Kyocera FS 3040MFP User Manual
Have a look at the manual Kyocera FS 3040MFP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 73 Kyocera manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 307
8
8-119
Default Setting (System Menu)
3Press the U or V key to select [Network Setting].
4Press the OK key. The Network Setting menu appears.
5Press the U or V key to select [TCP/IP Settings].
6Press the OK key. The TCP/IP Settings menu appears.
7Press the U or V key to select [TCP/IP].
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10Press the U or V key to select [IPv4...](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-306.png "Page 307
8
8-119
Default Setting (System Menu)
3Press the U or V key to select [Network Setting].
4Press the OK key. The Network Setting menu appears.
5Press the U or V key to select [TCP/IP Settings].
6Press the OK key. The TCP/IP Settings menu appears.
7Press the U or V key to select [TCP/IP].
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10Press the U or V key to select [IPv4...")
![Page 308
8-120
Default Setting (System Menu)
13Press the OK key. DHCP appears.
14Press the U or V key to select [Off ] and then press the
OK key.
Completed. is displayed and the screen returns to the
IPv4 Setting menu.
15Press the U or V key to select [Bonjour].
16Press the OK key. Bonjour appears.
17Press the U or V key to select [Off ] and then press the
OK key.
Completed. is displayed and the screen returns to the
IPv4 Setting menu.
18Press the U or V key to select [IP Address].
19Press the OK...](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-307.png "Page 308
8-120
Default Setting (System Menu)
13Press the OK key. DHCP appears.
14Press the U or V key to select [Off ] and then press the
OK key.
Completed. is displayed and the screen returns to the
IPv4 Setting menu.
15Press the U or V key to select [Bonjour].
16Press the OK key. Bonjour appears.
17Press the U or V key to select [Off ] and then press the
OK key.
Completed. is displayed and the screen returns to the
IPv4 Setting menu.
18Press the U or V key to select [IP Address].
19Press the OK...")
![Page 309
8
8-121
Default Setting (System Menu)
Press the U or V key or the numeric keys to enter the
IP Address. Each 3 digits can be set between 000 and
255.
IMPORTANT: When the DHCP Setting ( page 8-123) is [On],
the current IP address is displayed and cannot be changed.
When setting an IP address, set the DHCP Setting ( page 8-
123) to Off.
21Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
22Press the U or V key to select [Subnet Mask].
23Press the OK key....](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-308.png "Page 309
8
8-121
Default Setting (System Menu)
Press the U or V key or the numeric keys to enter the
IP Address. Each 3 digits can be set between 000 and
255.
IMPORTANT: When the DHCP Setting ( page 8-123) is [On],
the current IP address is displayed and cannot be changed.
When setting an IP address, set the DHCP Setting ( page 8-
123) to Off.
21Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
22Press the U or V key to select [Subnet Mask].
23Press the OK key....")
![Page 310
8-122
Default Setting (System Menu)
27Press the OK key. Default Gateway appears.
28Use the arrow keys to enter the Default Gateway.
Press the Y or Z key to move the cursor position
horizontally.
Press the U or V key or the numeric keys to enter the
Default Gateway. Each 3 digits can be set between 000
and 255.
IMPORTANT: When the DHCP Setting ( page 8-123) is [On],
the current Default Gateway is displayed and cannot be
changed.
When setting an Default Gate way, set the DHCP Setting
(page 8-123...](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-309.png "Page 310
8-122
Default Setting (System Menu)
27Press the OK key. Default Gateway appears.
28Use the arrow keys to enter the Default Gateway.
Press the Y or Z key to move the cursor position
horizontally.
Press the U or V key or the numeric keys to enter the
Default Gateway. Each 3 digits can be set between 000
and 255.
IMPORTANT: When the DHCP Setting ( page 8-123) is [On],
the current Default Gateway is displayed and cannot be
changed.
When setting an Default Gate way, set the DHCP Setting
(page 8-123...")
![Page 311
8
8-123
Default Setting (System Menu)
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below to specify the DHCP setting.
1In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then , enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting]....](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-310.png "Page 311
8
8-123
Default Setting (System Menu)
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below to specify the DHCP setting.
1In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then , enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting]....")
![Page 312
8-124
Default Setting (System Menu)
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10Press the U or V key to select [IPv4 Setting].
11Press the OK key. The IPv4 Setting menu appears.
12Press the U or V key to select [DHCP].
13Press the OK key. DHCP appears.
14Press the U or V key to select [On] or [Off] and then
press the OK key.
Completed. is displayed and the screen...](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-311.png "Page 312
8-124
Default Setting (System Menu)
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10Press the U or V key to select [IPv4 Setting].
11Press the OK key. The IPv4 Setting menu appears.
12Press the U or V key to select [DHCP].
13Press the OK key. DHCP appears.
14Press the U or V key to select [On] or [Off] and then
press the OK key.
Completed. is displayed and the screen...")
![Page 313
8
8-125
Default Setting (System Menu)
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Use the procedure below to specify the Bonjour setting.
1In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then , enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting]....](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-312.png "Page 313
8
8-125
Default Setting (System Menu)
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Use the procedure below to specify the Bonjour setting.
1In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then , enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting]....")
![Page 314
8-126
Default Setting (System Menu)
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10Press the U or V key to select [IPv4 Setting].
11Press the OK key. The IPv4 Setting menu appears.
12Press the U or V key to select [Bonjour].
13Press the OK key. Bonjour appears.
14Press the U or V key to select [On] or [Off] and then
press the OK key.
Completed. is displayed and the...](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-313.png "Page 314
8-126
Default Setting (System Menu)
8Press the OK key. TCP/IP appears.
9Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10Press the U or V key to select [IPv4 Setting].
11Press the OK key. The IPv4 Setting menu appears.
12Press the U or V key to select [Bonjour].
13Press the OK key. Bonjour appears.
14Press the U or V key to select [On] or [Off] and then
press the OK key.
Completed. is displayed and the...")
![Page 315
8
8-127
Default Setting (System Menu)
TCP/IP (IPv6) Setup
Set up TCP/IP (IPv6) to connect to the network. The default setting is Off.
Use the procedure below to setup the TCP/IP (IPv6) setting.
1In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then , enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2The System menu appears.
3Press the U or V key to select...](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-314.png "Page 315
8
8-127
Default Setting (System Menu)
TCP/IP (IPv6) Setup
Set up TCP/IP (IPv6) to connect to the network. The default setting is Off.
Use the procedure below to setup the TCP/IP (IPv6) setting.
1In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then , enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2The System menu appears.
3Press the U or V key to select...")
![Page 316
8-128
Default Setting (System Menu)
8Press the OK key. IPv6 Setting appears.
9Press the U or V key to select [On] or [Off].
10Press the OK key. Completed. is displayed and the
screen returns to the TCP/IP Settings menu.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is Off .
Use the procedure below to setup the NetWare setting.
1In the Sys. Menu/Count. menu, press the U or...](http://img.usermanuals.tech/thumb/2828/37278/w64_Kyocera_FS-3040MFP-315.png "Page 316
8-128
Default Setting (System Menu)
8Press the OK key. IPv6 Setting appears.
9Press the U or V key to select [On] or [Off].
10Press the OK key. Completed. is displayed and the
screen returns to the TCP/IP Settings menu.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is Off .
Use the procedure below to setup the NetWare setting.
1In the Sys. Menu/Count. menu, press the U or...")
8 8-123 Default Setting (System Menu) DHCP Settings Select whether or not to use the DHCP server. The default setting is On. Use the procedure below to specify the DHCP setting. 1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. A login screen will appear. Then , enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2The System menu appears. 3Press the U or V key to select [Network Setting]. 4Press the OK key. The Network Setting menu appears. 5Press the U or V key to select [TCP/IP Settings]. 6Press the OK key. The TCP/IP Settings menu appears. 7Press the U or V key to select [TCP/IP]. Sys. Menu/Count.:a b 1 Report 2 Counter ********************* [ Exit ] 3 System Login User Name:L b ******************* Login Password: [ Login ] System:a b ********************* 2 I/F Block Set. 3 Security Level[ Exit ] 1 Network Setting Network Setting:a b ********************* 2 NetWare 3 AppleTalk[ Exit ] 1 TCP/IP Settings TCP/IP Settings:a b ********************* 2 IPv4 Setting 3 IPv6 Setting[ Exit ] 1 TCP/IP Downloaded From ManualsPrinter.com Manuals
8-124 Default Setting (System Menu) 8Press the OK key. TCP/IP appears. 9Press the U or V key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the TCP/IP Settings menu. 10Press the U or V key to select [IPv4 Setting]. 11Press the OK key. The IPv4 Setting menu appears. 12Press the U or V key to select [DHCP]. 13Press the OK key. DHCP appears. 14Press the U or V key to select [On] or [Off] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. TCP/IP:a b 1 Off *********************2 *On TCP/IP Settings:a b 1 TCP/IP ********************* 3 IPv6 Setting [ Exit ] 2 IPv4 Setting IPv4 Setting:a b ********************* 2 Bonjour 3 IP Address [ Exit ] 1 DHCP DHCP:a b 1 Off *********************2 *On Downloaded From ManualsPrinter.com Manuals
8 8-125 Default Setting (System Menu) Bonjour Settings Select whether or not to use Bonjour. The default setting is Off. Use the procedure below to specify the Bonjour setting. 1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. A login screen will appear. Then , enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2The System menu appears. 3Press the U or V key to select [Network Setting]. 4Press the OK key. The Network Setting menu appears. 5Press the U or V key to select [TCP/IP Settings]. 6Press the OK key. The TCP/IP Settings menu appears. 7Press the U or V key to select [TCP/IP]. Sys. Menu/Count.:a b 1 Report 2 Counter ********************* [ Exit ] 3 System Login User Name:L b ******************* Login Password: [ Login ] System:a b ********************* 2 I/F Block Set. 3 Security Level[ Exit ] 1 Network Setting Network Setting:a b ********************* 2 NetWare 3 AppleTalk[ Exit ] 1 TCP/IP Settings TCP/IP Settings:a b ********************* 2 IPv4 Setting 3 IPv6 Setting[ Exit ] 1 TCP/IP Downloaded From ManualsPrinter.com Manuals
8-126 Default Setting (System Menu) 8Press the OK key. TCP/IP appears. 9Press the U or V key to select [On] and then press the OK key. Completed. is displayed and the screen returns to the TCP/IP Settings menu. 10Press the U or V key to select [IPv4 Setting]. 11Press the OK key. The IPv4 Setting menu appears. 12Press the U or V key to select [Bonjour]. 13Press the OK key. Bonjour appears. 14Press the U or V key to select [On] or [Off] and then press the OK key. Completed. is displayed and the screen returns to the IPv4 Setting menu. TCP/IP:a b ********************* 2 *On 1 Off TCP/IP Settings:a b 1 TCP/IP ********************* 3 IPv6 Setting [ Exit ] 2 IPv4 Setting IPv4 Setting:a b 1 DHCP ********************* 3 IP Address [ Exit ] 2 Bonjour Bonjour:a b ********************* 2 On 1 *Off Downloaded From ManualsPrinter.com Manuals
8 8-127 Default Setting (System Menu) TCP/IP (IPv6) Setup Set up TCP/IP (IPv6) to connect to the network. The default setting is Off. Use the procedure below to setup the TCP/IP (IPv6) setting. 1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. A login screen will appear. Then , enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2The System menu appears. 3Press the U or V key to select [Network Setting]. 4Press the OK key. The Network Setting menu appears. 5Press the U or V key to select [TCP/IP Settings]. 6Press the OK key. The TCP/IP Settings menu appears. 7Press the U or V key to select [IPv6 Setting]. Sys. Menu/Count.:a b 1 Report 2 Counter ********************* [ Exit ] 3 System Login User Name:L b ******************* Login Password: [ Login ] System:a b ********************* 2 I/F Block Set. 3 Security Level[ Exit ] 1 Network Setting Network Setting:a b ********************* 2 NetWare 3 AppleTalk[ Exit ] 1 TCP/IP Settings TCP/IP Settings:a b ********************* 2 IPv4 Setting 3 IPv6 Setting[ Exit ] 1 TCP/IP Downloaded From ManualsPrinter.com Manuals
8-128 Default Setting (System Menu) 8Press the OK key. IPv6 Setting appears. 9Press the U or V key to select [On] or [Off]. 10Press the OK key. Completed. is displayed and the screen returns to the TCP/IP Settings menu. NetWare Setup Select the NetWare network connection. After that, select frame types for NetWare network from Auto, Ethernet-II, 802.3, 802.2, or SNAP. The default settings is Off . Use the procedure below to setup the NetWare setting. 1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. A login screen will appear. Then , enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2The System menu appears. 3Press the U or V key to select [Network Setting]. 4Press the OK key. The Network Setting menu appears. 5Press the U or V key to select [NetWare]. IPv6 Setting:a b ********************* 2 On [ Exit ] 1 *Off Sys. Menu/Count.:a b 1 Report 2 Counter ********************* [ Exit ] 3 System Login User Name:L b ******************* Login Password: [ Login ] System:a b ********************* 2 I/F Block Set. 3 Security Level[ Exit ] 1 Network Setting Network Setting:a b ********************* 2 NetWare 3 AppleTalk[ Exit ] 1 TCP/IP Settings Downloaded From ManualsPrinter.com Manuals
8 8-129 Default Setting (System Menu) 6Press the OK key. NetWare appears. 7Press the U or V key to select [On] or [Off]. If you select [On] and press the OK key, Frame Type appears. Press the U or V key to select the desired frame type. The available frame types are as follows: Auto 802.3 Ether-II 802.2 SNAP 8Press the OK key. Completed. is displayed and the screen returns to the Network Setting menu. For detailed information on restarting the system, refer to Restarting the System on page 8-116 . AppleTalk Setup Select the Apple Talk network connection. The default setting is On. Use the procedure below to setup the AppleTalk setting. 1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. A login screen will appear. Then , enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2The System menu appears. NetWare:a b ********************* 2 On 1 *Off Frame Type:a b ********************* 2 802.3 3 Ether-II 1 *Auto Sys. Menu/Count.:a b 1 Report 2 Counter ********************* [ Exit ] 3 System Login User Name:L b ******************* Login Password: [ Login ] System:a b ********************* 2 I/F Block Set. 3 Security Level[ Exit ] 1 Network Setting Downloaded From ManualsPrinter.com Manuals
8-130 Default Setting (System Menu) 3Press the U or V key to select [Network Setting]. 4Press the OK key. The Network Setting menu appears. 5Press the U or V key to select [AppleTalk]. 6Press the OK key. AppleTalk appears. 7Press the U or V key to select [On] or [Off] and then press the OK key. Completed. is displayed and the screen returns to the Network Setting menu. WSD Scan Setup Select whether or not to use WSD Scan. The default setting is On. Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is changed. 1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. A login screen will appear. Then , enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2The System menu appears. 3Press the U or V key to select [Network Setting]. Network Setting:a b ********************* 2 NetWare 3 AppleTalk [ Exit ] 1 TCP/IP Settings AppleTalk a b 1 Off *********************2 *On Sys. Menu/Count.:a b 1 Report 2 Counter ********************* [ Exit ] 3 System Login User Name:L b ******************* Login Password: [ Login ] System:a b ********************* 2 I/F Block Set. 3 Security Level[ Exit ] 1 Network Setting Downloaded From ManualsPrinter.com Manuals
8 8-131 Default Setting (System Menu) 4Press the OK key. The Network Setting menu appears. 5Press the U or V key to select [WSD-SCAN]. 6Press the OK key. The WSD-SCAN menu appears. 7Press the U or V key to select [On] or [Off]. 8Press the OK key. Completed. is displayed and the screen returns to the Network Settings menu. WSD Print Setup Select whether or not to use WSD Print. The default setting is On. Use the procedure below to setup the WSD-PRINT setting. The machine must be restarted after the setting is changed. 1In the Sys. Menu/Count. menu, press the U or V key to select [System], and press the OK key. A login screen will appear. Then , enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2The System menu appears. 3Press the U or V key to select [Network Setting]. Network Setting:a b ********************* 2 NetWare 3 AppleTalk [ Exit ] 1 TCP/IP Settings WSD-SCANa b 1 Off *********************2 *On Sys. Menu/Count.:a b 1 Report 2 Counter ********************* [ Exit ] 3 System Login User Name:L b ******************* Login Password: [ Login ] System:a b ********************* 2 I/F Block Set. 3 Security Level[ Exit ] 1 Network Setting Downloaded From ManualsPrinter.com Manuals
8-132 Default Setting (System Menu) 4Press the OK key. The Network Setting menu appears. 5Press the U or V key to select [WSD-PRINT]. 6Press the OK key. The WSD-PRINT menu appears. 7Press the U or V key to select [On] or [Off]. 8Press the OK key. Completed. is displayed and the screen returns to the Network Settings menu. Network Setting:a b ********************* 2 NetWare 3 AppleTalk [ Exit ] 1 TCP/IP Settings WSD-PRINT:a b 1 Off *********************2 *On Downloaded From ManualsPrinter.com Manuals