Ricoh Mp C3000 Service Manual
Have a look at the manual Ricoh Mp C3000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 666
B230/B237/D042 5-278 SM
009 Original Detection
010 Rear Edge Detection
011 Skew Correction
013 Registration
014 Exit
015 Feed Cover 0: ADF cover close
1: ADF cover open
016 Lift Up 0: ADF close
1: ADF open
[ADF Output Check]
6008
Activates the electrical co mponents for functional check.
It is not possible to activate more than one component at the same time.
003 Feed Motor Forward Feed Motor-Forward rotation
004 Feed Motor Reverse Feed Motor-Reverse rotation
005 Relay Motor...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-665.png "Page 666
B230/B237/D042 5-278 SM
009 Original Detection
010 Rear Edge Detection
011 Skew Correction
013 Registration
014 Exit
015 Feed Cover 0: ADF cover close
1: ADF cover open
016 Lift Up 0: ADF close
1: ADF open
[ADF Output Check]
6008
Activates the electrical co mponents for functional check.
It is not possible to activate more than one component at the same time.
003 Feed Motor Forward Feed Motor-Forward rotation
004 Feed Motor Reverse Feed Motor-Reverse rotation
005 Relay Motor...")
![Page 667
SM 5-279 B230/B237/D042
Service
Tables
[Stamp Position Adj.] Fax Stamp Position Adjustment
6010
Adjusts the horizontal position of the stamp on the scanned originals.
6010 1 Stamp Position Adj. *ENG
[-5.0 to 5.0 / 0 / 1 mm/step]
[Original Size Detection Priority] Original Size Detection Priority
6016
Specifies the original size for a size detected by the original sensor, since
original sensors cannot recognize all sizes.
001 Original Size Detection
Priority *ENG[0 or 1 /
0 / -...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-666.png "Page 667
SM 5-279 B230/B237/D042
Service
Tables
[Stamp Position Adj.] Fax Stamp Position Adjustment
6010
Adjusts the horizontal position of the stamp on the scanned originals.
6010 1 Stamp Position Adj. *ENG
[-5.0 to 5.0 / 0 / 1 mm/step]
[Original Size Detection Priority] Original Size Detection Priority
6016
Specifies the original size for a size detected by the original sensor, since
original sensors cannot recognize all sizes.
001 Original Size Detection
Priority *ENG[0 or 1 /
0 / -...")
![Page 668
B230/B237/D042 5-280 SM
Adjusts the jogger position.
001 - *ENG
[-4.0 to 4.0 / 0 / 0.4 mm/step]
[Punch Position: Sub Scan]
6128
Adjusts the punching position in the sub scan direction.
001 Domestic 2Hole *ENG
002 North America 3Hole *ENG
003 Europe 4Hole *ENG
004 North Europe 4Hole *ENG
005 North Europe 2Hole *ENG [-7.5 to 7.5 /
0 / 0.5 mm/step]]
[Punch Position: Main Scan]
6129
Adjusts the punching position in the main scan direction.
001 Domestic 2Hole *ENG
002 North...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-667.png "Page 668
B230/B237/D042 5-280 SM
Adjusts the jogger position.
001 - *ENG
[-4.0 to 4.0 / 0 / 0.4 mm/step]
[Punch Position: Sub Scan]
6128
Adjusts the punching position in the sub scan direction.
001 Domestic 2Hole *ENG
002 North America 3Hole *ENG
003 Europe 4Hole *ENG
004 North Europe 4Hole *ENG
005 North Europe 2Hole *ENG [-7.5 to 7.5 /
0 / 0.5 mm/step]]
[Punch Position: Main Scan]
6129
Adjusts the punching position in the main scan direction.
001 Domestic 2Hole *ENG
002 North...")
![Page 669
SM 5-281 B230/B237/D042
Service
Tables
004 A4Y (LEF) *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF) *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF) *ENG
009 LT-T (SEF) *ENG
010 LT-Y (LEF) *ENG
011 12 x 18 *ENG
012 Other *ENG
[Skew Correction Control]
6131
Selects the skew correction control for each paper size. These are only
activated for B793.
001 A3T (SEF) *ENG
002 B4T (SEF) *ENG
003 A4T (SEF) *ENG
004 A4Y (LEF) *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF) *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF)...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-668.png "Page 669
SM 5-281 B230/B237/D042
Service
Tables
004 A4Y (LEF) *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF) *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF) *ENG
009 LT-T (SEF) *ENG
010 LT-Y (LEF) *ENG
011 12 x 18 *ENG
012 Other *ENG
[Skew Correction Control]
6131
Selects the skew correction control for each paper size. These are only
activated for B793.
001 A3T (SEF) *ENG
002 B4T (SEF) *ENG
003 A4T (SEF) *ENG
004 A4Y (LEF) *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF) *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF)...")
![Page 670
B230/B237/D042 5-282 SM
012 Other *ENG
[Jogger Fence Fine Adj]
6132 This SP adjusts the distance between t
he jogger fences and the sides of the
stack on the finisher stapling tray in th e Booklet Finisher B793. The adjustment
is done perpendicular to the direction of paper feed.
001 A3T (SEF) *ENG
002 B4T (SEF) *ENG
003 A4T (SEF) *ENG
004 A4Y (LEF) *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF) *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF) *ENG
009 LT-T (SEF) *ENG
010 LT-Y (LEF) *ENG
011 12 x 18...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-669.png "Page 670
B230/B237/D042 5-282 SM
012 Other *ENG
[Jogger Fence Fine Adj]
6132 This SP adjusts the distance between t
he jogger fences and the sides of the
stack on the finisher stapling tray in th e Booklet Finisher B793. The adjustment
is done perpendicular to the direction of paper feed.
001 A3T (SEF) *ENG
002 B4T (SEF) *ENG
003 A4T (SEF) *ENG
004 A4Y (LEF) *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF) *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF) *ENG
009 LT-T (SEF) *ENG
010 LT-Y (LEF) *ENG
011 12 x 18...")
![Page 671
SM 5-283 B230/B237/D042
Service
Tables
6134 [Saddle Stitch Position Adjustment]
User
SP Use this SP to adjust the stapling posit
ion of the booklet stapler when paper is
stapled and folded in the Booklet Finisher B793.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 DLT-T (SEF)
006 LG-T (SEF)
007 LT-T (SEF)
008 12 x 18
009 Other [-3.0 to 3.0 /
0 / 0.2 mm/step]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple posit ion away from the crease.
6135...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-670.png "Page 671
SM 5-283 B230/B237/D042
Service
Tables
6134 [Saddle Stitch Position Adjustment]
User
SP Use this SP to adjust the stapling posit
ion of the booklet stapler when paper is
stapled and folded in the Booklet Finisher B793.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 DLT-T (SEF)
006 LG-T (SEF)
007 LT-T (SEF)
008 12 x 18
009 Other [-3.0 to 3.0 /
0 / 0.2 mm/step]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple posit ion away from the crease.
6135...")
![Page 672
B230/B237/D042 5-284 SM
[Folding Number]
6136
Sets the number of times that folding is done in the Booklet Finisher (B804).
001 - [2 to 30 / 2 / 1 time/step
[Finisher Free Run]
6137
These SPs are used only for B793 finisher.
001 Free Run 1 Free run for paper edge stapling.
002 Free Run 2 Free run for booklet stapling.
003 Free Run 3 Shipping free run. Simulates standby conditions during
shipping.
004 Free Run 4
DFU
6138 [FIN (TIG) INPUT Check] Finisher (B793) Input Check...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-671.png "Page 672
B230/B237/D042 5-284 SM
[Folding Number]
6136
Sets the number of times that folding is done in the Booklet Finisher (B804).
001 - [2 to 30 / 2 / 1 time/step
[Finisher Free Run]
6137
These SPs are used only for B793 finisher.
001 Free Run 1 Free run for paper edge stapling.
002 Free Run 2 Free run for booklet stapling.
003 Free Run 3 Shipping free run. Simulates standby conditions during
shipping.
004 Free Run 4
DFU
6138 [FIN (TIG) INPUT Check] Finisher (B793) Input Check...")
![Page 673
SM 5-285 B230/B237/D042
Service
Tables
6144 [FIN (KIN) OUPUT Check] Finisher (B408) Output Check
Displays the signals received from sensor
s and switches of the booklet finisher.
(Output Check Table)
6146 [FIN (KAN) OUPUT Check] Finisher (B792) Output Check
Displays the signals received from sensor
s and switches of the booklet finisher.
(Output Check Table)
SP7-XXX (Data Log)
[Total SC Counter]
7401
Displays the number of SC codes detected.
7401 1 SC Counter *CTL
[0 to 9999...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-672.png "Page 673
SM 5-285 B230/B237/D042
Service
Tables
6144 [FIN (KIN) OUPUT Check] Finisher (B408) Output Check
Displays the signals received from sensor
s and switches of the booklet finisher.
(Output Check Table)
6146 [FIN (KAN) OUPUT Check] Finisher (B792) Output Check
Displays the signals received from sensor
s and switches of the booklet finisher.
(Output Check Table)
SP7-XXX (Data Log)
[Total SC Counter]
7401
Displays the number of SC codes detected.
7401 1 SC Counter *CTL
[0 to 9999...")
![Page 674
B230/B237/D042 5-286 SM
7403 10 Latest 9
[Total Paper Jam Counter]
7502
Displays the total number of jams detected.
7502 1 Total Jam *
CTL [0 to 9999 /
0 / 1 sheet/step ]
[Total Original Jam Counter]
7503
Displays the total number of original jams.
7503 1 Original Jam counter *CTL [0 to 9999 / 0 / 1 original/step ]
[Paper Jam Location]
ON: On check, OFF: Off Check
7504
Displays the number of jams accordi ng to the location where jams were
detected.
NOTE: The LCT is...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-673.png "Page 674
B230/B237/D042 5-286 SM
7403 10 Latest 9
[Total Paper Jam Counter]
7502
Displays the total number of jams detected.
7502 1 Total Jam *
CTL [0 to 9999 /
0 / 1 sheet/step ]
[Total Original Jam Counter]
7503
Displays the total number of original jams.
7503 1 Original Jam counter *CTL [0 to 9999 / 0 / 1 original/step ]
[Paper Jam Location]
ON: On check, OFF: Off Check
7504
Displays the number of jams accordi ng to the location where jams were
detected.
NOTE: The LCT is...")
SM 5-283 B230/B237/D042 Service Tables 6134 [Saddle Stitch Position Adjustment] User SP Use this SP to adjust the stapling posit ion of the booklet stapler when paper is stapled and folded in the Booklet Finisher B793. 001 A3 SEF 002 B4 SEF 003 A4 SEF 004 B5 SEF 005 DLT-T (SEF) 006 LG-T (SEF) 007 LT-T (SEF) 008 12 x 18 009 Other [-3.0 to 3.0 / 0 / 0.2 mm/step] + Value: Shifts staple position toward the crease. - Value: Shifts staple posit ion away from the crease. 6135 [Folder Position Adj.] User SP This SP corrects the folding positi on when paper is stapled and folded in the Booklet Finisher B793. 001 A3 SEF 002 B4 SEF 003 A4 SEF 004 B5 SEF 005 DLT-T (SEF) 006 LG-T (SEF) 007 LT-T (SEF) 008 12 x 18 009 Other [-3.0 to 3.0 / 0 / 0.2 mm/step] + Value: Shifts staple position toward the crease. - Value: Shifts staple posit ion away from the crease. Rev. 11/2006
B230/B237/D042 5-284 SM [Folding Number] 6136 Sets the number of times that folding is done in the Booklet Finisher (B804). 001 - [2 to 30 / 2 / 1 time/step [Finisher Free Run] 6137 These SPs are used only for B793 finisher. 001 Free Run 1 Free run for paper edge stapling. 002 Free Run 2 Free run for booklet stapling. 003 Free Run 3 Shipping free run. Simulates standby conditions during shipping. 004 Free Run 4 DFU 6138 [FIN (TIG) INPUT Check] Finisher (B793) Input Check Displays the signals received from sensor s and switches of the booklet finisher. ( Input Check Table) 6139 [FIN (KIN) INPUT Check] Finisher (B408) Input Check Displays the signals received from sensor s and switches of the booklet finisher. ( Input Check Table) 6141 [FIN (KAN) INPUT Check] Finisher (B792) Input Check Displays the signals received from sensor s and switches of the booklet finisher. ( Input Check Table) 6143 [FIN (TIG) OUPUT Check] Finisher (B793) Output Check Displays the signals received from sensor s and switches of the booklet finisher. ( Output Check Table) ⇒ Rev. 11/2006
SM 5-285 B230/B237/D042 Service Tables 6144 [FIN (KIN) OUPUT Check] Finisher (B408) Output Check Displays the signals received from sensor s and switches of the booklet finisher. (Output Check Table) 6146 [FIN (KAN) OUPUT Check] Finisher (B792) Output Check Displays the signals received from sensor s and switches of the booklet finisher. (Output Check Table) SP7-XXX (Data Log) [Total SC Counter] 7401 Displays the number of SC codes detected. 7401 1 SC Counter *CTL [0 to 9999 / 0 / 1/step ] [SC History] 7403 Logs the SC codes detected. The 10 most recently detected SC Codes are not displayed on the screen, but can be seen on the SMC (logging) outputs. 7403 1 Latest 7403 2 Latest 1 7403 3 Latest 2 7403 4 Latest 3 7403 5 Latest 4 7403 6 Latest 5 7403 7 Latest 6 7403 8 Latest 7 7403 9 Latest 8 *CTL - Rev. 11/2006
B230/B237/D042 5-286 SM 7403 10 Latest 9 [Total Paper Jam Counter] 7502 Displays the total number of jams detected. 7502 1 Total Jam * CTL [0 to 9999 / 0 / 1 sheet/step ] [Total Original Jam Counter] 7503 Displays the total number of original jams. 7503 1 Original Jam counter *CTL [0 to 9999 / 0 / 1 original/step ] [Paper Jam Location] ON: On check, OFF: Off Check 7504 Displays the number of jams accordi ng to the location where jams were detected. NOTE: The LCT is counted as the 3rd feed station. 7504 1 At Power On *CTL 7504 3 Tray 1: ON *CTL 7504 4 Tray 2: ON *CTL 7504 5 Tray 3: ON *CTL 7504 6 Tray 4: ON *CTL 7504 8 Bypass: ON *CTL 7504 9 Duplex: ON *CTL 7504 11 Vertical Transport 1: ON *CTL 7504 12 Vertical Transport 2: ON *CTL 7504 13 Bank Transport 1 *CTL For details, see the Jam Detection in the Troubleshooting (section 4).
SM 5-287 B230/B237/D042 Service Tables 7504 17 Registration: ON *CTL 7504 18 Fusing Entrance: ON *CTL 7504 19 Fusing Exit: ON *CTL 7504 20 Paper Exit: ON *CTL 7504 21 Relay Exit: ON *CTL 7504 22 Relay Transport: ON *CTL 7504 25 Duplex Exit: ON *CTL 7504 26 Duplex Reverse: ON *CTL 7504 27 Duplex Entrance: ON *CTL 7504 28 1+Y59 Bin Exit Sensor *CTL 7504 51 SEF Sensor 1 *CTL 7504 52 SEF Sensor 2 *CTL 7504 53 Bank SEF Sensor 1 *CTL 7504 54 Bank SEF Sensor 2 *CTL 7504 57 Regist Sensor *CTL 7504 59 Fusing Exit Sensor *CTL 7504 60 Exit Sensor *CTL 7504 61 Relay Exit Sensor *CTL 7504 62 Relay Sensor *CTL 7504 65 Duplex Exit Sensor *CTL 7504 66 Duplex Entrance Sensor *CTL 7504 68 1-Bin Exit: ON *CTL 7504 100 Finisher Entrance *CTL
B230/B237/D042 5-288 SM 7504 101 Finisher Shift Tray Exit *CTL 7504 102 Finisher Staple *CTL 7504 103 Finisher Exit *CTL 7504 104 Finisher Drive Motor *CTL 7504 105 Finisher Tray Lift Motor *CTL 7504 106 Finisher Jogger Motor *CTL 7504 107 Finisher Shift Motor *CTL 7504 108 Finisher Staple Motor *CTL 7504 109 Finisher Exit Motor *CTL 7504 130 Finisher Entrance *CTL 7504 131 Finisher Proof Exit *CTL 7504 132 Finisher Shift Tray Exit *CTL 7504 133 Finisher Staple Exit *CTL 7504 134 Finisher Exit *CTL 7504 135 Finisher Folding *CTL 7504 136 Finisher Folding Exit *CTL 7504 137 Finisher Guide Motor *CTL 7504 138 Finisher Staple Moving Motor *CTL 7504 139 Finisher Punch Motor *CTL 7504 140 Finisher Tray Lift Motor *CTL 7504 141 Finisher Jogger Motor *CTL 7504 142 Finisher Shift Roller Motor *CTL
SM 5-289 B230/B237/D042 Service Tables 7504 143 Finisher Folding Plate Motor *CTL 7504 144 Finisher Staple Motor *CTL 7504 145 Finisher Exit Motor *CTL 7504 146 Finisher Stack 1 Release Motor *CTL 7504 147 Finisher Stack 2 Release Motor *CTL 7504 148 Finisher Stopper Motor *CTL 7504 160 Finisher Entrance: ON *CTL 7504 161 Finisher Entrance: OFF *CTL 7504 162 Finisher Stack Exit *CTL 7504 163 Finisher Staple *CTL 7504 164 Finisher Staple Cancel *CTL 7504 165 Finisher Jogger Motor *CTL 7504 166 Finisher Pickup Lift Motor *CTL 7504 167 Finisher Staple Slide *CTL 7504 168 Finisher Stack Tray *CTL 7504 169 Finisher Belt Lift Solenoid *CTL 7504 230 Finisher Exit No Response *CTL 7504 231 Finisher Communication Error *CTL
B230/B237/D042 5-290 SM [Original Jam Detection] 7505 Displays the total number of original jams by location. 7505 1 At Power On 7505 3 Skew Correction: ON 7505 4 Registration: ON 7505 5 Paper Exit: ON 7505 53 Skew Correction: OFF 7505 54 Registration: OFF 7505 55 Paper Exit: OFF *CTL - [Jam Count by Paper Size] 7506 Displays the number of jams according to the paper size. 7506 5 A4 LEF 7506 6 A5 LEF 7506 14 B5 LEF 7506 38 LT LEF 7506 44 HLT LEF 7506 132 A3 SEF 7506 133 A4 SEF 7506 134 A5 SEF 7506 141 B4 SEF 7506 142 B5 SEF 7506 160 DLT SEF 7506 164 LG SEF *CTL [0 to 9999 / 0 / 1 sheet/step ]
SM 5-291 B230/B237/D042
Service
Tables
7506 166 LT SEF
7506 172 HLT SEF
7506 255 Others
[Plotter Jam History]
7507
Displays the 10 most rec ently detected paper jams.
7507 1 Latest
7507 2 Latest 1
7507 3 Latest 2
7507 4 Latest 3
7507 5 Latest 4
7507 6 Latest 5
7507 7 Latest 6
7507 8 Latest 7
7507 9 Latest 8
7507 10 Latest 9 *CTL -
[Original Jam History]
7508
Displays the 10 most recent ly detected original jams.
7508 1 Latest
7508 2 Latest-1
7508 3 Latest-2
7508 4 Latest-3
7508 5 Latest-4 *CTL
-
B230/B237/D042 5-292 SM 7508 6 Latest-5 7508 7 Latest-6 7508 8 Latest-7 7508 9 Latest-8 7508 10 Latest-9 7801 [ROM No./Firmware Version] 7801 255 Engine - Displays all versions and ROM numbers in SP7-910 and SP7-911. 7803 [PM Counter Display] (Page, Unit, [Color]) Displays the number of sheets print ed for each current maintenance unit. PM counters click up based on the number of A4 (LT) LEF size sheets printed. Therefore, the A3 (DLT) Double Count is activated. The Double Count cannot be deactivated. When a unit is replaced, the machine aut omatically detects that the new unit is installed. Then, the cu rrent PM counter value is automatically moved to the PM Counter - Previous (SP7-906-1 to 10) and is reset to “0”. The total number of sheets printed with the last unit replaced can be checked with SP7-906-1 to 10. NOTE : The LCT is counted as the 3rd feed station. 7803 1 Paper 7803 2 Page: PCU: Bk 7803 3 Page: PCU: M 7803 4 Page: PCU: C 7803 5 Page: PCU: Y *ENG [0 to 9999999 / 0 / 1 page/step ]