TiE Onyx 2, 3, 4, 5 Service And Programming Manual

							A- TOLL RESTRICTION
AP- ALLOW’ 
 ACCESS   
Related
Programming
l
l
Feature Reference
Instructions
Step 1 l
Step 1 
Step  l
 Estensions.  Class of    Class of Service to extensions.
E- Trunks. EJ- 
 Restriction   Toll Restriction for each
trunk.
Toll Restriction
To enter data on the PRF:
Enter 
 or N(o) for this option on Table 1.
To enter data at the programming terminal:
After programming the previous AP option, you see: 
ALLOW SPECIAL
ACCESS 
 DIALING?
Enter Y(es) or N(o) for this option. Go to Allow Outside Operator (0+)
Dialing on the next page.
 SOFTWARE CONFTGURATTON Issue 1-O 
						

							A- TOLL RESTRICTION
  OUTSIDE   
Description
Use this option to  an estension user from directly dialing  to
get an outside 
 operator. These calls can include:
 Operator assisted calls
 Credit card calls
 011 international calls
Related
Programming
If this option restricts 0+ dialing. the system terminates the call as soon as the
user dials 0.
Conditions
Even if   this option. International Dialing below may still prevent
0 11 international calls.
 
0+ dialing 
Toll Restriction
AI- Initialize Toll Restriction 
 Initialize Toll Restriction before
programming.
AP- Toll Level  Enter the Toll Level vou want to program.
 Allow Active Dial Pad   continued dialing for this Toll
Level (see Special Services and OCC Compatibility).
 Allow Special Access  11) Dialing  Enable/disable  and 
dialing for this Toll Level.
 Allow International Dialing  Enable/disable direct international dialing
for this Toll 
 This option applies only if you first enable Allow Outside
Operator 
 Allow Equal Access  Enablei’disable Equal Access Dialing for this Toll
Level (see Equal Access Compatibility). Also, program the Equal Access
Codes table.
 Allow 1 +  Dialing Enable/disable long distance exchange calls
for this Toll Level. Also. program the 1 
 NNX codes table.
 Allow  Dialing  local exchange (NNX) dialing for
this Toll Level. Also. program the NNX codes table.
 Allow  Dialing   area code (NPA) dialing for this
Toll Level. Also, program the NPA codes table,
  Digit Analysis Enable/disable six-digit analysis for this Toll Level.
Also, program a six-digit analysis table.
CP- Allow  Intercom Calls at Night   At night, extensions
with this option enabled can only place Intercom calls. This assignment
overrides AP programming.
Issue 1-O
SOFTWARE 
  
						

							A- TOLL RESTRICTION
AP- ALLOW OUTSIDE OPERATOR 
 DIALING
Related
Programming
l
l
l
Feature Reference
Instructions
Step I 
Step I 
Step  
CP-   Local Calls at Sight   At  night, extensions with
this option enabled can place Intercom calls and local outside calls. In
addition. extensions 
 this option enabled cannot place Ot calls.
CP- 
  Only Local Calls  or Sight)   Extensions with this
option enabled can 
 place  calls or local outside calls. In
addition. extensions 
 this option enabled cannot place Ot calls.
CP- Extension Toll Restriction 
   Assign a toll restriction
level (O-7) to a Class of 
E- Estensions,  Class of    Class of Service to extensions.
E- Trunks. EJ- Toll Restriction 
 Enable/&sable Toll Restriction for each
trunk.
Toll Restriction
To enter data on the PRF:
Enter 
 or N(o) for this option on Table 1.
To enter data at the programming terminal:
After programming the previous AP option, 
you see: ALLOW  DIALING?
Enter Y(es) or N(o) for this option. Go to Allow International Dialing on the
next page. 
						

							A- TOLL RESTRICTION
   
Description
Related
ProgrammingUse this option to 
 an extension user from directly  a 011
international call. If this option restricts 01 
 dialing. the system 
the call as soon  the user dials 0 
a. To allow 01  dialing. must first allow 0+ dialing in  Outside
Operator (0+) Dialing.
b. Some or all portions of 
 and Canada are included in the same
numbering plan as the United States. This is termed the North American
Numbering Plan (NANP). Mexico and Canada are served by area codes
within the NANP. To restrict these calls. use the Allow NPA Dialing
option.
Default 
01 1 dialing allowed.
Toll Restriction
AI- Initialize Toll Restriction 
 Initialize  Restriction before
programming.
AP- Toll Level 
 Enter the Toll Level  want to program.
AP- 
 Active Dial Pad   continued dialing for this Toll
Level (see Special Services and OCC Compatibility).
AP- Allow Special Access 
  Dialing  Enable/disable  and 
dialing for this Toll Level.
  Outside Operator (0+) Dialing  Enable/disable outside operator
dialing for this Toll Level.
AP- Allow Equal Access 
 Enable/disable Equal Access Dialing for this Toll
Level (see Equal Access Compatibility). Also, program the Equal Access
Codes table.
AP- Allow 1 + 
 Dialing  Enable/disable long distance exchange calls
for this Toll Level. Also, program the 1 + NNX codes table.
AP- Allow 
 Dialing  Enable/disable local exchange (NNX) dialing for
this Toll Level. Also, program the NNX codes table.
AP- Allow NPA Dialing 
 Enable/disable area code (NPA) dialing for this
Toll Level. Also, 
 the NPA codes table.
 Six Digit  Enable/disable six-digit analysis for this Toll Level.
Also, program a six-digit analysis table.
CP- Allow Only Intercom Calls at Night 
  At night, extensions
with this option enabled can only place Intercom calls. This assignment
overrides AP programming.
Issue 1-OSOFTWARE CONFIGURATION2-17 
						

							A- TOLL RESTRICTION
AP- 
 INTERNATIONAL 
Related
Programming
l
l
l
Feature Reference
Instructions
Step I l
Step  
Step 2 
CP- Allow  Local Calls at Sight   At night. extensions with
this option enabled can place Intercom calls and local outside calls. In
addition. extensions 
 this option enabled cannot place 011 international
calls.
CP- 
Allow Only Local Calls  or Night)   Extensions with this
option enabled can 
 place Intercom calls or local outside calls. In
addition, extensions 
 this option enabled cannot place 011 international
calls.
CP- Extension Toll Restriction Level   Assign a toll restriction
level (O-7) to a Class of 
E- Estensions,  Class of Service  Assign Class of Service to extensions.
E- Trunks. EJ- Toll Restriction 
 Enable/disable Toll Restriction for each
trunk.
Toll Restriction
To enter data on the PRF:
Enter Y(es) or N(o) for this option on Table 1.
To enter data at the programming terminal:
After programming the previous AP option, 
you see: ALLOW DIRECT 
DIALING?
Enter Y(es) or N(o) for this option. Go to Allow Equal Access on the next
page.
   Issue 1-O 
						

							A- TOLL RESTRICTION
 ALLOW EQUAL ACCESS
Description
Related
Programming
Use this option to   an extension user from directly diating Equal
Access 
 calls. If  the  compares the  code the
user dials to the programmed Equal Access List. The list can be either an
allow or deny list. This means the list can either selectively allow or deny the
dialed code. The system does not further Toll Restrict the call.
If this option restricts 
  the system terminates the call as soon
as the user dials 10 and any digit. If the user dials a 
 code that is not
allowed by the Equal Access List. the system terminates the call after the
code.
Conditions
None
Default Value
Equal Access Dialing allowed. The Equal Access List is an allow list with no
entries. An empty list allows all codes.
Equal Access Compatibility
CP- Extension Toll Restriction Level 
  Assign a Toll Restriction
Level to each Class of Service.
E- Extensions, 
 Class of Service  Assign Class of Service to each
extension.
Toll Restriction
AI- Initialize Toil Restriction 
 Initialize Toll Restriction before
programming.
AP- Toll Level 
 Enter the Toll Level you want to program.
AP- Allow Active Dial Pad 
 Enable/disable continued dialing for this Toll
Level (see Special Services and OCC Compatibility).
AP- Allow Special Access (N 11) Dialing 
 Enable/disable  and 
dialing for this Toll Level.
AP- Allow Outside Operator (0-c) Diaiing 
 Enable/disable outside operator
dialing for this Toll Level.
AP- Allow International Dialing 
 Enable/disable direct international dialing
for this Toll Level.
AP- Allow 1 + 
 Dialing  Enable/disable long distance exchange calls
for this Toll Level. Also. program the 1 
 NNX codes table.
AP- Allow 
 Dialing  Enable/disable local exchange (NNX) dialing for
this Toll Level. Also, program the NNX codes table.
AP- Allow NPA Dialing 
 Enable/disable area code (NPA) dialing for this
Toll Level. Also, program the NPA codes table.
 Six Digit Analysis Enable/disable six-digit analysis for this Toll Level.
Also, program a six-digit analysis table.
CP- Allow 
 Intercom Calls at Night   At night, extensions
with this option enabled can only place Intercom calls. This assignment
overrides AP programming..
Issue 1-O 
 CONFIGURATION2-19 
						

							A- TOLL RESTRICTION
AP- ALLOW EQUAL ACCESS
Related
Programming
l
Feature Reference
Instructions
Step  
Step  
Step 3 l
CP-  Only Local  Calls at Sight   At night, extensions with
this option enabled can place Intercom calls and local outside calls. In
addition. extensions 
 this option enabled cannot place Equal Access calls.
CP- Allow Only Local Calls 
 or Night)   Extensions with this
option enabled can 
 place Intercom calls or local outside calls. In
addition, extensions with this option enabled cannot place Equal Access calls.
CP- Extension Toll Restriction 
   Assign a toll restriction
level (O-7) to a Class of 
E- Extensions.  Class of Service  Assign Class of Service to extensions.
 Trunks, EJ- Toll Restriction  Enable/&able Toil Restriction for each
trunk.
Equal Access Compatibility
Toll Restriction
To enter data on the PRF:
Enter Y(es) or N(o) for this option on Table 1.
  enter  do not go to steps  and 3.
If  enter Y. indicate if the Equal Access List is a deny list or an allow list.
For example. to have Equal Access only for a  specific codes, make the list an
allow 
Enter the codes in the Equal Access List.
For example. if the list is an allow list only for 10288. enter only 288 in the list.
Issue 1-O 
						

							A- TOLL RESTRICTION
 ALLOW  ACCESS
Instructions
To enter data at the programming terminal:
Step  After programming the  AP option. you see: ALLOW EQUAL
ACCESS?
Step 2 lEnter  or N(o) for this option.If you      I  Dialing.
Step 3 Use the chart below to enter data into the list. Go to Allow  when you
complete the list.
From this  pe thisFunction
   
   to  
To  these options
 Enter code  from Table  The then asks for  next entry.
 making all your entries. press ENTER
to go back to  options forthis list.
   fromDATA Enter code  Table  The  system then asks for your next 
After making  your entries. press ENTER
to go buck to   forthis fist.
  list go to the  Toll 
Issue 1-OSOFTWARE CONFIGURATION2-21 
						

							A- TOLL RESTRICTION
AP- 
  DIALING
Description
Related
Programming
l
Use this option to   an extension user from directly 
 (1 +  calls. If  the svstem compares the 
code the user dials to the   The list can be either an
 or  list. This means the list can either selectively allow or  the
dialed code.
If this option restricts 
 dialing (or a specific l+NNX code). the system
terminates the call after the user dials the code.
Conditions
None
Default Value
 dialing  The  +NNX list is an allow list with no entries. An
empty list allows 
 codes.
Toll Restriction
AI- Initialize Toll Restriction 
 Initialize Toll Restriction before
programming.
AP- Toll Level 
 Enter the Toll Level YOU want to program.
AP- Allow Active Dial Pad 
 Enable/&sable continued dialing for this Toll
Level (see Special Services and OCC Compatibility).
 Allow Special Access   Dialing  Enable/disable  and 
dialing for this Toll Level.
 Allow Outside Operator (0+) Dialing  Enable/disable outside operator
dialing for this Toll Level.
  Allow International Dialing  Enable/disable direct international dialing
for this Toll Level.
 Allow Equal Access  Enable/disable Equal Access Dialing for this Toll
Level (see Equal Access 
 Also, program the Equal Access
Codes table.
AP- Allow 
 Dialing  Enable/disable local exchange (NNX) dialing for
this Toll Level. Also. program the NNX codes table.
 Allow NPA Dialing  Enable/disable area code (NPA) dialing for this
Toll Level. Also, program the NPA codes table.
 Six Digit   Enable/disable six-digit analysis for this Toll Level.
Also, program a six-digit analysis table.
CP- Allow 
 Intercom Calls at    At night, extensions
with this option enabled can only place Intercom calls. This assignment
overrides AP programming.
CP- Allow 
 Local Calls at    At night, extensions with
this option enabled can place Intercom calls and local outside calls. This
assignment overrides AP programming (except AP- Allow Active Dial Pad).
CP- Allow Only Local Calls 
 or Night)   Extensions with this
option enabled can only place Intercom calls or local outside calls.This
assignment overrides AP programming (except AP- Allow Active Dial Pad).
2-22 SOFTWARE 
Issue 1-O 
						

							A- TOLL RESTRICTION
AP- ALLOW  DIALING
Related
Programming
(Cont’d)
l
Feature Reference
Instructions
Step 1 
Step  
Step 3 l
Step I 
Step  
Step 3 
CP- Extension Toll Restriction    Assign a toll restriction
level 
(O-7) to a Class of Service.
E- Extensions. 
 Class of Service  Assign Class of Service to extensions.
E- Trunks, EJ- Toll Restriction 
 Enable/disable Toll Restriction for each
trunk.
Toll Restriction
To enter data on the PRF:
Enter 
 or N(o) for this option on Table 1.If  enter  do not go to steps  and 3.
If you enter Y, indicate if the  list is a deny list or an allow list.
For example. to have  dialing only for a few specific codes. make the list an
allow list.
Enter the codes in the  List.
For example. if the  is an allow list only for 888. enter only 888 in the list.
To enter data at the programming terminal:
After programming the previous AP option, 
you see: ALLOW 
DIALING?
Enter Y(es) or N(o) for this option.If you enter N. go to   dialing.
Use the chart below to enter data into the list. Go to Allow NNX Dialing
when you complete the list.
From this menu  this Function To use these ootions
  of 
Add a code  the DATA  code  from  I. The then asks for your next 
 a code fromthe 
After making all your entries, press ENTER
co go back to  options forthis 
DATA  code  from  I. Thesystem then asks for your next entry.
After making all your entries, press ENTERIO go back to A P-CMD  options forthis list.
Display the codes in
 
 this list and IO   Toll option.
Issue 1-O CONFIGURATION2-23