Kyocera FS 3040MFP User Manual

							8
8-133
Default Setting (System Menu)
Protocol Detail
Make other network related settings. Item Description D efault SettingRestarting the 
System*
NetBEUI Selects whether or not to  receive documents using 
NetBEUI. On
×
LPD Select whether or not to 
receive documents using 
LPD as the network 
protocol. On
z
FTP (Server) Select  whether or not to 
receive documents using 
FTP. On
z
FTP (Client) Select whether or not to  send documents using FTP, 
and the number of the port 
to be used. On
Port number: 21
×
Raw Port Select whether or not to  receive documents using 
Raw Port. On
z
LDAP Select whether or not to use 
LDAP. Off
×
SNMP Select whether or not to 
communicate using SNMP. On
z
SNMPv3 Set SNMPv3. Offz
SMB Select whether or not to 
send documents using 
SMB. On
×
SMTP 
(E-mail TX) Select whether or not to 
send 
e-mail  using SMTP. Off
×
POP3 
(E-mail RX) Select whether or not to 
receive 
e-mail using POP3. Off
×
HTTP Select whether or not to 
communicate using HTTP. On
z
HTTPS Select whether or not to 
communicate using HTTPS.
SSL must be set to  [On] in 
SSL Setting on page 8-137 .On
z
IPP Select whether or not to use 
IPP, and the number of the 
port to be used. Off
Port number: 
631
z
Downloaded From ManualsPrinter.com Manuals 
						

							8-134
Default Setting (System Menu)
Use the procedure below.
1In the Sys. Menu/Count. menu, press the U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [TCP/IP Settings].
6Press the OK  key. The TCP/IP Settings menu appears.
7Press the U or V key to select [Protocol Detail].
IPP over SSL Select whether or not to use 
IPP over SSL.
SSL must be set to [On] in 
SSL Setting on page 8-137 .On
z
*z: The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Item Description D efault SettingRestarting the 
System*
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:L  b 
*******************
Login Password:
[ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level[ Exit ]
1  Network Setting
Network Setting:a  b 
*********************
2  NetWare
3  AppleTalk[ Exit ]
1  TCP/IP Settings
TCP/IP Settings:a  b 
2  IPv4 Setting
3  IPv6 Setting
*********************
[ Exit ]
4  Protocol Detail
Downloaded From ManualsPrinter.com Manuals 
						

							8
8-135
Default Setting (System Menu)
8Press the OK key. The Protocol Detail menu appears.
9Press the U or V key to select the item for which you 
want to make settings.
10Press the OK  key. This displays the setting screen for 
the item selected in step 9.
The screen shown is the one when [FTP(Client)] is 
selected.
11Press the U  or V key to select [On] or [Off].
If you select [On] for each  of [FTP(Client)] and [IPP] and 
press the  OK key, a port number entry screen appears.
Press the  U or  V key or the numeric keys to set the port 
number.
12Press the OK  key. Completed.  is displayed and the 
screen returns to the Protocol Detail menu.
Protocol Detail:a  b 
*********************
2  SNMPv3
3  FTP(Server)
[ Exit ]
1  NetBEUI
FTP(Client):a  b 
*********************
2  On
1 *Off
Port Number:D  b 
(1 - 65535)
      *******21*
Downloaded From ManualsPrinter.com Manuals 
						

							8-136
Default Setting (System Menu)
Network Security
The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• IPSec Setting …8-136
• SSL Setting …8-137
• SNMPv3 Setting …8-142
IPSec Setting
Make this setting when you use  IPSec. The default setting is On and that of Rule Setting is also  Off.
Use the procedure below to make the setting.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [IPSec].
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:L  b 
*******************
Login Password:
[ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level[ Exit ]
1  Network Setting
Network Setting:a  b 
4  WSD-SCAN
5  WSD-PRINT
*********************
[ Exit ]
6  IPSec
Downloaded From ManualsPrinter.com Manuals 
						

							8
8-137
Default Setting (System Menu)
6Press the OK key. IPSec appears.
7Press the U or V key to select [On] or [Off].
If you select [On] and press the  OK key, Rule Setting 
appears. Press the  U or  V key to select [On] or [Off].
8Press the OK  key. Completed.  is displayed and the 
screen returns to the Network Setting menu.
SSL Setting
This allows you to use SSL network secu rity for communication. You can use SSL Setup to select whether or not SSL 
is used and to specify the IPP port and HTTP port security settings.
SSL
Make this setting Make th is setting when you use SSL . The default setting is Off.
Use the procedure below to make the setting.
 
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
IPSec:a  b 
*********************
2  On
1 *Off
Rule Setting:a  b 
*********************
2  On
1 *Off
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:L  b 
*******************
Login Password:
[ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level[ Exit ]
1  Network Setting
Downloaded From ManualsPrinter.com Manuals 
						

							8-138
Default Setting (System Menu)
4Press the OK key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK  key. Secure Protocol appears.
7Press the U or V key to select [SSL].
8Press the OK  key. SSL appears.
9Press the U or V key to select [On] or [Off].
10Press the OK  key. Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
IPP Security
Specify the protocol to be used  for IPP. The default setting is IPP/IPP over SSL.
Use the procedure below to make the setting.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
Network Setting:a  b 
*********************
8  Host Name
9  LAN Interface
[ Exit ]
7  Secure Protocol
Secure Protocol:a  b 
*********************
2  IPP Security
3  HTTP Security[ Exit ]
1  SSL
SSL:a  b 
*********************
2  On
[ Exit ]
1 *Off
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:L  b 
*******************
Login Password:
[ Login ]
Downloaded From ManualsPrinter.com Manuals 
						

							8
8-139
Default Setting (System Menu)
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK  key. Secure Protocol appears.
7Press the U or V key to select [IPP Security].
8Press the OK  key. IPP Security appears.
9Press the U or V key to select [IPP/IPP over SSL] or 
[IPPoverSSL only].
10Press the OK  key. Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
HTTP Security
Specify the protocol to be used for HTTP. The default setting is  HTTPS only.
Use the procedure below to make the setting.
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
System:a  b 
*********************
2  I/F Block Set.
3  Security Level
[ Exit ]
1  Network Setting
Network Setting:a  b 
*********************
8  Host Name
9  LAN Interface[ Exit ]
7  Secure Protocol
Secure Protocol:a  b 
1  SSL
*********************
3  HTTP Security[ Exit ]
2  IPP Security
IPP Security:a  b 
1  IPP/IPP over SSL
*********************2 *IPPoverSSL only
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Downloaded From ManualsPrinter.com Manuals 
						

							8-140
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK  key. Secure Protocol appears.
7Press the U or V key to select [HTTP Security]. 
8Press the OK  key. HTTP Security appears.
9Press the U or V key to select [HTTP/HTTPS] or 
[HTTPS only].
10Press the OK  key. Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
Login User Name:L  b 
*******************
Login Password:
[ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level[ Exit ]
1  Network Setting
Network Setting:a  b 
*********************
8  Host Name
9  LAN Interface[ Exit ]
7  Secure Protocol
Secure Protocol:a  b 
1  SSL
2  IPP Security
*********************
[ Exit ]
3  HTTP Security
HTTP Security:a  b 
1  HTTP/HTTPS
*********************2 *HTTPS only
Downloaded From ManualsPrinter.com Manuals 
						

							8
8-141
Default Setting (System Menu)
LDAP Security
Specify the protocol to be used for LDAP. The default setting is  Off.
Use the procedure below to make the setting. 
1In the Sys. Menu/Count. menu, press the  U or V  key to 
select [System], and press the  OK key.
A login screen will appear. Then , enter the user ID and 
password with administrator  privileges to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK  key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK  key. Secure Protocol appears.
7Press the U or V key to select [LDAP Security].
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:L  b 
*******************
Login Password:
[ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level[ Exit ]
1  Network Setting
Network Setting:a  b 
*********************
8  Host Name
9  LAN Interface[ Exit ]
7  Secure Protocol
Secure Protocol:a  b 
2  IPP Security
3  HTTP Security
*********************
[ Exit ]
4  LDAP Security
Downloaded From ManualsPrinter.com Manuals 
						

							8-142
Default Setting (System Menu)
8Press the OK key. LDAP Security appears.
9Press the U or V key to select [Off], [LDAPv3/TLS] or 
[LDAP over SSL].
10Press the OK  key. Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
SNMPv3 Setting
Sets up SNMPv3. The default setting is  Off. Use the procedure below.
Refer to Protocol Detail on page 8-133  about the procedures.
LDAP Security:a  b 
*********************
2  LDAPv3/TLS
3  LDAP over SSL
1 *Off
Downloaded From ManualsPrinter.com Manuals