyright]   The information of copyrights is displayed. 
 
 [Disclaimers]   The disclaimers are displayed. 
 
Ô Performing a Search 
 Enter a keyword in the entry fi  eld which is located at the top of the “Top page” or on the search area in the “Topic page,” and 
then click 
 to display the search results. 
 
Ô Printing a Topic Page 
•  On a topic page, you can print by category or by topic. •  Depending on the settings of the Web browser, the background colour and images of the topic page may not be printed. 
 
						

							10  Preface 1
   Legal  Notices 
 Product  Name 
 Safety regulations require the product’s name to be 
registered. In some regions where this product is sold, 
the following name(s) in parenthesis may be registered 
instead. 
•   imageRUNNER ADVANCE C9280 PRO/C7280i/C7270i 
(F162500) 
• imageRUNNER ADVANCE C7260i (F162502)   
 EMC requirements of EC Directive 
 This equipment conforms with the essential EMC 
requirements of EC Directive. We declare that this product 
conforms with the EMC requirements of EC Directive at 
nominal mains input 230 V, 50 Hz although the rated 
input of the product is 220 to 240 V, 50/60 Hz. Use of 
shielded cable is necessary to comply with the technical 
EMC requirements of EC Directive. 
 Laser  Safety 
 This Product is certifi ed as a Class 1 laser product under 
IEC60825-1:2007 and EN60825-1:2007. This means that 
the product does not produce hazardous laser radiation. 
 Since radiation emitted inside the product is completely 
confi ned within protective housings and external covers, 
the laser beam cannot escape from the machine during 
any phase of user operation. 
 Do not remove protective housings or external covers, 
except as directed by the equipment’s manual. 
 Additional  Information 
 When servicing or adjusting the optical system of 
the product, be careful not to place screwdrivers or 
other shiny objects in the path of the laser beam. Also, 
accessories such as watches and rings should be removed 
before working on the product. 
 The  refl ected beam, even though visible or invisible, can 
permanently damage your eyes. 
    
   
 This Product has been classifi ed under IEC60825-1:2007 
and EN60825-1:2007, which conform to the following 
classes; 
 CLASS 1 LASER PRODUCT 
 LASER KLASSE 1 
 APPAREIL Á LASER DE CLASSE 1 
 APPARECCHIO LASER DI CLASSE 1 
 PRODUCTO LÁSER DE CLASE 1 
 APARELHO A LASER DE CLASSE 1 
 LUOKAN 1 LASER-TUOTE 
 LASERPRODUKT KLASS 1 
    Use of controls, adjustments, or performance of 
procedures other than those specifi
  ed in the manuals 
for this machine may result in hazardous radiation 
exposure. 
 International ENERGY STAR 
Program 
As an ENERGY STAR® Partner, 
Canon Inc. has determined 
that this machine meets the 
international ENERGY STAR 
Program for energy effi   ciency.
The International ENERGY 
STAR Offi   ce Equipment 
Program is an international 
program that promotes energy 
saving through the use of 
computers and other offi   ce 
equipment. The program 
backs the development and 
dissemination of products 
with functions that eff  ectively 
reduce energy consumption. 
It is an open system in which 
business proprietors can 
participate voluntarily. The 
targeted products are offi   ce 
equipment, such as computers, 
displays, printers, facsimiles, 
and copiers. The standards 
and logos are uniform among 
participating nations.
 IPv6 Ready Logo 
The protocol stack included 
in this machine has obtained 
the IPv6 Ready Logo Phase-1 
established by the IPv6 Forum.
 
						

							English
11
 Preface 
1
 WEEE  Directive 
   
 European Union (and EEA) only. 
  
 These symbols indicate that this product is not to be 
disposed of with your household waste, according to 
the WEEE Directive (2002/96/EC), the Battery Directive 
(2006/66/EC) and/or your national laws implementing 
those Directives.  
 If a chemical symbol is printed beneath the symbol shown 
above, in accordance with the Directive, this indicates 
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb 
= Lead) is present in this battery or accumulator at a 
concentration above an applicable threshold specifi
 ed in 
the Battery Directive. 
 This product should be handed over to a designated 
collection point, e.g., on an authorized one-for-one basis 
when you buy a new similar product or to an authorized 
collection site for recycling waste electrical and electronic 
equipment (EEE) and batteries and accumulators. 
Improper handling of this type of waste could have 
a possible impact on the environment and human 
health due to potentially hazardous substances that are 
generally associated with EEE.  
 Your cooperation in the correct disposal of this product 
will contribute to the eff   ective usage of natural resources.  
 For more information about the recycling of this product, 
please contact your local city offi   ce, waste authority, 
approved scheme or your household waste disposal 
service or visit www.canon-europe.com/environment. 
 (EEA: Norway, Iceland and Liechtenstein) 
 R & TTE Directive 
This equipment (None/None) 
conforms with the essential 
requirements of EC Directive 1999/5/
EC and is usable in EU. (Only for 
models with facsimile functionality.)
(For Europe Only)
Canon Inc./Canon Europa N. V.
 Information Security Standard 
(IEEE 2600) 
 This machine is compliant with IEEE Std 2600™ - 2008 
(hereinafter referred to as IEEE 2600), a global information 
security standard for multifunction peripherals and 
printers, and is able to achieve the security requirements 
defi ned in IEEE 2600.* 
 For information on how this machine meets the security 
requirements defi  ned in IEEE 2600, see e-Manual > 
Security > IEEE 2600 Security Standard. 
*   IEEE 2600.1 CC Authentication has not been obtained for 
this machine by itself. 
 Copyright 
 Copyright 2012 by Canon Inc. All rights reserved. 
 No part of this publication may be reproduced or 
transmitted in any form or by any means, electronic or 
mechanical, including photocopying and recording, or by 
any information storage or retrieval system without the 
prior written permission of Canon Inc. 
 This product includes software and/or software modules 
that are licensed by Canon Inc. or its licensors from third 
parties. Use and distribution of this software and/or 
software modules are subject to conditions (a) through 
(d) below.   (a) 
 Copyright (C) 1999, 2000, 2002 Aladdin Enterprises. All 
rights reserved. 
    (b) 
 UFST: Copyright © 1989 - 1996, 1997, 2003, 2004, 2008, all 
rights reserved, by Monotype Imaging Inc. 
    (c) 
 Copyright © Unpublished Work of Novell, Inc. All Rights 
Reserved. 
    (d) 
 Portions of this software are copyright © 2007 The 
FreeType Project (www.freetype.org). All rights reserved. 
 Third Party Software 
 This product includes third-party software modules. 
 Use and distribution of this software modules, including 
any updates of such software modules (collectively, the 
“SOFTWARE”) are subject to conditions (1) through (9) 
below. 
  
 (1)  You agree that you will comply with any applicable 
export control laws, restrictions or regulations of 
the countries involved in the event that this product 
including the SOFTWARE is shipped, transferred or 
exported into any country. 
 (2)  Rights holders of the SOFTWARE retain in all respects  the title, ownership and intellectual property rights in 
and to the SOFTWARE. Except as expressly provided 
herein, no license or right, expressed or implied, is 
hereby conveyed or granted by rights holders of the 
SOFTWARE to you for any intellectual property of 
rights holders of the SOFTWARE. 
 (3)  You may use the SOFTWARE solely for use with the  Canon product you purchased (the “PRODUCT”). 
 (4)  You may not assign, sublicense, market, distribute,  or transfer the SOFTWARE to any third party without 
prior written consent of rights holders of the 
SOFTWARE. 
 (5)  Notwithstanding the foregoing, you may transfer the  SOFTWARE only when (a) you assign all of your rights 
to the PRODUCT and all rights and obligations under 
the conditions to transferee and (b) such transferee 
agrees to be bound by all these conditions. 
 (6)  You may not decompile, reverse engineer,  disassemble or otherwise reduce the code of the 
SOFTWARE to human readable form. 
 (7)  You may not modify, adapt, translate, rent, lease or  loan the SOFTWARE or create derivative works based 
on the SOFTWARE. 
 (8)  You are not entitled to remove or make separate  copies of the SOFTWARE from the PRODUCT. 
 (9)  The human-readable portion (the source code) of the  SOFTWARE is not licensed to you. 
 Notwithstanding (1) through (9) above, in case the other 
conditions accompany third-party software modules, 
these software modules are subject to the other 
conditions.  
 
						

							12  Preface 1
 The Software Subjected to the 
Other Conditions 
 Please refer to eManual on a CD-ROM bundled with 
this product, for more detail and corresponding license 
conditions. 
 If you need source code of certain Software, under 
respective Licenses, used for this product, please send 
email in English or Japanese at: 
  
 Please refer to eManual on a CD-ROM bundled with 
this product, for more detail and corresponding license 
conditions. 
 Disclaimers 
 The information in this document is subject to change 
without notice. 
 CANON INC. MAKES NO WARRANTY OF ANY KIND 
WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR 
IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING 
WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO 
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE OR USE, OR NON-INFRINGEMENT. 
CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY 
NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE 
USE OF THIS MATERIAL.  
 Legal Limitations on the Usage 
of Your Product and the Use of 
Images 
 Using your product to scan, print or otherwise reproduce 
certain documents, and the use of such images as 
scanned, printed or otherwise reproduced by your 
product, may be prohibited by law and may result in 
criminal and/or civil liability. A non-exhaustive list of 
these documents is set forth below. This list is intended to 
be a guide only. If you are uncertain about the legality of 
using your product to scan, print or otherwise reproduce 
any particular document, and/or of the use of the images 
scanned, printed or otherwise reproduced, you should 
consult in advance with your legal advisor for guidance. 
•  Paper  Money •  Travelers  Checks •  Money  Orders •  Food  Stamps •  Certifi cates of Deposit •  Passports •  Postage Stamps (cancelled or uncancelled) •  Immigration  Papers •  Identifying Badges or Insignias •  Internal Revenue Stamps (cancelled or uncancelled) •  Selective Service or Draft Papers •  Bonds or Other Certifi  cates of Indebtedness •  Checks or Drafts Issued by Governmental Agencies •  Stock  Certifi cates •  Motor Vehicle Licenses and Certifi  cates of Title •  Copyrighted Works/Works of Art without Permission of 
Copyright Owner 
 
Ù To Avoid Unauthorized Use of the 
Machine 
 Unauthorized copies can be prevented by using 
the key switch unit to manage the operation of the 
imageRUNNER ADVANCE C9280 PRO/C7280i/C7270i/
C7260i. The use of this key should be strictly supervised to 
help prevent unauthorized copying. 
 
*
 
*  Security Key  When using the machine, insert the security key into the key switch 
unit, and then turn it to the right. 
 Super  G3 
Super G3 is a phrase used to 
describe the new generation 
of fax machines that use 
ITU-T V.34 standard 33.6 
Kbps* modems. Super G3 
High Speed Fax machines 
allow transmission times of 
approximately 3 seconds* per 
page which results in reduced 
telephone line charges.
*  Approximately 3 seconds 
per page fax transmission 
time based on CCITT/
ITU-T No.1 Chart, (JBIG, 
Standard Mode) at 33.6 
Kbps modem speed. The 
Public Switched Telephone 
Network (PSTN) currently 
supports 28.8 Kbps 
modem speeds or slower, 
depending on telephone 
line conditions.
 /05& 
 The fax function is available only if the FAX Board is 
installed. 
 
						

							English
13
 Preface 
1
   Important  Safety  Instructions 
 Please read these “Important Safety Instructions” 
thoroughly before operating the machine. As these 
instructions are intended to prevent injury to the user 
or other persons or destruction of property, always pay 
attention to these instructions. Also, since it may result 
in unexpected accidents or injuries, do not perform any 
operation unless otherwise specifi  ed in the manual. 
Improper operation or use of this machine could result 
in personal injury and/or damage requiring extensive 
repair that may not be covered under your Limited 
Warranty. 
 Installation 
  •  Never block the ventilation slots and louvers on the 
machine. These openings are provided for proper 
ventilation of working parts inside the machine. 
Blocking these openings can cause the machine to 
overheat. Never place the machine on a soft surface, 
such as a sofa or rug. 
•  Do not install the machine in the following 
locations: 
-  A damp or dusty location -  A location near water faucets or water -  A location exposed to direct sunlight -  A location subject to high temperatures -  A location near open fl  ames •  Do not install the machine near alcohol, paint 
thinner, or other fl  ammable substances. If 
fl   ammable substances come into contact with 
electrical parts inside the machine, it may result in a 
fi   re or electrical shock. 
•  Do not place the following items on the machine. If 
these items come into contact with a high-voltage 
area inside the machine, it may result in a fi  re or 
electrical shock. If these items are dropped or 
spilled inside the machine, immediately turn OFF 
the main power switch, and disconnect the power 
cord from the power outlet. Then, contact your local 
authorized Canon dealer. 
-  Necklaces and other metal objects -  Cups, vases, fl   owerpots, and other containers fi  lled 
with water or liquids 
 
(     )
 
  •  Do not install the machine in unstable locations, 
such as unsteady platforms or inclined fl   oors, or in 
locations subject to excessive vibrations, as this may 
cause the machine to fall or tip over, resulting in 
personal injury. 
•  Do not remove the machine’s leveling feet after the 
machine has been installed, as this may cause the 
machine to fall or tip over, resulting in personal 
injury. 
   
 Power  Supply 
  •  Do not damage or modify the power cord. Also, 
do not place heavy objects on the power cord, or 
pull on or excessively bend it, as this could cause 
electrical damage and result in a fi
  re or electrical 
shock. 
•  Keep the power cord away from a heat source; 
failure to do this may cause the power cord coating 
to melt, resulting in a fi   re or electrical shock. 
•  Do not connect or disconnect the power cord with 
wet hands, as this may result in electrical shock. 
•  Do not connect the power cord to a multiplug power 
strip, as this may cause a fi   re or electrical shock. 
•  Do not bundle up or tie the power cord in a knot, as 
this may result in a fi  re or electrical shock. 
•  Insert the power plug completely into the power 
outlet, as failure to do so may result in a fi  re or 
electrical shock. 
•  Do not use power cords other than the power cord 
provided, as this may result in a fi   re or electrical 
shock. 
•  As a general rule, do not use extension cords. Using 
an extension cord may result in a fi   re or electrical 
shock. 
•  Do not use power supplies with voltages other than 
those specifi   ed herein, as this may result in a fi  re or 
electrical shock. 
•  Always grasp the power plug when disconnecting 
the power cord. Pulling on the power cord may 
expose or snap the core wire, or otherwise damage 
the power cord. If the power cord is damaged, this 
could cause current to leak, resulting in a fi  re or 
electrical shock. 
 
						

							14  Preface 1
 *.1035/5  Leave  suffi    cient space around the power plug so that it 
can be unplugged easily. If objects are placed around 
the power plug, you will be unable to unplug it in an 
emergency. 
 Handling 
  •  Do not attempt to disassemble or modify the 
machine. There are high-temperature and high-
voltage components inside the machine which may 
result in a fi   re or electrical shock. 
•  If the machine makes strange noises, or gives off   
smoke, heat, or strange smells, immediately turn 
OFF the main power switch, and disconnect the 
power cord from the power outlet. Then, contact 
your local authorized Canon dealer. Continued use 
of the machine in this condition may result in a fi  re 
or electrical shock. 
•  Do not use highly fl  ammable sprays near the 
machine. If gas from these sprays comes into 
contact with the electrical components inside the 
machine, it may result in a fi   re or electrical shock. 
•  To avoid damage to the power cord and creating a 
fi  re hazard, always turn OFF the main power switch, 
and unplug the interface cable when moving the 
machine. Otherwise, the power cord or interface 
cable may be damaged, resulting in a fi  re or 
electrical shock. 
•  Make sure that the power plug is fi  rmly inserted 
into the power outlet if the machine was moved. Do 
not use the machine while the connection is loose, 
as doing so may cause a fi  re. 
•  Do not drop paper clips, staples, or other metal 
objects inside the machine. Also, do not spill water, 
liquids, or fl  ammable substances (alcohol, benzene, 
paint thinner, etc.) inside the machine. If these items 
come into contact with a high-voltage area inside 
the machine, it may result in a fi   re or electrical 
shock. If these items are dropped or spilled inside 
the machine, immediately turn OFF the main power 
switch, and disconnect the power cord from the 
power outlet. Then, contact your local authorized 
Canon dealer. 
•  Do not use this product for uses other than as a 
colour digital multitasking machine. 
  •  Do not place heavy objects on the machine, as they 
may tip over or fall resulting in personal injury. 
•  Close the feeder/platen cover gently to avoid 
catching your hands, as this may result in personal 
injury. 
   
•  Do not press down hard on the feeder/platen cover 
when using the platen glass to make copies of thick 
books. Doing so may damage the platen glass and 
result in personal injury.  
•  Do not touch the fi
  nisher while the machine is 
printing, as this may result in personal injury. 
•  Paper that has just been output from the machine 
may be hot. Be careful when removing or aligning 
paper from the output tray. Touching paper right 
after it is output may result in low-temperature 
burns. 
•  Do not place your hands, hair, clothing, etc., near 
the exit and feed rollers. Even if the machine is not 
in operation, your hands, hair, or clothing may get 
caught in the rollers, which may result in personal 
injury or damage if the machine suddenly starts 
printing. 
•  Do not place your hands in the part of the tray 
where stapling is performed (near the rollers) when 
a fi   nisher is attached, as this may result in personal 
injury. 
   
Staple Finisher-K1/Booklet 
Finisher-K1 Staple Finisher-L1/Booklet 
Finisher-L1
 
						

							English
15
 Preface 
1
•  The laser beam can be harmful to human bodies. 
Since radiation emitted inside the product is 
completely confi   ned within protective housings and 
external covers, the laser beam cannot escape from 
the machine during any phase of user operation. 
Read the following remarks and instructions for 
safety. 
-  Never open covers other than those instructed in 
the manuals for this machine. 
-  Do not remove the following caution label which 
is attached to the machine. If the label has been 
removed, contact your local authorized Canon 
dealer. 
   
-    If the laser beam escapes from the machine, 
exposure may cause serious damage to your eyes. 
-  Controlling, adjusting, or operating the machine 
in ways not mentioned in the manuals for this 
machine may cause dangerous radiation to escape 
from the machine. 
 *.1035/5 
 Press  for safety when the machine will not be used 
for a long period of time, such as overnight. Also, turn 
OFF the main power switch, and disconnect the power 
cord for safety when the machine will not be used for 
an extended period of time, such as during consecutive 
holidays. 
 Maintenance and Inspections 
  •  When cleaning the machine, fi  rst turn OFF the main 
power switch, then disconnect the power cord. 
Failure to observe these steps may result in a fi  re or 
electrical shock. 
•  Disconnect the power cord from the power outlet 
regularly, and clean the area around the base of 
the power plug’s metal pins and the power outlet 
with a dry cloth to ensure that all dust and grime is 
removed. If the power cord is connected for a long 
period of time in a damp, dusty, or smoky location, 
dust can build up around the power plug and 
become damp. This may cause a short circuit and 
result in a fi  re. 
•  Clean the machine using a slightly dampened cloth 
with a mild detergent mixed with water. Do not use 
alcohol, benzene, paint thinner, or other fl  ammable 
substances. Check detergent for fl  ammability prior 
to use. If fl   ammable substances come into contact 
with a high-voltage area inside the machine, it may 
result in a fi   re or electrical shock. 
•  There are some areas inside the machine which are 
subject to high-voltages. When removing jammed 
paper or when inspecting the inside of the machine, 
do not allow necklaces, bracelets, or other metal 
objects to touch the inside of the machine, as this 
may result in burns or electrical shock. 
•  Do not burn or throw used toner cartridges into 
open fl  ames, as this may cause the toner remaining 
inside the cartridges to ignite, resulting in burns or 
a fi  re. 
•  Make sure that the power plug is fi  rmly inserted 
into the power outlet after cleaning the machine. 
Do not use the machine while the connection is 
loose, as doing so may cause a fi  re. 
•  Check the power cord and power plug regularly. If 
the following conditions occur, contact your local 
authorized Canon dealer, as the condition may 
cause a fi re:  
-  There are burn marks on the power plug. -  The blade on the power plug is deformed or 
broken. 
-  The power goes OFF and ON when the power cord 
is bent. 
-  There are cuts, cracks, or indentations on the 
power cord. 
-  A part of the power cord becomes hot. •  Check the power cord and power plug regularly 
to make sure that they are not handled in the 
following manner, as this may result in a fi  re or 
electrical shock: 
-  The connection part of the power plug is loose. -  Stress is being applied to the power cord by a 
heavy object or by affi    xing it with staples. 
-  The power plug is loose. -  The power cord is tied in a bundle. -  The power cord protrudes into a walkway. -  The power cord is in front of a heater. 
 
						

							16  Preface 1
  •  The  fi  xing unit and its surroundings inside the 
machine may become hot during use. When 
removing jammed paper or when inspecting the 
inside of the machine, do not touch the fi  xing unit 
and its surroundings, as doing so may result in 
burns or electrical shock. 
•  When removing jammed paper or when inspecting 
the inside of the machine, do not expose yourself 
to the heat emitted from the fi   xing unit and its 
surroundings for a prolonged period of time. Doing 
so may result in low temperature burns, even 
though you did not touch the fi   xing unit and its 
surroundings directly. 
•  If a paper jam occurs, follow the directions on the 
touch panel display to remove any jammed paper 
from inside the machine. Do not insert your fi  ngers 
into any parts not indicated on the touch panel 
display, as doing so may result in personal injury or 
burns. 
   
•  When removing jammed paper or replacing the 
toner cartridge, take care not to allow the toner to 
come into contact with your hands or clothing, as 
this will dirty your hands or clothing. If they become 
dirty, wash them immediately with cold water. 
Washing them with warm water will set the toner, 
and make it impossible to remove the toner stains. 
•  When removing paper which has become jammed 
inside the machine, remove the jammed paper 
gently to prevent the toner on the paper from 
scattering and getting into your eyes or mouth. If 
the toner gets into your eyes or mouth, wash them 
immediately with cold water and immediately 
consult a physician. 
•  When removing jammed originals or paper which 
has become jammed inside the machine, take 
care not to cut your hands or injure yourself on 
the edges of the originals or paper. If you cannot 
remove the paper, contact your local authorized 
Canon dealer. 
•  When removing a used toner cartridge, remove 
the cartridge carefully to prevent the toner from 
scattering and getting into your eyes or mouth. If 
the toner gets into your eyes or mouth, wash them 
immediately with cold water and immediately 
consult a physician. 
•  Do not dismantle the toner cartridge, as doing so 
may cause toner to fl
  y out and enter your eyes or 
mouth. If toner gets into your eyes or mouth, wash 
them immediately with cold water and immediately 
consult a physician. 
•  If toner escapes from the toner cartridge, make sure 
not to ingest the toner or allow it to directly touch 
your skin. If toner touches your skin, wash it away 
with soap and water. If your skin still feels irritated 
after washing it, or you ingest toner, consult a 
doctor immediately. 
 Consumables 
  •  Do not burn or throw used toner cartridges into 
open fl   ames, as this may cause the toner remaining 
inside the cartridges to ignite, resulting in burns or 
a fi  re. 
•  Do not store toner cartridges or copy paper in 
places exposed to open fl   ames, as this may cause 
the toner or paper to ignite, resulting in burns or a 
fi  re. 
•  If you accidentally spill or scatter toner, carefully 
gather the toner particles together or wipe them 
up with a soft, damp cloth in a way that prevents 
inhalation. Never use a vacuum cleaner that does 
not have safeguards against dust explosions 
to clean up spilled toner. Doing so may cause a 
malfunction in the vacuum cleaner, or result in a 
dust explosion due to static discharge. 
  •  Keep toner and other consumables out of the 
reach of small children. If these items are ingested, 
consult a physician immediately. 
•  Do not dismantle the toner cartridge, as doing so 
may cause toner to fl   y out and enter your eyes or 
mouth. 
•  If toner gets into your eyes or mouth, wash them 
immediately with cold water and immediately 
consult a physician. 
•  If toner escapes from the toner cartridge, make sure 
not to ingest the toner or allow it to directly touch 
your skin. If toner touches your skin, wash it away 
with soap and water. If your skin still feels irritated 
after washing it, or you ingest toner, consult a 
doctor immediately. 
•  When discarding used toner cartridges, put the 
cartridges into a bag to prevent the toner remaining 
inside the cartridges from scattering, and dispose of 
them in a location away from open fl  ames. 
 Other  Warnings 
   For cardiac pacemaker users: 
 This product emits low level magnetic fl   ux. If you use 
a cardiac pacemaker and feel abnormalities, please 
move away from the product and consult your doctor. 
 
						

							English
17
 Preface 
1
   Installation  Location  and  Handling 
 This section describes precautions for installation 
location and handling. We recommend that you read 
this section prior to using this machine. 
 Installation  Precautions 
 
Ù Avoid Installing the Machine in the 
Following Locations 
•  Avoid locations subject to temperature and 
humidity extremes, whether low or high. 
 For example, avoid installing the machine near water 
faucets, hot water heaters, humidifi  ers, air conditioners, 
heaters, or stoves. 
   
•  Avoid installing the machine in direct sunlight.  If this is unavoidable, use curtains to shade the 
machine. Be sure that the curtains do not block the 
machine’s ventilation slots or louvers, or interfere with 
the electrical cord or power supply. 
 
 
•  Avoid poorly ventilated locations.  This machine generates a slight amount of ozone 
etc. during normal use. Although sensitivity to ozone 
etc. may vary, this amount is not harmful. Ozone etc. 
may be more noticeable during extended use or long 
production runs, especially in poorly ventilated rooms. 
It is recommended that the room be appropriately 
ventilated, suffi
    cient to maintain a comfortable working 
environment, in areas of machine operation. 
   
•  Avoid locations where a considerable amount 
of dust accumulates. 
•  Avoid locations where ammonia gas is emitted. 
   
•  Avoid locations near volatile or fl
 ammable 
materials, such as alcohol or paint thinner. 
•  Avoid locations that are subject to vibration.  For example, avoid installing the machine on unstable 
fl oors or stands. 
   
•  Avoid exposing the machine to rapid changes 
in temperature. 
 If the room in which the machine is installed is cold 
but rapidly heated, water droplets (condensation) may 
form inside the machine. This may result in a noticeable 
degradation in the quality of the copied image, the 
inability to properly scan an original, or the copies 
having no printed image at all. 
 
 
•  Avoid installing the machine near computers 
or other precision electronic equipment. 
 Electrical interference and vibrations generated by 
the machine during printing can adversely aff
 ect the 
operation of such equipment. 
•  Avoid installing the machine near televisions, 
radios, or similar electronic equipment. 
 The machine might interfere with sound and picture 
signal reception. 
 Insert the power plug into a dedicated power outlet, 
and maintain as much space as possible between the 
machine and other electronic equipment. 
 
						

							18  Preface 1
•  Contact an authorized Canon dealer if 
communication is unavailable. 
 Depending on your locale or your telephone 
connection, you may be unable to perform data 
communication. In this case, contact your local 
authorized Canon dealer. 
•  Do not remove the machine’s leveling feet.  Do not remove the machine’s leveling feet after the 
machine has been installed. 
 If you put weight on the front of the machine while 
the drawers or units within the machine are pulled 
out, the machine may fall forward. To prevent this from 
happening, make sure that the machine’s leveling feet 
are in place. 
 
Ù Select a Safe Power Supply 
•   Plug the imageRUNNER ADVANCE C9280 PRO/
C7280i/C7270i into an outlet that is 220 to 240 
V AC 15 A or greater. Plug the imageRUNNER 
ADVANCE C7260i into au outlet that is 220 to 
240 V AC 10 A or greater.  
•  Make sure that the power supply for the 
machine is safe, and has a steady voltage. 
•  Do not connect other electrical equipment to 
the same power outlet to which the machine is 
connected. 
•  Do not connect the power cord to a multiplug 
power strip, as this may cause a fi  re or 
electrical shock. 
•  The power cord may become damaged if it is 
stepped on, affi     xed with staples, or if heavy 
objects are placed on it. Continued use of a 
damaged power cord can lead to an accident, 
such as a fi   re or electrical shock. 
   
•  The power cord should not be taut, as this 
may lead to a loose connection and cause 
overheating, which could result in a fi
 re. 
•  If excessive stress is applied to the connection 
part of the power cord, it may damage the 
power cord or the wires inside the machine 
may disconnect. This could result in a fi  re. 
Avoid the following situations:  - 
 Connecting and disconnecting the power cord 
frequently. 
-  Tripping over the power cord. -  The power cord is bent near the connection part, and 
continuous stress is being applied to the power outlet 
or the connection part. 
-  Applying excessive force on the power plug. 
 
Ù Moving the Machine 
•  If you intend to move the machine, even to a 
location on the same fl   oor of your building, 
contact your local authorized Canon dealer 
beforehand. Do not attempt to move the 
machine yourself. 
   
 
Ù Provide Adequate Installation Space 
 Provide enough space on each side of the machine for 
unrestricted operation. 
  The following measures are for the imageRUNNER 
ADVANCE C9280 PRO. 
•  When the Copy Tray-P1 and Duplex Color 
Image Reader Unit-F1 are attached: 
 1,759 mm 1,644 mm
100 mm or more* 1
1,524 mm  
 *1 Make sure to provide at least 800 mm of space if you install one or 
more of the following: Paper Folding Unit-G1, Professional Puncher-C1, 
Document Insertion Unit-H1, or Multi-drawer Paper Deck-A1. 
•  When the Booklet Finisher-K1, Paper Folding 
Unit-G1, Professional Puncher Integration 
Unit-B1, Professional Puncher-C1, Document 
Insertion Unit-H1, Buff
  er Pass Unit-J1, Duplex 
Color Image Reader Unit-F1, and Multi-drawer 
Paper Deck-A1 are attached: 
 
800 mm or more* 2
3,977 mm
1,524 mm
 
 *2 Make sure to provide at least 100 mm of space if none of the Paper 
Folding Unit-G1, Professional Puncher-C1, Document Insertion Unit-J1, or 
Multi-drawer Paper Deck-A1 is installed.