Home > Ricoh > All in One Printer > Ricoh Mp C3000 Service Manual

Ricoh Mp C3000 Service Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Ricoh Mp C3000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1312
    							  
    SM 1-39 B230/B237/D042 
    Installation 
     
    1.  Install the two support brackets [A]  on the left side of the machine   
    (
      x 1 each). 
    2.  Install the two support bracket covers [B] on the support brackets (
      x 1 each). 
    Installation of the 500-Sheet Finisher 
     
    1.  Unpack the finisher and remove all tapes and retainers. 
      
    						
    							 
    B230/B237/D042 1-40 SM 
    2.  Attach the paper guide [A]. 
    3.  Attach the unit holder [B] and the holder bracket [C] (knob screw x 4). 
     
    ƒ  The holder bracket [C] must be placed outside the unit holder [B]. The holder 
    bracket is provided with the bridge unit (B227). 
     
    4.  Install the 500-sheet finisher [D] on the machine (
     x 1). 
     
    5.  Attach the bracket cover [E]. 
    6.  Install the output tray [F] on the 500-sheet finisher (2 snap rings). 
    7.  Pull out the tray extension [G] of the bridge unit. 
    8.  Turn on the main power switch, and then check the finisher operation.  
    						
    							  
    SM 1-41 B230/B237/D042 
    Installation 
    1.11 1000-SHEET FINISHER (B408) 
    1.11.1 ACCESSORY CHECK 
    Check the quantity and condition of the accessories against the following list. 
     
    No. Description Q’ty B230/B237/D042 
    1  Front Joint Bracket  1 O 
    2  Rear Joint Bracket  1 --- 
    3  Rear Joint Bracket  1 O 
    4 Grounding Plate  1  O 
    5 Copy Tray  1  O 
    6  Staple Position Decal 1 O 
    7  Screw - M4 x 14  4 O 
    8  Knob Screw - M4 x 10  1 O 
    9  Screw - M3 x 8  1 O 
    10  Knob Screw - M3 x 8  1 O 
    O = Necessary, --- = Not necessary 
      
    						
    							 
    B230/B237/D042 1-42 SM 
    1.11.2 INSTALLATION PROCEDURE 
     
    ƒ  Unplug the main machine power cord before starting the following 
    procedure.  
     
    If this finisher will be installed on the B230/B 237/D042 copier, the following options must be 
    installed before installing this finisher. 
    - Bridge Unit (B227) 
    - Paper Feed Unit (B800) or LCT (B801) 
    1.  Unpack the finisher, and then remove the stopper [A] and tapes (
     x 1). 
     
    2.  Install the front joint bracket [B], holder bracket [C] (
      x 2 - M4 x 14), and rear 
    joint bracket [D] (
      x 2 - M4 x 14). 
     
    ƒ  The holder bracket [C] must be placed out side the front joint bracket [B]. The 
    holder bracket is provided with the bridge unit (B227).  
    						
    							  
    SM 1-43 B230/B237/D042 
    Installation 
     
    3.  Install the grounding plate [E] on the finisher (
      x 2 - M3 x 8). 
     
    ƒ  Use the screw removed in step 1 and  the screw from the accessory box. 
    4.  Open the front door [F] of the finish er, and then pull the locking lever [G]. 
    5.  Align the finisher on the joint bracket s, and lock it in place by pushing the 
    locking lever. 
    6.  Secure the locking lever (1 knob screw - M3 x 8). 
    7.  Close the front door. 
    8.  Install the copy tray [H] (1 knob screw - M4 x 10). 
    9.  Connect the finisher cable [I] to the main machine below the right rear handle. 
     
    10.  Attach the staple position decal [J] to the ARDF as shown. 
    11.  Turn on the main power switch and check the finisher operation.  
    						
    							 
    B230/B237/D042 1-44 SM 
    1.12 1000-SHEET BOOKLET FINISHER (B793) 
    1.12.1 ACCESSORY CHECK 
    Check the quantity and condition of the accessories against the following list. 
    No. Description Q’ty 
    1  Rear Joint Bracket  1 
    2  Front Joint Bracket  1 
    3 Grounding Plate 1 
    4 Upper Output Tray  1 
    5 Cushion  2 
    6 Lower Output Tray  1 
    7  Short Knob Screw 1 
    8  Long Knob Screw  1 
    9  Screw (M3 x 8) 2 
    10  Screw (M4 x 14)  4  
    						
    							  
    SM 1-45 B230/B237/D042 
    Installation 
     
    1.12.2 INSTALLATION PROCEDURE 
     
    ƒ  Unplug the main machine power cord before starting the following 
    procedure.  
    The bridge unit (B227) and optional paper  feed unit (B800 or B801) must be installed 
    before installing this finisher (B793). 
     
    1.  Unpack the finisher and remove all tapes and packing materials from the 
    finisher.  
    						
    							 
    B230/B237/D042 1-46 SM 
     
    2.  Open the front door [A] of the 1000-sheet  booklet finisher, and then pull out the 
    jogger unit [B]. 
    3.  Remove all tapes and packing material s from the inside of the finisher. 
     
    4.  Attach the cushions [C] to the finisher.   
     
    ƒ  Make sure that the cushions are placed within 0 to 1 mm [D] from the edge of 
    the cover or frame. 
    5.  Install the ground plate [E] on the finisher (
      x 2; M3 x 8).  
    						
    							  
    SM 1-47 B230/B237/D042 
    Installation 
     
    6.  Attach the rear joint bracket [F]   
    (
    x 2, M4 x 14). 
    7.  Attach the front joint bracket [G] and the holder bracket [H] (
      x 2; M4 x 14). 
     
    ƒ  The holder bracket [H] must be placed outside the front joint bracket [G]. The 
    holder bracket is provided with the bridge unit (B227). 
     
    8.  Pull the lock lever [I] (Long knob screw x 1). 
    9.  Slowly push the finisher to the left  side of the machine, keeping its front door 
    open until the brackets [J] [K] go into their slots. 
    10.  Push the lock lever [I], and then secure it (Long knob screw x 1).   
    11.  Close the front door of the finisher. 
    12.  Connect the finisher conn ector [L] to the machine.  
    						
    							 
    B230/B237/D042 1-48 SM 
     
    13.  Install the upper output tray [M] (Short knob screw x 1). 
    14.  Install the lower output tray [N]. 
    15.  Turn on the main power switch of the machine. 
    16.  Check the 1000-sheet booklet finisher operation. 
      
    						
    All Ricoh manuals Comments (0)

    Related Manuals for Ricoh Mp C3000 Service Manual