Panasonic Dbs 824 Instructions Manual
Have a look at the manual Panasonic Dbs 824 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SpecificationsCabling Specifications Table 6 9Marimum cabling distances- Loop Type and ResistanceKey phone, EM/24 DSSl72 SLT100 OhmsI 22OPX (Loop between the DBS 824 and the OPX Adaptor) OPX (Loop between the OPX Adaptor and an SLT) Doorphone (Loop between the DBS 824 and the Door-phone Adaptor) Door-phone (Loopbetween the Doorphone Adaptor and the Door-phone) Voice Announce Unit Resistance Cable Gauge (AWG) Maximum Cabling Length in Feet (Distance from the DBS 824) 40 OhmsI 221 1239 I 241 779 20Ohms22619 24390 26245 241948 261225 10Ohms22309 24194 26122 900 OhmsI 221 27877(excluding end 24 17532 impedance)2611025 10 Ohms22309 24194 1 122 40 Ohms221239 24779 26490 10Ohms22309 24194 1 26( 122 Issued 3/l/95DBS 824-10-3006-9
SpecificationsCommunication ParametersTable 6 10 Voice path from KTELs to DBS 824 ChannelSpeed Overall communications path D-channel data B-channel data 256 kbps 16 kbps 64 kbps J Table 6-11 Da& communications portsPort SMDRParameters Interface Baud rate ParityRS232-C 300,120O 4800 or 9600 kbps Even, odd, or none Stop bit length1 1, 1 5, or 2 Data bit length 5,6,7, or 8 Signaling Characteristics Table 6-12 Signaling ~II CO Ztem Dial pulse Break ratio Minimumpause Trunk startSpecification 8 to 11 pulses per second (PPS) 58 to 64% 07to10seconds Loop Table 6-13 Signaling levels ItemTrunk input (DISA)Level-40 dBm (minimum)-Distortion Less than 10% 6-10DBS 824-l O-300Issued 3/l /95
SpecificationsTable 6 14 Transmission specifications ItemImpedance - Over1 oad levelInsertion Loss CO trunk to analog station Analog station to CO trunk CO trunk to digital station Digital station to CO trunk Digital station to digital station Digital station to analog station Analog station to digital station Analog station to analog station Specification 600 Ohms 600 Ohms OdB OdB OdB OdB6dB 6dB 6dB 6dB issued 3/l/95DBS 824-10-3006-11
Specifications Tone Characteristics Table 6-1.5 Tone Phn rpTone Namej Frequency/ Timing (seconds) I--CO Call Tones 1 CO incoming call 1 550/400 Hz at 16 Hz 1 Programmable Hold recall 550/400Hz at16Hz05on/35off Transfer recall 550/400Hzat16Hz05on/35off Trunk queuing 550/400Hz at16Hz05 on/O 5 off/O 5 on/2 5off CO offhook signal550 Hz1 on/7 offInternal Tones (Key Phones) Dial tone 350/440 HzContinuousCO incoming call 5501400 HzProgrammable Callback 400 Hz1on/3 off Busy480/620Hz05 on/O 5 off -Busv override400 Hz025 on/O 25 off/O 25 on 1 Splash1 550 Hz1 05onError Reminder call 400Hz 550 Hz05on/O5off 4 on/l off/4 on/l off/4on 1 off/4 on/silenceI Callwaiting/550Hz1025on/O25off/O25on/725off Key pressII 1kHzDuration of the key press 1 Internal Tones (SLTs)CO/Station ringing 20 HzHold recall Callback Transfer 20 Hz1 on/3 offProgrammable 1 Dial tone1 350/440 Hz I continuousRinging 3501440Hz1on/3 off Busy 480/620Hz05 on/O 5off 6-l 2 DBS 824-l O-300Issued 3/l I95
Specifications Table 6 I6 DTMF frequencies Digit 1 2 3 4 5 - Frequency (Hz) 697+1209 697 +1336 697 +1477 770+1209 770+1336 - 6770-I-1477 7852+1209 8852+1336 9852 + 1477 *941+1209 0 941 +1336 #941 +1477 Issued 3/l /95DBS 824-l O-3006-l 3
Index A Analog Extensions 4- 1 I BBackground music 5-8 Battery backupcapacities 6-3 installation 3-9 C Cabinet Installation 3- 1Cabinet installation batteries 3-9 cards 3-6DSLT wail mounting 5-4 grounding 3-5 initialization 3-l 1key phone wall mounting 5-3 system initialization 3- 11wall mounting 3-3 Cabling distances 6-9 Card installation 3-6Configurations 2-4 Connector locations 2 3 Cover removal 3-3 CPCdescription 2-6 RAMCLEAR 3-11 RAMHOLD 3- 11 strap J3 3-7 SW1 3-11variable resistors 5-9 DDigital Extensions 4-8 Door box adaptor 5-28 Door phone 5-28 DSLTswall mounting 5-4 DSS 4-8 DSS/72 4-8 DTMF frequencies 6- 13 EEM/24 4- 10 Environmental requirements 6 3 Extensions analog 4- 11 connectors 4-5digital 4-8 pinouts 4-6 External ringer 5- 19 FFacility interface code l-2 FCC registration number l-2Frequencies DTMF 6- 13 G Grounding 1-4, 3-5 HHeat generation 6-3 I Initialization system 3-l 1Input power 6-3 Installation cabinet 3- 1 LLightning protection l-4 Loop-start trunks 4-5 MModel number l-2 Music on-hold 5-8 NNetwork interface code l-2 0 Option Port Line 5- 11 Issued 3/l/95DBS 824-10-300Index-l
OPX 5-13 P Paging 5- 16Part Numbers VB-43320 4-8 Part numbers VA-43703 5-22 VB-42050 1-2 VB-42450 2-6 VB-4245 1 2-6 VB-4265 1 4-3 VB-427 12 5-6 VB-43 130 3-9 VB-43702 5- 13VB-43703 5-22 VB-43705 5-28 VB-43708 5-24 VB-437 11 5-28PCAS 5-6 PFU 5-22 Power consumption 6-3 Power failure unit 5-22 Pnnted clrcult cards card mstallation 3-6 descnptlons 2 5 maxlmums 2-5 R ReBstration number I-2 Reqmrements l- 1 Rmger eqmvalence number l-2 S Serlat Interface Unit 5-6 Service order code l-2Single Lme Telephone Adaptor 4- 11 Single Lme Telephones 4- 11 SLTA 4- 11 SLTs 4-11 SMDR 5-6Specifications backup batteries 6-3 cabling distances 6-9 commumcatlons parameters 6-10 dimensions and weight 6-4DTMF frequencies 6- 13 environmental requuements 6-3 feature-related capacmes 6-5 hardware maxImums 6-7 heat generauon 6-3mput power 6-3 power consumption 6-3signaling 6- 10 tone plan 6- 12 trunk and line capaclhes 6-4 T Tone plan 6- 12Trunks maximums 6-4 Trunks and lines 4- 1 UUNA device 5-19 V VA-43703 5-22VAU 5-24 VB-42450 2-6 VB-4245 1 2-6VB-4265 14-3 VB-42712 5-6 VB-43 130 3-9 VB-43320 4-8 VB-43702 5- 13VB-43703 5-22 VB-43705 5-28 VB-43708 5-24 VB -437 11 5-28 Voice Announce Umt 5-24 WWall mountmg cabmets 3-3 DSLTs 5-4 key phones 5-3 Index-2DBS 824-10-300Issued 3/l/95
---u----------mw--- mamaa Digital Business SystemSection 400 Programming DBS 8 Dot Part No 550X04701
The contents of this manual are subject to change without notice and do not constitute a commitment on the part of Panasonic Communications & Systems Company (PCSC) Every effort has been made to ensure the accuracy of this document However, due to ongoing product improvements and revisions, Panasonic cannot guarantee the accuracy of printed material after the date of publication nor can it accept responsibility for errors or omissions Panasonic will update and revise this document as needed The software and hardware described in this document may be used or copied only in accordance with the terms of the license pertaining to said software or hardware Reproduction, publication, or duplication of this manual, or any part thereof, in any manner, mechanically electronically, or photographically, is prohibited without permission of the Panasonic Communications & Systems Company (PCSC) @Copyright 1995 by Panasonic Communications & Systems Company All rights reserved
Contents Introduction to DBS 824 Programming Before You BeginIntro-3Preparations for Programming Intro-3Initializing New SystemsIntro-4 Understanding FF Key ProgrammingIntro-5Program Structure Intro 5How to Enter the Programming Mode Intro-6Example Programming Entry Intro-7 Default Program SettingsIntro-8 Chapter 1. System Programming (FFI) Date and Time SettingsDay/Date Setting Time Setting General System SettingsCall Duration Display SMDR Start Timer for CO Calls Least Cost Routing (LCR) Access Override Toll Restriction With SSD Numbers SSD Display Restriction Auto Flash Redial One Touch Dial Onhook Transfer Key Bank Hold Non-Appearing Trunk Hold SLT Flash Control Extension Number Digits Attendant Intercom Calling Extension Intercom Calling Alert Tone for Voice Calls Alert Tone for Busy Override & OHVA System Installation Area Code SSD Name Display APVSLT Assignment Voice Mail Busy Tone Delayed Ring Second Attendant Position 1-3l-3 l-4 l-5l-5 l-6 l-7 l-8 l-9 l-10 l-11 1-12 1-13 1-14 1-15 1-17 1-18 1-19l-20 1-21l-22 l-23 l-24 1-25l-26 l-27 issued 3/i /95DBS 824-l O-400Contents-l