Ricoh Mp C3000 Service Manual

							 
SM 6-91 B230/B237/D042 
Detailed 
Descriptions 
16  4 x 4 Landscape 
25  5 x 5 Landscape 
32  8 x 4 Portrait 
36  6 x 6 Landscape 
49  7 x 7 Landscape 
64  8 x 8 Landscape 
 
The number of images printed on a page  can be as shown in the following list. 
Paper size  Number of images 
2L (5” x 7”)  2, 4, 8, 9 
Postcard 2,  4 
100mm x 150mm  2, 4 
4“ x 6” 2, 4, 8, 9 
8“ x 10” 2, 4, 8, 9, 16, 25, 32 
Letter 2, 4, 8, 9, 16, 25, 32 
11“ x 17” 2, 4, 8, 9, 16, 25, 32, 49, 64 
A3 2, 4, 8, 9, 16, 25, 32, 49, 64 
A4  2, 4, 8, 9, 16, 25, 32 
A5  2, 4, 8, 9, 16 
A6  2, 4, 8 
B4 2, 4, 8, 9, 16, 25, 32, 49 
B5  2, 4, 8, 9, 16, 25 
B6  2, 4, 8, 9 
 
ƒ  A form feed may be inserted between im ages depending on the DSC in use. Also,  
						

							 
B230/B237/D042 6-92 SM 
printing in the specified way may not be possible depending on the specification 
for the number of images to be printed. 
Edge-to-edge borderless printing 
This function is not available in this machine. 
Printing quality 
This function can print images in  the selected printing quality. 
Normal or Default  600dpi x 600dpi (2bit) 
Fine
  600dpi x 600dpi (4bit) 
Color matching 
This function can optimize colors when printing images. 
OFF or Default  Gradation 
ON
  Saturation 
Paper type specification 
This function can match the paper type names between the machine and DSC. When this 
function sends the machines p
aper type information to the DS C, the names of paper types 
displayed on the DSCs screen are different fr om the names displayed on the machine. So, 
it is possible to match the paper  type names with this function. 
Default  Auto tray selection 
Plain paper
  Plain or recycled paper  
						

							 
SM 6-93 B230/B237/D042 
Detailed 
Descriptions 
Form printing 
This function can print images in  a predetermined layout format. 
 
[A]: Image size A4: 170mm x 128mm LT: 174.5mm x 120mm 
[B]: Image size A4: 120mm x 90mm LT: 112.5mm x 92mm 
[C]: Image size A4: 86mm x 65mm LT: 88mm x 61mm 
[D]: Image size A4: 86mm x 65mm LT: 88mm x 61mm 
[E]: Image size A4: 152.4mm x 108mm LT: 156.7mm x 102.6mm 
Camera memo printing 
This function can print text data with an image if it is attached to the image.  
						

							 
B230/B237/D042 6-94 SM 
6.16 COPY DATA SECURITY UNIT 
6.16.1 GENERAL FUNCTION 
This function can prevent unauthorized copying by making a special masking pattern with 
an embedded message when an original is printed. This enables the machine to make 
grayed-out output w hen it is copied. 
Confidential documents can never  be duplicated on a machine that has the optional Copy 
Data Security Unit. 
The embedded messages appear when a confi dential document is copied on a machine 
without an optional Copy Data Security Unit. 
However, some MFP functions are di sabled if this function is enabled. 
ƒ  Reduction less than 50% is disabled. 
ƒ Scanner/Fax applicat ion is disabled. 
When copying on a machine with an optional Copy Data Security Unit 
 
When copying on a machine without an optional Copy Data Security 
Unit 
 
Setting 
This function can be turned on or off with  a user tool (User Tools < System Settings  
						

							 
SM 6-95 B230/B237/D042 
Detailed 
Descriptions 

						

							 
B230/B237/D042 6-96 SM 
6.17 FILE FORMAT CONVERTER (MLB) 
In this machine, this conversion is hardware-based, using the optional File Format 
Converter. Without the File Format Converte r, copy and print jobs cannot be downloaded to 
a PC (or e-Cabinet) from the document server. 
Two common target formats are provided for conv ersion to files that can be selected by the 
SP modes: These are JPEG and TIFF. 
In scanner mode, users can select  file format from TIFF, JPEG, or PDF. The time to create 
TIFF and JPEG files is shortened with the File Format Converter, especially for high 
scanning resolution and large image size. When the customer selects PDF, the machine 
creates a TIFF or JPEG file from the scanned im age first. Then it converts it to PDF. 
Therefore, the total time to create a PDF is al so shortened with the File Format Converter.  
						

							 
SM 6-97 B230/B237/D042 
Detailed 
Descriptions 
6.18 DATA OVERWRITE SECURITY UNIT (B735) 
6.18.1  AUTO ERASE MEMORY 
A document scanned in the copier  or scanner mode, or data sent from a printer driver for 
printing, is stored temporarily on the hard di sk of the machine. The document stays in the 
hard disk as temporary data even after the copy  or print job is completed. Auto Erase 
Memory erases the temporary data  on the hard disk by writing over it. 
Types of Data Overwritten and Not Overwritten 
The following table shows the types of data t hat can or cannot be overwritten by Auto 
Erase Memory. 
 
Copier Copy jobs 
Printer 1) Print jobs 
2) Sample Print/Locked Print jobs(*1) 
3) Spool Printing jobs 
Scanner(*2) 1) Scanned files sent by e-mail 
2) Files sent by Scan to Folder 
3) Documents sent or retrieved by using Web 
Image Monitor, Desk Top Binder, or Scan 
Router 
Fax 
PC fax print jobs, Internet fax transmission jobs
Data overwritten by 
Auto Erase Memory 
Document 
Server Temporary data that still remains in the 
Document Server even after user erases the 
data in the Document Server. 
Data not overwritten 
by Auto  Erase 
Memory  1) Documents stored by the user 
in the Document Server using 
the Copier, Printer or Scanner functions 
2) Information registered in the Address Book (*3) 
3) Counters stored under each user code 
4) Network setting 
 
ƒ  *1: A Sample Print or Locked Print job  can only be overwritten after it has been 
executed.  
						

							 
B230/B237/D042 6-98 SM 
ƒ  *2: Temporary data via TWAIN scanner function are not originally stored in HDD. 
You can use TWAIN scanner functi ons together with the DOS unit. 
ƒ  *3: Data stored in the Address Book can be encrypted for security. 
Overwrite timing 
Overwriting starts automatically once a c opy, print or scanner job is completed. 
Copier, printer and scanner functions take priori ty over the Data Overwrite function. If a 
copier, printer or scanner job comes while a prev ious job is being overwritten, the overwrite 
process is automatically interrupted  until the next job is completed. 
  
						

							 
SPECIFICATIONS 
SECTION 7    SPECIFICATIONS REVISION HISTORY 
Page Date Added/Updated/New 
1    03/30/2007  Specifications 
5 ~ 7  03/30/2007  Specifications 
22    09/05/2006  Machine Configuration 
26    09/05/2006  Finis her and Punch Unit