Ricoh Mp C3000 Service Manual
Have a look at the manual Ricoh Mp C3000 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 896
B230/B237/D042 6-76 SM
6.13.2 DUPLEX DRIVE
The duplex inverter motor [A] drives the following:
ƒ Duplex inverter roller [B]
The duplex/bypass motor [C] drives the following:
ƒ Duplex transport roller 1 [D]
ƒ Duplex transport roller 1 [E]
ƒ Duplex transport roller 1 [F]
The duplex entrance sensor [G] and duplex exit sensor [H] control the interleave movement
and detect paper jams.](http://img.usermanuals.tech/thumb/64/98663/w64_mp-c3000-service-manual-1509271621_d-895.png "Page 896
B230/B237/D042 6-76 SM
6.13.2 DUPLEX DRIVE
The duplex inverter motor [A] drives the following:
ƒ Duplex inverter roller [B]
The duplex/bypass motor [C] drives the following:
ƒ Duplex transport roller 1 [D]
ƒ Duplex transport roller 1 [E]
ƒ Duplex transport roller 1 [F]
The duplex entrance sensor [G] and duplex exit sensor [H] control the interleave movement
and detect paper jams.")
SM 6-81 B230/B237/D042 Detailed Descriptions NVRAM : 128 KB for the machine parameters, logged data and a record of the number of pages printed for each “User Code”. Network Interface : 100BASE-TX/10BASE-T USB Interface: USB2.0 IEEE 1394 Interface (option) : Supports a data transfer speed of up to 400 Mbps. IEEE 1284 Interface (option) : This is a parallel printer port. IEEE 802.11b (option) : This lets you connect the machine to a wireless network. Bluetooth (option) : This lets you connect the ma chine to a Bluetooth network. USB Host (option) : This is for the connection of an external device (digital camera etc.). I/F Slot Item Slot A IEEE 1394 or USB Host Slot B IEEE 1284 or IEEE 802.11b or Bluetooth Slot C File format converter HDD: 3.5” HDD (40 GB) can be connect ed using the IDE interface. SD Card slots : ƒ Slot 1: Boot SD card (standard printer/scanner application SD card) ƒ Slot 2: Optional application (for PostScri pt 3, Data Overwrite Security Unit or PictBridge) ƒ Slot 3: Firmware upgrade or Browse r Unit (RDS – Ricoh Document Server)
B230/B237/D042 6-82 SM 6.14.2 HARD DISK Overview The capacity of the hard disk is 40 GB. The controller partitions it into several drives and allocates them for different functions. You c an initialize these partitions as necessary ( SP5-832). The table lists the contents of the hard disk. Contents Capacity (MB) Volatile/ Nonvolatile Initialization (SP5-832) 18,340 Nonvolatile Images (IMH) 12,844 Volatile 002 Thumbnails 2400 Nonvolatile 003 Job Logs 200 Nonvolatile 004 Printer fonts 500 Nonvolatile 005 User information 300 Nonvolatile 006 Mail RX data 200 Nonvolatile 007 Mail TX data 1,000 Nonvolatile 008 Designer data 512 Nonvolatile 009 Logs 150 Nonvolatile - Net interfaces 500 Nonvolatile 011 Volatile: The data is lost when you turn the main switch off. Nonvolatile: The data is not lost w hen you turn the main switch off. 6.14.3 CONTROLLER FUNCTIONS Sample Print This feature was formerly known as “Proof Print.” This f unction gives users a chance to check the print results before star ting a multiple-set print run. ƒ The size of the hard disk partition for the sa mple print feature is 16.8 GB. This partition is also used by the collation and locked print features. ƒ The partition can hold up to 100 files, including files stored using locked print. ƒ The partition can hold a l og containing up to 30 errors, excluding jobs stored using
SM 6-83 B230/B237/D042 Detailed Descriptions locked print. ƒ The maximum number of pages is 2,000, including jobs using locked print and collation. Locked Print Using this feature, the print job is stored in the machine but w ill not be printed until the user inputs an ID and a password at the machine’s operation panel. These ID and password must match the ID and password that has been input with the printer driver. ƒ Stored data is automatically deleted after it is printed. ƒ Stored data can be manually deleted at the operation panel. ƒ The partition can hold up to 100 files, including files stored using sample print. ƒ The partition can hold a l og containing up to 30 errors, excluding logs stored using locked print. ƒ The maximum number of pages is 2,000, including jobs using sample print and collation. ƒ Locked print uses the same hard disk partit ion (16.8 GB) as sample print and collation. Hold Print Using this feature, the print job is stored in the machine but w ill not be printed until the user inputs an ID at the machine’s operation panel. This ID must match the ID that has been input with the printer driver. ƒ Stored data is automatically deleted after it is printed. Stored Print/ Store and Print Using this feature, stored files can be printed repeatedly wit hout PC operation. Stored files can also be printed while the controller is rece iving files, even if the file data has not been completely received. 6.14.4 JOB SPOOLING Print data can be spooled (stored) in the machine’s HDD, and the machine starts to print when data transfer is complete. Since the machi ne stores all data first before printing, the host computer is freed up more quickly. ƒ The supported print protocols are IPP and LPR. ƒ The default setting for this feature is “off ”. The user must switch it on using UP mode to enable this feature. ƒ The size of the HDD partiti on for job spooling is 1 GB. ƒ The partition can hold up to 150 jobs.
B230/B237/D042 6-84 SM Related SP Modes Job spooling can be turned on and off using the SP mode (SP5-828-069) for each protocol. The machine does not spool jobs when job spoo ling is switched off with the SP mode, even when the customer switches it on with the user mode. Paper Source Selection Tray Priority (Auto Tray Select) The “Tray Priority” setting determines the start of the tray search when the user selects “Auto Tray Select” with the driver. The mach ine searches paper trays for the specified paper size and type. When no tray contains paper t hat matches the paper size and type specified by the driver, the controller stops printing until t he user loads the correct paper. The “Tray Priority” setting can be s pecified in the following menu: > System Settings > Tray Paper Settings > Paper Tray Priority: Printer. ƒ The by-pass feed table is not part of the tray search. Tray Locking If “Tray Locking” is enabled for a tray, the controlle r skips the “locked” tray in the tray search process. The “Tray Locking” setting can be specified in the following menu: > System Settings > Tray Paper Settings > Paper Type: Tray # > Apply Auto Paper Select (where the “#” indicates the tray number). The by-pass feed table cannot be unlock ed (Tray Locking is always enabled). Manual Tray Select If the selected tray does not have the paper size and type specified by the driver, the
SM 6-85 B230/B237/D042 Detailed Descriptions controller stops printing until the user loads the correct paper. Auto Continue Overview When this function is enabled, t he machine waits for a specified period (0, 1, 5, 10, 15 minutes) for the correct paper size and type to be set in the tray. If the timer runs out, the machine starts printing, even if there is no paper tray which matches the paper size and paper type specified by the driver. The machine searches for a paper tray in the following way: ƒ The interval can be set with the following menu: > Printer Features > System > Auto Continue. ƒ The default setting for this feature is “Off.” Auto Tray Select When there is no paper tray that matches the paper size and type specified by the driver, the machine searches for any tray that has paper, and prints from the first tray it finds. The start of the tray search is the tr ay selected as the priority tray. Manual Tray Select The machine prints from the selected tray ev en if the paper size and type do not match the setting specified from the driver. If “Auto Continue” is disabled, the machine waits until the user loads the correct paper in the tray.
B230/B237/D042 6-86 SM 6.15 PICTBRIDGE 6.15.1 GENERAL FUNCTION The PictBridge function can make a PictBridge-standard DSC (Digital Still Camera) connect with the machine usi ng a USB cable. As a result, photographs in the DSC can be printed directly with a machine t hat has the PictBridge application. Photo image format ƒ Exif/JPEG ƒ JFIF ƒ TIFF/MMR (Ricoh cameras only) ƒ It is possible to connect more than one DSC at the same time, but it is only possible to print from one DSC. If more than one DSC is connected, you can only print from the first DS C that was connected. 6.15.2 PRINTING FUNCTION LIST Name Requirement for PictBridge Standard AT- C 1 Single image printing Must Available Selected image printing Must Available DPOF printing Recommended Not available All image printing Must Available Index printing Recommended Available Trimming Recommended Available Multiple number printing Must Available Date and file name printing Recommended Available Paper size Must Available Image print size Recommended Available Multi-Image-Layout (N-up) Recommended Available
SM 6-87 B230/B237/D042 Detailed Descriptions Edge-to-edge borderless printing Recommended Not available Printing quality Optional Available Color matching Optional Available Paper type specification Optional Available Form printing Ricoh Available Camera memo printing Ricoh Available 6.15.3 PRINTING FUNCTION DESCRIPTION Single image printing This function can print an image displayed on the DSC. The image is enlarged and rotated to match the paper, but the im age aspect ratio is not changed. Selected image printing This function can print two or more images selected from the display on the DSC. If landscape and portrait images are mixed in one job, the paper feed direction is fixed following the first image direction. DPOF (Digital Print Order Format) printing This function is not available in this machine. All image printing This function can print all images in the DSC.
B230/B237/D042 6-88 SM Index printing This function can print all images as thumbnail photos with index format. The size of the photos is fixed at 20 mm x 20 mm. Paper Size Number of Photos A3 192 16 x 12 A4 96 12 x 8 A5 40 8 x 5 Letter 80 10 x 8 B4 140 14 x 10 ƒ Some digital cameras have a limitati on on the maximum number of photos in a print job. If the number of photos in a page is more than the maximum photo number in a job, a form feed may be inserted between the thumbnail photos. Trimming This function can print a part of an image by specifying a clip area. Multiple number printing This function can print multiple images from the same image according to ordered number and layout. If the photos are printed with a mu ltiple number printing function, and there are an odd number of photos in a page, the photo will not be printed. ƒ If a layout is not selected (like 2 up or 4 up for example), each image will be printed on one page. Example 1 : Photo A: 2, Photo B: 3 with 4-up printing In this case, Page 2 will not be printed. Example 2 : Photo A: 2, Photo B: 4 with 2-up printing
SM 6-89 B230/B237/D042 Detailed Descriptions In this case, all photos will be printed. Date and file name printing This function can impose a date stamp and file name under each image. A data stamp and file name are imposed in the following style: ƒ Position: It is centered under each image. ƒ Font color: Black ƒ Font type: Arial ƒ Font size: 6 pt to 16 pt depending on printing size Image print size (Fixed size printing) [A]: Specified printing size, [B]: Paper This function can print images with the size specified on the camera. ƒ The image is enlarged to match the specified size. ƒ The image is not rotated. ƒ The image aspect ratio is not changed. ƒ If the specified aspect ratio is different from the image aspect ratio, the image aspect ratio is automatically adjusted to the specified aspect ratio even this deletes part of the image. ƒ If the new ratios of height and width magnification are different, the larger magnification ratio is used to adjust t he image to the specified printing size. ƒ An error occurs if the specified size is larger than the actual paper size.
B230/B237/D042 6-90 SM 3.25” x 2.5” 8cm x 6cm 5” x 2.5” 10cm x 7cm 6” x 4” 13cm x 9cm 7” x 5” 15cm x 10cm 10” x 8” 18cm x 13cm 254mm x 178mm 21cm x 15cm 110mm x 74mm 24cm x 18 89mm x 55mm 148mm x 100mm Multi-Image-Layout (N-up) This function can print multiple images on the specified paper. The number and arrangement of images can be specified as shown in the following list. Number of images Vertical x Horizontal images Paper direction 2 2 x 1 Portrait 4 2 x 2 Landscape 8 4 x 2 Portrait 9 3 x 3 Landscape