Panasonic Dbs 824 Instructions Manual
Have a look at the manual Panasonic Dbs 824 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
FFlSSD Name Display SSD Name Display Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FFl 2# 1# 18## (0 or l)# DescriptionUse this address to determine how many SSD names (5 or 10) can be displayed at a time on large-display phonesWhen 5 names are displayed (default setting), the maximum length for each name is 16 characters When 10 names are displayed, the maximum length for each name is 7 characters Programming FFl 2# 1# 18# (0 or l)# O=Displays 5 SSD names l=Displays 10 SSD names Related ProgrammingOverride TRS with SSD Ntibers F’Fl 2# l# 4#SSD Display Restriction F’Fl 2# l# 5#System Speed Dial Names F’F6 2# (SSD)#System Speed Dial Numbers FFlO l# (SSD)#
APVSLT AssignmentFFl APVSLT Assignment Software VersionCPC-S and CPC-M, Version 1 0 and higher CPC-M Only (future)Address FFl 2# 1# 19# (ExtPort)# DescriptionThis program is reserved for future 3rd-party applications with the CPC-M card, and currently has no effect on the DBS 824 system, regardless of its settingPage 1-24 DBS 824- 1 O-400Issued 3/l /95
FFlVoice Mail Busy Tone Voice Mail Busy Tone Software VersionCPC-S and CPC-M, Version 1 0 and higher Address FFl 2# l# 20## (0 or l)# DescriptionThe DBS 824 can be set to send either silence (default) or a busy tone to avoice-mail port at the conclusion of a call Programming FFI 2# l# 20## (0 or l)# t O=Silence, l=Busy tone Issued 3/l 195DBS 824-l O-400Page 1-25
Delayed RingFFl Delayed Ring Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FFl 2# 1# 21# (0 or l)# DescriptionThis address determines if delayed ringing is allowed for CO trunksDelayed ringing is an automatic transfer of unanswered calls -- if an incoming call is not answered at one extension, the system will send the call to another extension (the first extension will cease ringing) Programming I FFl 2# l# 21# (0 or l)# t O=Delayed ringing is disabled l=Delayed ringing is enabled Related ProgrammingCO Delayed Ring Timer FFl 3# 22# (0- 15)##CO Delayed Day Ring AssignmentsFF4 5# (ExtPort)# (Trunk)#CO Delayed Day Ring Assignments for Hunt GroupsFF4 5# (HuntGrp)# (Trunk)#CO Delayed Night 1 Ring AssignmentsFF4 6# (ExtPort)# (Trunk)#CO Delayed Night 1 Ring Assignments for Hunt GroupsFF4 6#(HuntGrp)# (Trunk)#CO Delayed Night 2 Ring AssignmentsFF4 9# 2# (ExtPort)# (Trunk)++CO Delayed Night 2 Ring Assignments for Hunt GroupsFF4 9# 2# (HuntGrp)# (Trunk)#Page l-26 DBS 824-l O-400Issued 3/l /95
FF1Second Attendant PositionSecond Attendant Position Software VersionWC-S and CPC-M, Version 1 0 and higherAddress FFl 2# l# 22# (10%699)# DescriptionThis address assigns a key phone as the second attendant position The next two addresses F;l 2# l# 23# and FFI 2# 1# 24#) can be used to assign third and fourth attendant positions When all line appearances at the first attendant are busy, calls will transfer in sequence to the second, third, and fourth attendants If all line appearances are busy on all attendants, calls will transfer to the Attendant Transfer Extension (if assigned) Programming To assign a second attendantr FFl 2# l# 22# (101 to 699)# ! Extension Number (10 I-699) (Default=lOl) To clear the second attendant position r---FFl 2# l# 22# CONF ON/OFFI Related ProgrammingThird Attendant Position FFl 2# l# 23# (lOl-699)#Fourth Attendant Position FFl 2# l# 24# (lOl-699)#Attendant Transfer Extension FFl 2# l# 25# (lOl-699)# NotesProgramming Restrictions When Extensions Are Not InstulledAn extension must be installed at the port assigned as the second attendant before the second attendant can be clearedLikewise, an extension cannot be programmed as a second attendant unless it is physically assigned Issued 3/l/95DBS 824-l O-400Page l-27
Third Attendant PositionFFl Third Attendant Position Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FFl 2# 1# 23## (1019699)# DescriptionThis address assigns a DBS 824 key phone as the third attendant position The previous and following addresses (FFl 2# l# 22# and FFl 2# l# 24#) can be used to assign second and fourth attendant positions When all line appearances at the first attendant are busy, calls will transfer in sequence to the second, third, and fourth attendants If all line appearances are busy on all attendants, calls will transfer to the Attendant Transfer Extension (if assigned) Programming To assign a third attendant I----FFl 2# l# 23# (101 to 699)# t Extension Number (10 l-699) @efault=No third attendant assigned) To reset the third attendant position to the default value IFFl 2# 1# 23# CONF ON/OFFI Related ProgrammingSecond Attendant Position FF 1 2# l# 22# (lOl-699)#Fourth Attendant Position FFl 2# l# 24# (lOl-699)#Attendant Transfer Extension FFl 2# l# 2% (lOl-699)# NotesProgrumming Restrictions When Extensions Are Not InstalledAn extension must be installed at the port assigned as the third attendant before the third attendant can be clearedLikewise, an extension cannot be programmed as a third attendant unless it is physically assigned Page l-28DBS824-10-400Issued 3/l/95
FFlFourth Attendant Position Fourth Attendant Position Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FFl 2# 1# 24# (1019699)# DescriptionThis address assigns a DBS 824 key phone as the fourth attendant position The previous two addresses (FFl 2# l# 22# and FFl 2# l# 23#) can be used to assign second and third attendant positions When all line appearances at the fust attendant are busy, calls will transfer in sequence to the second, third, and fourth attendants If all line appearances are busy on all attendants, calls will transfer to the Attendant Transfer Extension (if assigned) Programming To assign a fourth attendant Extension Number (10 l-699) @efault=No fourth attendant assigned)I To reset the fourth attendant position to the default value IFFl 2# l# 24# CONF ON/OFFI Related Programming Second Attendant PositionFFl 2# I# 22# (lOl-699)#Third Attendant Position FFl 2# l# 23# (lOl-699)# Attendant Transfer Extension FFl 2# 1# 25# (lOl-699)# NotesProgramming Rest&ions When Extensions Are Not InstalledAn extension must be installed at the port assigned as the fourth attendant before the fourth attendant can be clearedLikewise, an extension cannot be programmed as a fourth attendant unless it is physically assigned Issued 3/l/95DBS 824-l O-400Page l-29
Attendant Transfer ExtensionFFlAttendant Transfer Extension Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FFl 2## l# 25# (lOl-699)# DescriptionAddresses FFl 2# l# 2# through FFl 2# l# 26# can be used to assign second, third, and fourth attendantsWhen all line appearances at the first attendant are busy calls will transfer to the second, third, and fourth attendants in sequenceIf all line appearances are busy on all attendants, calls will transfer to the extension assigned in this address ProgrammingTo assign an attendant transfer extension FFl 2# l# 25## (101 to 699)# t Extension Number (101-699) (Default=No transfer extension assigned) To reset the attendant transfer extension to the default value IFFl 2# l# 25# CONF ON/OFFI NotesPilot Number Restriction The ovefflow position must be an installed extension, it cannot be a hunt group pilot numberPage l-30DBS 824-l O-400Issued 3/l /95
FFlAttendant Uvernde Software VersionCPGS and CPC-M, Version 1 0 and higher41Address FF12# 1# 26# (0 or l)# DescriptionThe Attendant Ovenide feature allows an attendant phone to “barge into” a call on a busy extension, whether the extension is engaged in an intercom call or a CO call When a barge-in occurs all three parties can hear and talk to each otherAttendant Override if the Attendant Override feature is enabled (default setting) the attendant can barge into an extension, even if the extension has been programmed to block barge-ins Programming O=Disables Attendant Override l=Enables Attendant Override Related Programming Alert Tone for Busy Override & OWAFFl 2# l# 16# issued 3/l/95DES 824-10-400Page1-31
Extension (BLF) Delayed RingFFl Extension (BLF) Delayed Ring Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FFl 2## l# 27# (0 or l)# DescriptionThis program determines if delayed ringing is allowed for intercom calls Delayed ringing is a call-forwarding feature for unanswered calls -- if an incoming call is not answered at one extension, the system will send the call to another extension NOTE: The extension to which the call is forwarded must have a DSS/BLF key Programming FFl 2# l# 27# (0 or l)# f O=Delayed ringing is off l=Delayed ringing is on Related Programming Extension Delayed Ring TableFF4 8# (TargetExPort)# (SourceExtPort)# (0 or l)# Extension Delayed Ring TimerFFl 3# 23# (0-15)#Call Forward-No Answer Timer FFl 3# 17# (0-15)# Page1-32DBS 824-10-400Issued 3/l/95