Ricoh Mp C3000 Service Manual
Have a look at the manual Ricoh Mp C3000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 416
B230/B237/D042 5-28 SM
[Color Registration Correction] FA
2101 These values are the parameters for t
he automatic line position adjustment and
are adjusted at the factory. However, you must input a value for SP2101-001
after replacing the laser optics housing unit. For deta ils, see Laser Optics
Housing Unit in the Replacement and Adjustment section. The value should
be provided with the new laser optics housing unit.
001 Main Dot: Bk *ENG
002 Main Dot: M *ENG
003 Main Dot: C...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-415.png "Page 416
B230/B237/D042 5-28 SM
[Color Registration Correction] FA
2101 These values are the parameters for t
he automatic line position adjustment and
are adjusted at the factory. However, you must input a value for SP2101-001
after replacing the laser optics housing unit. For deta ils, see Laser Optics
Housing Unit in the Replacement and Adjustment section. The value should
be provided with the new laser optics housing unit.
001 Main Dot: Bk *ENG
002 Main Dot: M *ENG
003 Main Dot: C...")
![Page 417
SM 5-29 B230/B237/D042
Service
Tables
006 Main Mag.: Low Speed:
M *ENG
007 Main Mag.: High Speed:
C *ENG
008 Main Mag.: Medium
Speed: C *ENG
009 Main Mag.: Low Speed: C *ENG
010 Main Mag.: High Speed:
Y *ENG
011 Main Mag.: Medium
Speed: Y *ENG
012 Main Mag.: Low Speed: Y *ENG
2103 [Erase Margin Adjustment] (Area, Paper Size)
Adjusts the erase margin by del
eting image data at the margins.
001 Lead Edge Width *ENG
002 Trail. Edge Width *ENG [0 to 9.9 /
4.2 / 0.1...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-416.png "Page 417
SM 5-29 B230/B237/D042
Service
Tables
006 Main Mag.: Low Speed:
M *ENG
007 Main Mag.: High Speed:
C *ENG
008 Main Mag.: Medium
Speed: C *ENG
009 Main Mag.: Low Speed: C *ENG
010 Main Mag.: High Speed:
Y *ENG
011 Main Mag.: Medium
Speed: Y *ENG
012 Main Mag.: Low Speed: Y *ENG
2103 [Erase Margin Adjustment] (Area, Paper Size)
Adjusts the erase margin by del
eting image data at the margins.
001 Lead Edge Width *ENG
002 Trail. Edge Width *ENG [0 to 9.9 /
4.2 / 0.1...")
![Page 418
B230/B237/D042 5-30 SM
2105 [LD Power Adj .] (Process Speed, Color)
Displays the LD power of each
color for each process speed.
Each LD power setting is dec ided by process control.
001 High Speed: Bk *ENG
002 High Speed: M *ENG
003 High Speed: C *ENG
004 High Speed: Y *ENG
005 Middle Speed: Bk *ENG
006 Middle Speed: M *ENG
007 Middle Speed: C *ENG
008 Middle Speed: Y *ENG
009 Low Speed: Bk *ENG
010 Low Speed: M *ENG
011 Low Speed: C *ENG
012 Low Speed: Y...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-417.png "Page 418
B230/B237/D042 5-30 SM
2105 [LD Power Adj .] (Process Speed, Color)
Displays the LD power of each
color for each process speed.
Each LD power setting is dec ided by process control.
001 High Speed: Bk *ENG
002 High Speed: M *ENG
003 High Speed: C *ENG
004 High Speed: Y *ENG
005 Middle Speed: Bk *ENG
006 Middle Speed: M *ENG
007 Middle Speed: C *ENG
008 Middle Speed: Y *ENG
009 Low Speed: Bk *ENG
010 Low Speed: M *ENG
011 Low Speed: C *ENG
012 Low Speed: Y...")
![Page 419
SM 5-31 B230/B237/D042
Service
Tables
002 Shading Correction Flag *ENG [0 or 1 / 1 / 1 /step]
[Test Pattern]
2109
Generates the test pattern usi ng COPY Window tab in the LCD.
003 Pattern Selection - [0 to 23 /
0 / 1/step]
0 None
1: 1-dot line pattern (Vertical)
2: 2-dot line pattern (Vertical)
3: 1-dot line pattern (Horizontal)
4: 2-dot line pattern (Horizontal)
5: 1-dot grid pattern (Vertical)
6: 1-dot grid pattern (Horizontal)
7: 1-dot grid pattern (Fine)
8: 1-dot grid...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-418.png "Page 419
SM 5-31 B230/B237/D042
Service
Tables
002 Shading Correction Flag *ENG [0 or 1 / 1 / 1 /step]
[Test Pattern]
2109
Generates the test pattern usi ng COPY Window tab in the LCD.
003 Pattern Selection - [0 to 23 /
0 / 1/step]
0 None
1: 1-dot line pattern (Vertical)
2: 2-dot line pattern (Vertical)
3: 1-dot line pattern (Horizontal)
4: 2-dot line pattern (Horizontal)
5: 1-dot grid pattern (Vertical)
6: 1-dot grid pattern (Horizontal)
7: 1-dot grid pattern (Fine)
8: 1-dot grid...")
![Page 420
B230/B237/D042 5-32 SM
007 Density: M -
008 Density: C -
009 Density: Y - pattern.
[0 to 15 /
15 / 1 /step]
0: Lightest density
15: Darkest density
2111 [Forced Line Position Adj.]
001 Mode a - Executes the fine li
ne position adjustment
twice.
If this SP is not completed (NG is
displayed), do SP2111-003 first and then try
this SP again.
002 Mode b - Executes the fine li
ne position adjustment
once.
If this SP is not completed, do SP2111-003
first and then try this SP again....](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-419.png "Page 420
B230/B237/D042 5-32 SM
007 Density: M -
008 Density: C -
009 Density: Y - pattern.
[0 to 15 /
15 / 1 /step]
0: Lightest density
15: Darkest density
2111 [Forced Line Position Adj.]
001 Mode a - Executes the fine li
ne position adjustment
twice.
If this SP is not completed (NG is
displayed), do SP2111-003 first and then try
this SP again.
002 Mode b - Executes the fine li
ne position adjustment
once.
If this SP is not completed, do SP2111-003
first and then try this SP again....")
![Page 421
SM 5-33 B230/B237/D042
Service
Tables
001 Pulse: M *ENG
002 Pulse: C *ENG
003 Pulse: Y *ENG[–100 to 100 /
0 / 1 pulse/step]
2118 [Skew Adjustment]
001 Pulse: M *ENG
002 Pulse: C *ENG
003 Pulse: Y *ENGChanges the current skew adjustment
values to the values
specified with SP2117.
These SPs must be used when a new laser
optics housing unit is installed or when
SC285 occurs. For details, see Laser
Optics Housing Unit in the Replacement
and Adjustment section.
[Skew...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-420.png "Page 421
SM 5-33 B230/B237/D042
Service
Tables
001 Pulse: M *ENG
002 Pulse: C *ENG
003 Pulse: Y *ENG[–100 to 100 /
0 / 1 pulse/step]
2118 [Skew Adjustment]
001 Pulse: M *ENG
002 Pulse: C *ENG
003 Pulse: Y *ENGChanges the current skew adjustment
values to the values
specified with SP2117.
These SPs must be used when a new laser
optics housing unit is installed or when
SC285 occurs. For details, see Laser
Optics Housing Unit in the Replacement
and Adjustment section.
[Skew...")
![Page 422
B230/B237/D042 5-34 SM
005 Front *ENG
006 Center *ENG
007 Rear *ENG
[ID Sensor Check Result: Ave.] DFU
2141 Displays the average result val
ues of the ID sensor check.
Bk, M, C, Y: ID sensor s for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Bk *ENG
002 M *ENG
003 C *ENG
004 Y *ENG
005 Front *ENG
006 Center *ENG
007 Rear *ENG[0 to 5 /
0 / 0.01V/step]
[ID Sensor Check Result] DFU
2142 Displays the maximum result values of the...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-421.png "Page 422
B230/B237/D042 5-34 SM
005 Front *ENG
006 Center *ENG
007 Rear *ENG
[ID Sensor Check Result: Ave.] DFU
2141 Displays the average result val
ues of the ID sensor check.
Bk, M, C, Y: ID sensor s for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Bk *ENG
002 M *ENG
003 C *ENG
004 Y *ENG
005 Front *ENG
006 Center *ENG
007 Rear *ENG[0 to 5 /
0 / 0.01V/step]
[ID Sensor Check Result] DFU
2142 Displays the maximum result values of the...")
![Page 423
SM 5-35 B230/B237/D042
Service
Tables
006 Maximum: Center *ENG
007 Maximum: Rear *ENG
[ID Sensor Check Result] DFU
2143 Displays the minimum result val
ues of the ID sensor check.
Bk, M, C, Y: ID sensor s for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Minimum: Bk *ENG
002 Minimum: M *ENG
003 Minimum: C *ENG
004 Minimum: Y *ENG
005 Minimum: Front *ENG
006 Minimum: Center *ENG
007 Minimum: Rear *ENG [0 to 5 /
0 / 0.01V/step]...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-422.png "Page 423
SM 5-35 B230/B237/D042
Service
Tables
006 Maximum: Center *ENG
007 Maximum: Rear *ENG
[ID Sensor Check Result] DFU
2143 Displays the minimum result val
ues of the ID sensor check.
Bk, M, C, Y: ID sensor s for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Minimum: Bk *ENG
002 Minimum: M *ENG
003 Minimum: C *ENG
004 Minimum: Y *ENG
005 Minimum: Front *ENG
006 Minimum: Center *ENG
007 Minimum: Rear *ENG [0 to 5 /
0 / 0.01V/step]...")
![Page 424
B230/B237/D042 5-36 SM
007 Maximum 2: Rear *ENG
[ID Sensor Check Result] DFU
2145 Displays the minimum result 2 va
lues of the ID sensor check.
Bk, M, C, Y: ID sensor s for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Minimum 2: Bk *ENG
002 Minimum 2: M *ENG
003 Minimum 2: C *ENG
004 Minimum 2: Y *ENG
005 Minimum 2: Front *ENG
006 Minimum 2: Center *ENG
007 Minimum 2: Rear *ENG [0 to 5 /
0 / 0.01V/step]
[Area Mag....](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-423.png "Page 424
B230/B237/D042 5-36 SM
007 Maximum 2: Rear *ENG
[ID Sensor Check Result] DFU
2145 Displays the minimum result 2 va
lues of the ID sensor check.
Bk, M, C, Y: ID sensor s for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Minimum 2: Bk *ENG
002 Minimum 2: M *ENG
003 Minimum 2: C *ENG
004 Minimum 2: Y *ENG
005 Minimum 2: Front *ENG
006 Minimum 2: Center *ENG
007 Minimum 2: Rear *ENG [0 to 5 /
0 / 0.01V/step]
[Area Mag....")
![Page 425
SM 5-37 B230/B237/D042
Service
Tables
032 Area5: Bk *ENG
033 Area6: Bk *ENG
034 Area7: Bk *ENG
035 Area8: Bk *ENG
036 Area9: Bk *ENG
037 Area10: Bk *ENG
038 Area11: Bk *ENG
039 Area12: Bk *ENGNot used
079 Area0: M
*ENG Not used
080 Area1: M *ENG
081 Area2: M *ENG
082 Area3: M *ENG
083 Area4: M *ENG
084 Area5: M *ENG
085 Area6: M *ENG
086 Area7: M *ENG
087 Area8: M *ENG[–256 to 255 /
0 / 1 sub-dot/step]
088 Area9: M *ENG
089 Area10: M *ENG
090 Area11: M *ENG
091 Area12: M *ENGNot used...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-424.png "Page 425
SM 5-37 B230/B237/D042
Service
Tables
032 Area5: Bk *ENG
033 Area6: Bk *ENG
034 Area7: Bk *ENG
035 Area8: Bk *ENG
036 Area9: Bk *ENG
037 Area10: Bk *ENG
038 Area11: Bk *ENG
039 Area12: Bk *ENGNot used
079 Area0: M
*ENG Not used
080 Area1: M *ENG
081 Area2: M *ENG
082 Area3: M *ENG
083 Area4: M *ENG
084 Area5: M *ENG
085 Area6: M *ENG
086 Area7: M *ENG
087 Area8: M *ENG[–256 to 255 /
0 / 1 sub-dot/step]
088 Area9: M *ENG
089 Area10: M *ENG
090 Area11: M *ENG
091 Area12: M *ENGNot used...")
![Page 426
B230/B237/D042 5-38 SM
133 Area2: C *ENG
134 Area3: C *ENG
135 Area4: C *ENG
136 Area5: C *ENG
137 Area6: C *ENG
138 Area7: C *ENG
139 Area8: C *ENG
140 Area9: C *ENG
141 Area10: C *ENG
142 Area11: C *ENG
143 Area12: C *ENGNot used
183 Area0: Y
*ENG Not used
184 Area1: Y *ENG
185 Area2: Y *ENG
186 Area3: Y *ENG
187 Area4: Y *ENG
188 Area5: Y *ENG
189 Area6: Y *ENG
190 Area7: Y *ENG
191 Area8: Y *ENG[–256 to 255 /
0 / 1 sub-dot/step]
192 Area9: Y *ENG
193 Area10: Y *ENG
194 Area11: Y *ENGNot...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-425.png "Page 426
B230/B237/D042 5-38 SM
133 Area2: C *ENG
134 Area3: C *ENG
135 Area4: C *ENG
136 Area5: C *ENG
137 Area6: C *ENG
138 Area7: C *ENG
139 Area8: C *ENG
140 Area9: C *ENG
141 Area10: C *ENG
142 Area11: C *ENG
143 Area12: C *ENGNot used
183 Area0: Y
*ENG Not used
184 Area1: Y *ENG
185 Area2: Y *ENG
186 Area3: Y *ENG
187 Area4: Y *ENG
188 Area5: Y *ENG
189 Area6: Y *ENG
190 Area7: Y *ENG
191 Area8: Y *ENG[–256 to 255 /
0 / 1 sub-dot/step]
192 Area9: Y *ENG
193 Area10: Y *ENG
194 Area11: Y *ENGNot...")
SM 5-33 B230/B237/D042 Service Tables 001 Pulse: M *ENG 002 Pulse: C *ENG 003 Pulse: Y *ENG[–100 to 100 / 0 / 1 pulse/step] 2118 [Skew Adjustment] 001 Pulse: M *ENG 002 Pulse: C *ENG 003 Pulse: Y *ENGChanges the current skew adjustment values to the values specified with SP2117. These SPs must be used when a new laser optics housing unit is installed or when SC285 occurs. For details, see Laser Optics Housing Unit in the Replacement and Adjustment section. [Skew Adjustment Display] 2119 Displays the current skew adjustment value for each skew motor. 001 M *ENG 002 C *ENG 003 Y *ENG[–50 to 50 / 0 / 1 pulse/step] [ID Sensor Check Result] DFU 2140 Displays the results of the ID sensor check. Bk, M, C, Y: ID sensor s for the process control Front, Center, Rear: ID sensors for the automatic line position adjustment 001 Bk *ENG 002 M *ENG 003 C *ENG 004 Y *ENG[0 to 1024 / - / 1/step]
B230/B237/D042 5-34 SM 005 Front *ENG 006 Center *ENG 007 Rear *ENG [ID Sensor Check Result: Ave.] DFU 2141 Displays the average result val ues of the ID sensor check. Bk, M, C, Y: ID sensor s for the process control Front, Center, Rear: ID sensors for the automatic line position adjustment 001 Bk *ENG 002 M *ENG 003 C *ENG 004 Y *ENG 005 Front *ENG 006 Center *ENG 007 Rear *ENG[0 to 5 / 0 / 0.01V/step] [ID Sensor Check Result] DFU 2142 Displays the maximum result values of the ID sensor check. Bk, M, C, Y: ID sensor s for the process control Front, Center, Rear: ID sensors for the automatic line position adjustment 001 Maximum: Bk *ENG 002 Maximum: M *ENG 003 Maximum: C *ENG 004 Maximum: Y *ENG 005 Maximum: Front *ENG [0 to 5 / 0 / 0.01V/step]
SM 5-35 B230/B237/D042 Service Tables 006 Maximum: Center *ENG 007 Maximum: Rear *ENG [ID Sensor Check Result] DFU 2143 Displays the minimum result val ues of the ID sensor check. Bk, M, C, Y: ID sensor s for the process control Front, Center, Rear: ID sensors for the automatic line position adjustment 001 Minimum: Bk *ENG 002 Minimum: M *ENG 003 Minimum: C *ENG 004 Minimum: Y *ENG 005 Minimum: Front *ENG 006 Minimum: Center *ENG 007 Minimum: Rear *ENG [0 to 5 / 0 / 0.01V/step] [ID Sensor Check Result] DFU 2144 Displays the maximum result 2 values of the ID sensor check. Bk, M, C, Y: ID sensor s for the process control Front, Center, Rear: ID sensors for the automatic line position adjustment 001 Maximum 2: Bk *ENG 002 Maximum 2: M *ENG 003 Maximum 2: C *ENG 004 Maximum 2: Y *ENG 005 Maximum 2: Front *ENG 006 Maximum 2: Center *ENG [0 to 5 / 0 / 0.01V/step]
B230/B237/D042 5-36 SM 007 Maximum 2: Rear *ENG [ID Sensor Check Result] DFU 2145 Displays the minimum result 2 va lues of the ID sensor check. Bk, M, C, Y: ID sensor s for the process control Front, Center, Rear: ID sensors for the automatic line position adjustment 001 Minimum 2: Bk *ENG 002 Minimum 2: M *ENG 003 Minimum 2: C *ENG 004 Minimum 2: Y *ENG 005 Minimum 2: Front *ENG 006 Minimum 2: Center *ENG 007 Minimum 2: Rear *ENG [0 to 5 / 0 / 0.01V/step] [Area Mag. Correction] LD Pulse Area Correction (Color, Area) FA 2150 Adjusts the magnification for each area. The main scan (297 mm) is divided into 8 areas. Area 1 is at the front side of the machine (left side of the image) and area 8 is at the rear side of t he machine (right side of the image). Decreasing a value makes the image shift to the left side on the print. Increasing a value makes the image shift to the right side on the print. 1 pulse = 1/16 dot 027 Area0: Bk *ENG DFU 028 Area1: Bk *ENG 029 Area2: Bk *ENG 030 Area3: Bk *ENG 031 Area4: Bk *ENG[–256 to 255 / 0 / 1 sub-dot/step ]
SM 5-37 B230/B237/D042 Service Tables 032 Area5: Bk *ENG 033 Area6: Bk *ENG 034 Area7: Bk *ENG 035 Area8: Bk *ENG 036 Area9: Bk *ENG 037 Area10: Bk *ENG 038 Area11: Bk *ENG 039 Area12: Bk *ENGNot used 079 Area0: M *ENG Not used 080 Area1: M *ENG 081 Area2: M *ENG 082 Area3: M *ENG 083 Area4: M *ENG 084 Area5: M *ENG 085 Area6: M *ENG 086 Area7: M *ENG 087 Area8: M *ENG[–256 to 255 / 0 / 1 sub-dot/step] 088 Area9: M *ENG 089 Area10: M *ENG 090 Area11: M *ENG 091 Area12: M *ENGNot used 131 Area0: C *ENG Not used 132 Area1: C *ENG [–256 to 255 / 0 / 1 sub-dot/step]
B230/B237/D042 5-38 SM 133 Area2: C *ENG 134 Area3: C *ENG 135 Area4: C *ENG 136 Area5: C *ENG 137 Area6: C *ENG 138 Area7: C *ENG 139 Area8: C *ENG 140 Area9: C *ENG 141 Area10: C *ENG 142 Area11: C *ENG 143 Area12: C *ENGNot used 183 Area0: Y *ENG Not used 184 Area1: Y *ENG 185 Area2: Y *ENG 186 Area3: Y *ENG 187 Area4: Y *ENG 188 Area5: Y *ENG 189 Area6: Y *ENG 190 Area7: Y *ENG 191 Area8: Y *ENG[–256 to 255 / 0 / 1 sub-dot/step] 192 Area9: Y *ENG 193 Area10: Y *ENG 194 Area11: Y *ENGNot used
SM 5-39 B230/B237/D042 Service Tables 195 Area12: Y *ENG [Area Shad. Correct. Setting] FA 2152 Adjusts the area correction value for each LD power. The main scan is divided into 16 areas. However, the image areas are limited from area 1 to area 14. For BK and Magenta, area 1 is at the rear side of the machine (left side of the image) and area 14 is at the front side of the machine (right side of the image). For Cyan and Yellow, area 1 is at the front side of the machine (right side of the image) and area 14 is at the rear side of the machine (left side of the image). 001 Area 0: Bk *ENGThis is for the synchronizing detection board. 002 Area 1: Bk *ENG 003 Area 2: Bk *ENG 004 Area 3: Bk *ENG 005 Area 4: Bk *ENG 006 Area 5: Bk *ENG 007 Area 6: Bk *ENG 008 Area 7: Bk *ENG 009 Area 8: Bk *ENG 010 Area 9: Bk *ENG 011 Area 10: Bk *ENG 012 Area 11: Bk *ENG 013 Area 12: Bk *ENG 014 Area 13: Bk *ENG 015 Area 14: Bk *ENG[50 to 150 / 100 / 1 %/step]
B230/B237/D042 5-40 SM 016 Area 15: Bk *ENG This is out of the image area. 033 Area 0: M *ENGThis is for the synchronizing detection board. 034 Area 1: M *ENG 035 Area 2: M *ENG 036 Area 3: M *ENG 037 Area 4: M *ENG 038 Area 5: M *ENG 039 Area 6: M *ENG 040 Area 7: M *ENG 041 Area 8: M *ENG 042 Area 9: M *ENG 043 Area 10: M *ENG 044 Area 11: M *ENG 045 Area 12: M *ENG 046 Area 13: M *ENG 047 Area 14: M *ENG[50 to 150 / 100 / 1 %/step] 048 Area 15: M *ENG This is out of the image area. 065 Area 0: C *ENGThis is for the synchronizing detection board. 066 Area 1: C *ENG 067 Area 2: C *ENG 068 Area 3: C *ENG 069 Area 4: C *ENG[50 to 150 / 100 / 1 %/step]
SM 5-41 B230/B237/D042 Service Tables 070 Area 5: C *ENG 071 Area 6: C *ENG 072 Area 7: C *ENG 073 Area 8: C *ENG 074 Area 9: C *ENG 075 Area 10: C *ENG 076 Area 11: C *ENG 077 Area 12: C *ENG 078 Area 13: C *ENG 079 Area 14: C *ENG 080 Area 15: C *ENG This is out of the image area. 097 Area 0: Y *ENGThis is for the synchronizing detection board. 098 Area 1: Y *ENG 099 Area 2: Y *ENG 100 Area 3: Y *ENG 101 Area 4: Y *ENG 102 Area 5: Y *ENG 103 Area 6: Y *ENG 104 Area 7: Y *ENG 105 Area 8: Y *ENG 106 Area 9: Y *ENG 107 Area 10: Y *ENG 108 Area 11: Y *ENG[50 to 150 / 100 / 1 %/step]
B230/B237/D042 5-42 SM 109 Area 12: Y *ENG 110 Area 13: Y *ENG 111 Area 14: Y *ENG 112 Area 15: Y *ENG This is out of the image area. 2180 [Line Position Adj. Setting Clear] 001 Color Regist - DFU 002 Main Scan Length Detection - DFU 003 MUSIC Result - DFU 004 Area Magnification Correction - DFU 2181 [Line Position Adj. Result] Displays the values for each correction. ƒ Paper Int. Mag: Subdot indicates the magnification correction value between two sheets of paper. ƒ Mag.Cor. Subdot indicates the magnification correction value. ƒ M. Scan Erro. indicates the shif t correction value in the main scan direction. ƒ S. Scan Erro. Indicates the shif t correction value in the sub scan direction. ƒ M. Cor.: Dot indicates the dot corre ction value in the main scan direction. ƒ M. Cor.: Subdot indicates the sub dot correction value in the main scan direction. 001 Paper Int. Mag: Subdot: Bk *ENG [–32768 to 32767 / 0 / 1 pulse/step] 002 Mag.Cor. Subdot: Bk *ENG [–32768 to 32767 / 0 / 1 pulse/step]