Panasonic Dbs 824 Instructions Manual
Have a look at the manual Panasonic Dbs 824 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
FF9FF Key Copy FF Key Copy Software-Version CPC-S and CPC-M, Version 1 0 and higherAddress FF9 3## (ExtPort)# (ExtPort)## DescriptionUse this program to copy all the attributes of one extension’s FF keys to another Copying must be done on an extension-by-extension basis The first extension port number of this address is the FF key source, and the second extension port number is the FF key target ProgrammingNote: You must enter two pound-signs (W) at the end of this address FF9 3# (1-16 or l-24)# (1-16 or I-24)#b## fz(Source) Extension Port(Target) Extension Port CPC-S 1-16 CPC-M 1 24 NotesCopying RestrictionThis program only copies the settings of FF keys that are equipped with LEDsSettings for FF keys without LEDs are not copied Clearing FF Keys Before Using the Copy ProgramBefore you copy the FF keys to an extension that is set to the defaults, you must clear the key settings of the target phone To clear key settings, use address FFS (ExtPort)# (Key)# CONF ON/OFF Setting Up FF Keys on Multiple PhonesTo set up multiple extensions with new FF key settings, use the following steps 1Clear the keys of the source phone using FF5 (ExtPort)# (Key)# 2Copy the cleared key settings to multiple target extensions using FF9 3# (SourceExtPort)# (TargetExtPort)# 3Set up the FF keys on the source phone using FF5 (ExtPort)# (Key)#4 Copy the new settings to multiple target extensions using FF9 3#(SourceExtPort)# (TargetExtPort)# Issued 3/l /95DBS 824-l O-400 9-5
10. Speed Dial Programming (FFlO)Use the FFlO program addresses in this chapter to program speed dial numbers This chapter covers the following topics TopicPageSystem Speed Dial Numbers 10-3Personal Speed Dial Numbers 1 10-5 Issued 3/l/95DBS 824-10-4001 o-1
System Speed Dial Numbers Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FFlO l# (SSD)# (PhoneNumber)# DescriptionUse this program to set up System Speed Dial (SSD) codes and their related phone numbersThe range of available SSD codes depends on the CPC card installed in your DBS 824 system and on the speed-dial mode selected (using program address FFl 2# l# 33#)In Standard mode, up to 90 SSD numbers can be programmed in Add-On mode, up to 200 SSD numbers Table 1 O-ISystem Speed Dial ranges CPC CardStandard ModeCPC-s 00-89 CPC-M00-89 Add-On Mode(not available) ooo- 199 Programming To assign a System Speed Dial number FFlO l# (SSD)# (NNNNNNNNNNNNNNNN)# ft SSD CodePhone Number Sent To CO (see Table 10-l above) (up to 16 digits) To clear a System Speed Dial number FFlO l# (SSD)# CONF ON/OFF t SSD Code Related ProgrammingSpeed Dial Mode FFl 2# l# 33#Override Toll Restriction with SSD Numbers FFl 2# l# 4# (SSD)# SSD Display Restriction FFl 2# l# 5#SSD NameDisplay FFl 2# 1# 18# (0 or l)#System Speed Dial Names FF6 2# (SSD)# issued 3/l/95DBS 824-10-400IO-3
System Speed Dial NumbersFFlO NotesSSD Number DisplaySystem Speed Dial numbers will appear on large-display telephones in alphabetical order Including Trunk Groups in an SSD NumberIf a DSS console is available for programming, you can make a trunk group part of a system speed dial number To do this, insert a “C” as the first character of the speed dial number, followed by l-4 to designate the trunk group numberThe “C” is required for an SLT to use SSDA “9” can also be used to access the pooled trunk capability DSS Key FunctionsDSS keys can be used for several different tasks in speed dial programming The keys are described in the following table Table IO-2DSS key functions in System Speed Dial programming DSS KeyFunction CONFClears entered data Forward spaces PInserts a pause CInitiates trunk group access For example “ClP5551212” will access pooled trunk group 81, then pause, and then dial 555-1212 1 o-4DBS 824-l O-400Issued 3/l /95
FFlOPersonal Speed Dial Numbers Personal Speed Dial Numbers Software VersionCPCS and CPC-M, Version 1 0 and higherAddress FFlO 2# (ExtPott)# (PSD)# (PhoneNumber)# DescriptionUse this program to set up Personal Speed Dial (PSD) codes and their related phone numbersThe range of available PSD codes depends on the CPC card installed in your DBS 824 system, and on the speed-dial mode selected (using program address FF12# l# 33#)In Standard mode, up to 10 PSD numbers can be programmed, in Add-On mode, up to 40 PSD numbers Table IO-3Personal Speed Dial ranges CPC CardStandard ModeAdd-On Mode CPC-s90-99(not available) 1 CPC-M1 90-991 900-939I Programming To assign a Personal Speed Dial number Extension Port PSD CodePhone NumberCPC-S l-16 (see Table 10-3 above)Sent To COCPC-M l-24 (up to 16 digits) To clear a Personal Speed Dial number FFlO 2# (1-l 6 or l-24)# (PSD)# CONF ON/OFF ++ Extension Port PSD Code CPC-S 1-16(see Table 10-3 above) Related ProgrammingSpeed Dial Mode FFl 2# l# 33#PSD Narne Display FF3 (ExtPort)# 17# (0 or l)#Personal Speed Dial Names FF3 (ExtPort)# (PSD)# CONF (Name)# Issued 3/l 195DBS 824-l O-4001 o-5
Personal Speed Dial NumbersFFlO NotesPSD Number Display PSD numbers appear on large-display telephones in alphabetical order DSS Key FunctionsDSS keys can be used for several different tasks in speed dial programmingThe keys are described in the following table Table 10-4DSS key functions in Personal Speed Dial programming tDSS Key Function CON-FClears entered data IBackspaces Forward spaces PInserts a pause CInitiates trunk group access For example “ClP5551212” will access pooled trunk group 8 1, then pause, andthen dial 555-1212 1 O-6DBS 824-i O-400Issued 3/l /95
Appendix A. Large-Screen DisplaysThis appendix illustrates the menu screens that can be programmed to appear during different call states (e g , when the phone is idle, during a trunk call, during an intercom call, etc ) on large-display phonesThese screens act as labels for the soft keys surrounding the LCDThe soft keys provide one- touch initiation of a feature, or one-touch access to a directory, during the callstate when the screen appears There are a total of 39 screensScreens 1 thru 24 are fixed pre-programmed screens which cannot be changedScreens 25 t.hnr 39 can be custom-designed using program addresses FFl 2# 7# l# thru 4## All of these screens can be assigned to different call states using program address FF3 (ExtPort)# (26-33)# (O-39)++Note: Some screens cannot be set to display during certain call processing operations Main MenuFF3 (ExtPort)# (26-33)# l#Personal Speed DialSystem Speed Dial FF3 (ExtPort)# (26-33)# 2#FF3 (ExtPort)# (26-33)# 3# Issued 3/l/95DBS 824-10-400A-i
Large-Screen DisplaysAppendix A Extension IndexHelp Menu 1 FF3 (ExtPort)# (26-33)# 4#FF3 (ExtPort)# (26-33)## 5# Help Menu 2Help Menu 3 FF3 (ExtPort)# (26-33)# 6#FF3 (ExtPort)# (26-33)# 7# Attendant Menu 1Attendant Menu 2 FF3 (ExtPort)# (26-33)# 8#FF3 (ExtPort)# (26-33)# 9# A-2 DBS 824-l O-400 Issued 3/l I95
Appendix ALarge-Screen DisplaysIssued 3/l /95DBS 824-l O-400 A-3