Ricoh Mp C3000 Service Manual
Have a look at the manual Ricoh Mp C3000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 1216
Folder
B793 12 SM
1.3 FOLDER
1.3.1 STAPLE FOLDER UNIT
1. Remove the rear cover.
2. Disconnect all connectors and re lease the harness [A] for the staple folder unit (
x 1,
x 3).
3. Open the front cover.](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1215.png "Page 1216
Folder
B793 12 SM
1.3 FOLDER
1.3.1 STAPLE FOLDER UNIT
1. Remove the rear cover.
2. Disconnect all connectors and re lease the harness [A] for the staple folder unit (
x 1,
x 3).
3. Open the front cover.")
![Page 1217
Folder
SM 13 B793
B793
Booklet
Finisher
4. Pull out and remove the staple folder unit [B] ( x 2).
1.3.2 FOLDER UNIT
1. Remove the staple folder unit.
2. Remove the knobs [A] (
x 1 each).
3. Disconnect the connectors.
4. Remove the folder unit [B] (
x 4).](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1216.png "Page 1217
Folder
SM 13 B793
B793
Booklet
Finisher
4. Pull out and remove the staple folder unit [B] ( x 2).
1.3.2 FOLDER UNIT
1. Remove the staple folder unit.
2. Remove the knobs [A] (
x 1 each).
3. Disconnect the connectors.
4. Remove the folder unit [B] (
x 4).")
![Page 1218
Folder
B793 14 SM
1.3.3 FOLDER UNIT EXIT SENSOR
1. Remove the folder unit.
2. Remove the folder unit upper cover [A] (
x 1).
3. Remove the lower clamp roller unit [B] (
x 4).
4. Remove the folder unit exit sensor [C] (
x 1, x 1).](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1217.png "Page 1218
Folder
B793 14 SM
1.3.3 FOLDER UNIT EXIT SENSOR
1. Remove the folder unit.
2. Remove the folder unit upper cover [A] (
x 1).
3. Remove the lower clamp roller unit [B] (
x 4).
4. Remove the folder unit exit sensor [C] (
x 1, x 1).")
![Page 1219
Folder
SM 15 B793
B793
Booklet
Finisher
1.3.4 FOLDER UNIT ENTRANCE SENSOR
1. Open the front cover.
2. Pull out the staple folder unit.
3. Remove the exit cover [A] (
x 2).
4. Remove the entrance sensor [B] (
x 1, x 1).
1.3.5 STAPLER UNIT
1. Remove the rear cover.
2. Disconnect the connector [1] and release the harness (
x 2 [2]).
3. Remove two screws [3].](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1218.png "Page 1219
Folder
SM 15 B793
B793
Booklet
Finisher
1.3.4 FOLDER UNIT ENTRANCE SENSOR
1. Open the front cover.
2. Pull out the staple folder unit.
3. Remove the exit cover [A] (
x 2).
4. Remove the entrance sensor [B] (
x 1, x 1).
1.3.5 STAPLER UNIT
1. Remove the rear cover.
2. Disconnect the connector [1] and release the harness (
x 2 [2]).
3. Remove two screws [3].")
![Page 1220
Folder
B793 16 SM
4. Open the front cover and pull out the staple folder unit [4].
5. Disconnect the connectors and re lease the harness. (4 connectors [5], 1 clamp [6])](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1219.png "Page 1220
Folder
B793 16 SM
4. Open the front cover and pull out the staple folder unit [4].
5. Disconnect the connectors and re lease the harness. (4 connectors [5], 1 clamp [6])")
![Page 1221
Folder
SM 17 B793
B793
Booklet
Finisher
6. Remove a connector [7].
7. Remove 2 screws [8].](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1220.png "Page 1221
Folder
SM 17 B793
B793
Booklet
Finisher
6. Remove a connector [7].
7. Remove 2 screws [8].")
![Page 1222
Folder
B793 18 SM
8. Remove the staple tray [9].
9. Remove the guide [10]. (2 screws)](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1221.png "Page 1222
Folder
B793 18 SM
8. Remove the staple tray [9].
9. Remove the guide [10]. (2 screws)")
![Page 1223
Folder
SM 19 B793
B793
Booklet
Finisher
10. Move the stapler unit until its screw come to the hole [11] on the stay.
11. Remove the screw [12] that holds the front of the guide plate [13].](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1222.png "Page 1223
Folder
SM 19 B793
B793
Booklet
Finisher
10. Move the stapler unit until its screw come to the hole [11] on the stay.
11. Remove the screw [12] that holds the front of the guide plate [13].")
![Page 1224
Folder
B793 20 SM
12. Remove the screw [14] that holds the rear of the guide plate.
ƒ Remove the rear side screw through the hole in the stay.](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1223.png "Page 1224
Folder
B793 20 SM
12. Remove the screw [14] that holds the rear of the guide plate.
ƒ Remove the rear side screw through the hole in the stay.")
![Page 1225
Folder
SM 21 B793
B793
Booklet
Finisher
13. Remove the guide plate [13].
14. Remove the staple folding unit [15] (3 screws, 2 connectors).](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1224.png "Page 1225
Folder
SM 21 B793
B793
Booklet
Finisher
13. Remove the guide plate [13].
14. Remove the staple folding unit [15] (3 screws, 2 connectors).")
![Page 1226
Folder
B793 22 SM
15. Remove the staple cartridge [16].
16. Remove the stapler unit cover [17].
17. Remove the stapler drive unit [18].](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1225.png "Page 1226
Folder
B793 22 SM
15. Remove the staple cartridge [16].
16. Remove the stapler unit cover [17].
17. Remove the stapler drive unit [18].")
Folder SM 17 B793 B793 Booklet Finisher 6. Remove a connector [7]. 7. Remove 2 screws [8].
Folder B793 18 SM 8. Remove the staple tray [9]. 9. Remove the guide [10]. (2 screws)
Folder SM 19 B793 B793 Booklet Finisher 10. Move the stapler unit until its screw come to the hole [11] on the stay. 11. Remove the screw [12] that holds the front of the guide plate [13].
Folder B793 20 SM 12. Remove the screw [14] that holds the rear of the guide plate. ƒ Remove the rear side screw through the hole in the stay.
Folder SM 21 B793 B793 Booklet Finisher 13. Remove the guide plate [13]. 14. Remove the staple folding unit [15] (3 screws, 2 connectors).
Folder B793 22 SM 15. Remove the staple cartridge [16]. 16. Remove the stapler unit cover [17]. 17. Remove the stapler drive unit [18].
Folder SM 23 B793 B793 Booklet Finisher Reassembly 1. Mount the stapler drive unit [1]. 2. Mount the staple folder unit [2]. Do not tighten the screws [3] at this time.
Folder B793 24 SM 3. Set the special tool in t he long hole [4] on both units. 4. Secure the special tool [5] with the knob [6].
Folder SM 25 B793 B793 Booklet Finisher 5. Tighten the screws [7] for the stapler folder unit. 6. Reassemble the machine.
Others B793 26 SM 1.4 OTHERS 1.4.1 MAIN BOARD 1. Remove the rear cover. 2. Remove the main board [A] ( x 5).