Ricoh Mp C3000 Service Manual
Have a look at the manual Ricoh Mp C3000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 1289
SM i B801
LCIT B801
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ............................................ 1
1.1 LEFT AND RIGH T TRAY........................................................................\
...... 1
1.2 SENSORS ........................................................................\
............................ 2
1.2.1 PAPER HEIGHT SENSORS ON PAPER STORAGE SIDE................. 2
1.2.2 END FENCE HP SENSOR/ PAPER END SENSOR 2 ......................... 2
1.3...](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1288.png "Page 1289
SM i B801
LCIT B801
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ............................................ 1
1.1 LEFT AND RIGH T TRAY........................................................................\
...... 1
1.2 SENSORS ........................................................................\
............................ 2
1.2.1 PAPER HEIGHT SENSORS ON PAPER STORAGE SIDE................. 2
1.2.2 END FENCE HP SENSOR/ PAPER END SENSOR 2 ......................... 2
1.3...")
![Page 1293
Left and Right Tray
SM 1 B801
B801 LCIT
1. REPLACEMENT AND ADJUSTMENT
1.1 LEFT AND RIGHT TRAY
1. Pull the LCT drawer.
ƒ If the right tray comes up with the left tray, push the right tray into the LCT.
2. Left tray [A] (
x 2)
3. Remove the right tray [B] pressing down the stopper [C].
ƒ When reinstalling the tray, set the tray on the guide rail and carefully push the
tray in, making sure to keep the tray level.](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1292.png "Page 1293
Left and Right Tray
SM 1 B801
B801 LCIT
1. REPLACEMENT AND ADJUSTMENT
1.1 LEFT AND RIGHT TRAY
1. Pull the LCT drawer.
ƒ If the right tray comes up with the left tray, push the right tray into the LCT.
2. Left tray [A] (
x 2)
3. Remove the right tray [B] pressing down the stopper [C].
ƒ When reinstalling the tray, set the tray on the guide rail and carefully push the
tray in, making sure to keep the tray level.")
![Page 1294
Sensors
B801 2 SM
1.2 SENSORS
1.2.1 PAPER HEIGHT SENSORS ON PAPER STORAGE SIDE
1. Tray (
Left and Right Tray)
2. Rear fence [A] (
x 1)
3. Rear fence bracket [B] (
x 2)
4. Paper height sensors [C] (
x 1 each)
1.2.2 END FENCE HP SENS OR/PAPER END SENSOR 2
1. Bottom cover [D] (s x 1)
2. End fence HP sensor [E] (h x 1)
3. Paper end sensor 2 (paper storage side) [F] (h x 1)](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1293.png "Page 1294
Sensors
B801 2 SM
1.2 SENSORS
1.2.1 PAPER HEIGHT SENSORS ON PAPER STORAGE SIDE
1. Tray (
Left and Right Tray)
2. Rear fence [A] (
x 1)
3. Rear fence bracket [B] (
x 2)
4. Paper height sensors [C] (
x 1 each)
1.2.2 END FENCE HP SENS OR/PAPER END SENSOR 2
1. Bottom cover [D] (s x 1)
2. End fence HP sensor [E] (h x 1)
3. Paper end sensor 2 (paper storage side) [F] (h x 1)")
![Page 1296
Motors
B801 4 SM
1.4 MOTORS
1.4.1 TRAY LIFT MOTOR
1. Securing brackets [A] (
x 1 each)
2. Rear cover [B] (
x 2)
1. Tray lift motor [C] (
x 1, x 3)](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-1295.png "Page 1296
Motors
B801 4 SM
1.4 MOTORS
1.4.1 TRAY LIFT MOTOR
1. Securing brackets [A] (
x 1 each)
2. Rear cover [B] (
x 2)
1. Tray lift motor [C] (
x 1, x 3)")
Read This First Safety and Symbols Replacement Procedure Safety ƒ Turn off the main power switch and unplug the machine before beginning any of the replacement procedures in this manual. Symbols Used in this Manual This manual uses the following symbols. : See or Refer to : Screws : Connector : Clip ring : E-ring
Left and Right Tray SM 1 B801 B801 LCIT 1. REPLACEMENT AND ADJUSTMENT 1.1 LEFT AND RIGHT TRAY 1. Pull the LCT drawer. ƒ If the right tray comes up with the left tray, push the right tray into the LCT. 2. Left tray [A] ( x 2) 3. Remove the right tray [B] pressing down the stopper [C]. ƒ When reinstalling the tray, set the tray on the guide rail and carefully push the tray in, making sure to keep the tray level.
Sensors B801 2 SM 1.2 SENSORS 1.2.1 PAPER HEIGHT SENSORS ON PAPER STORAGE SIDE 1. Tray ( Left and Right Tray) 2. Rear fence [A] ( x 1) 3. Rear fence bracket [B] ( x 2) 4. Paper height sensors [C] ( x 1 each) 1.2.2 END FENCE HP SENS OR/PAPER END SENSOR 2 1. Bottom cover [D] (s x 1) 2. End fence HP sensor [E] (h x 1) 3. Paper end sensor 2 (paper storage side) [F] (h x 1)
Changing the Tray Size SM 3 B801 B801 LCIT 1.3 CHANGING THE TRAY SIZE 1. Remove the fence screws ( x 5). 2. Change the position of the fences. ƒ Before fastening the screws, set paper in the tray.
Motors B801 4 SM 1.4 MOTORS 1.4.1 TRAY LIFT MOTOR 1. Securing brackets [A] ( x 1 each) 2. Rear cover [B] ( x 2) 1. Tray lift motor [C] ( x 1, x 3)
Motors SM 5 B801 B801 LCIT 1.4.2 TRAY MOTOR 1. Rear cover ( Tray Lift Motor) 2. Tray motor [A] ( x 1, x 2) ƒ When installing the tray motor, make sure that the gear of the tray motor holds the timing belt [B].
Main Board B801 6 SM 1.5 MAIN BOARD 1. Rear cover ( Tray Lift Motor ) 2. Main board [A] (All s, x 2, snap x 2)
Clutches SM 7 B801 B801 LCIT 1.6 CLUTCHES 1.6.1 STACK TRANSPORT CLUTCH 1. Rear cover ( Tray Lift Motor) 2. Stack transport clutch [A] ( x 1, x 1) 1.6.2 PAPER FEED CLUTCH 1. Rear cover ( Tray Lift Motor) 2. Paper feed gear unit [A] ( x 3, x 1) 3. Paper feed clutch bracket [B] ( x 1, x 2, bushing x 1) 4. Paper feed clutch [C]
Paper Feed Unit B801 8 SM 1.7 PAPER FEED UNIT 1. Right cover [A] 2. Open the vertical guide plate [B] 3. Guide plate [C] 4. Pull the LCT drawer [D]. 5. Paper feed unit [E] ( x 2 x 1)