Panasonic Dbs 824 Instructions Manual
Have a look at the manual Panasonic Dbs 824 Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Prime Line Pickup Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 11# (0 or l)# DescriptionThis feature allows the user to automatically pick up a trunk assigned to the FFI key by simply picking up the receiver If the FFl key is a pooled trunk key, an available trunk is accessed in numerical order from the highest trunk number assigned to the key to the lowest. ProgrammingFF3 (1-16 or l-24)# 11# (0 or l)# t Extension PortO=OffCPC-S 1-16 l=OnCPC-M 1-24 NotesProviding for Intercom CallingIf this feature is enabled, intercom calls cannot be made from the extension unless an intercom call key is assigned to another FF key3-14DBS 824-10-400Issued 3/l/95
FF3Auto Pickup (Ringing Line) Auto Pickup (Ringing Line) Software VeisionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 12# (0 or l)# DescriptionUse this program to enable the ability to pick up the receiver at a ringing extension and connect an incoming CO line call, hold recall or transferred Cdl ProgrammingFF3 (1-16 or l-24)# 12# (0 or l)#tt Extension Port O=Disable Au to PickupCPC S 1-16 l=Enable Auto Pickup CPC-M l-24 Issued 3/l /95DBS 824-l O-4003-l 5
Unsupervised ConferenceFF3Unsupervised Conference ;-Software VersionCPC-S and CPC-M, Version 1 0 and higher Address FF3 (ExtPort)# 13# (0 or l)# DescriptionThis feature enables an extension user to initiate a three-party conference between two trunks and the extension Once the conference is initiated, the extension user can drop out of the call by pressing either of the trunk keys used to call the other parties Programming FF3 (l-16 or l-24)# 13# (0 or l)# ff Extension PortO=The extension cannot initiateCPC-S 1-16 a three-party conferenceCPC-M 1-24 l=The extension can initiate a three-party conference Related ProgrammingUnsupervised Conference Timer FFl 3# 9# (0-1.5)#Unsupervised Trunk Conference FF2 (Trunk)# 16# NotesRe-entering a Three-Party ConferenceThe user can re-enter the conference by pressing either of the two CO trunk keys used to initiate the conference Interaction with Auto PauseIf the DBS 824 is behind a PBX, “Automatic Pause for PBX Line” (FF2# Trunks 13#) cannot be used if the Conference feature is enabled3-16 DBS 824-l O-400issued 3/l /95
FF3Station Message Detail Recorder (SMDR) Station Message Detail Recorder (SMDR) Report Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 14## (0 or l)# DescriptionAny extension can be removed from the SMDR report, so that call activityfrom that port will not be recorded Programming IFF3 (l-16 or I-24)# 14## (0 or l)# ftExtension Port O=The extension is not included in the CPC-S 1-16SMDR report CPC-M l-24 l=The extension is included in the SMDR report Related ProgrammingSMDR Display Start limer for CO Calls FFl 2# l# 2# (0 or l)# NdtesChecking Communication ParametersWhen you set this option, also check the communications parameters in programs FFl 2# 2# 1# through 9# issued 3/l /95DBS 824-l O-4003-17
Offhook Signal VolumeFF3 Offhook Signal Volume Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 15# (0-4)# DescriptionOffhook signaling volume can be set to five different levels Programming 1FF3 (l-16 or l-24)# 1% (0-4)# ttExtension Port O=Lowest volume levelCPC-s 1-16 l=Next to lowest volume level CPC-M l-24 2=Next highest volume level 3=Next highest volume level 4=Highest volume level Related ProgrammingAlert Tone for Busy Override 8z OHVAFFl 2# l# 16# Offhook SignalFF3 (ExtPort)# 7# (0 or l)# Offhook Signal PatternFF3 (ExtPort)# 16# (0 or l)# NotesPower-Down RequirementIf you change the volume level in this address, the extension phone must be unplugged, then plugged back in so that the change will take effect. 3-18DBS 824-l O-400Issued 3/l /95
FF3Offhook Signal Pattern Offhook Signal Pattern Software VersionCPC-S and CPC-M, Version 1 0 and higherAddressFF3 (ExtPort)# 16# (0 or l)#DescriptionThe offhook signaling tone can be sent repeatedly or only once ProgrammingFF3 (l-16 or l-24)# 16# (0 or l)# ftExtension Port O=Repeated tone burstCPC-S 1-16 (approximately every 6 seconds)CPC-M 1-24 l=Sinnle tone burst Related Programming Offhook SignalFF3 (ExtPort)# 7# (0 or l)# Offhook Signal VolumeFF3 (ExtPort)# 15# (0 or l)#Issued 3/l 195DBS 824-l O-4003-l 9
PSD Name Display on Large-Sized LCD PhonesFF3 PSD Name Display on Large-Sized LCD Phones Software VersianCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 17# (0 or l)#Description The large-screen phone can show either 5 or 10 personal speed dial names, depending on this settingProgramming FF3 (l-16 or l-24)# 17# (0 or l)# t Extension PoriCPC-S 1-16 CPC-M l-240=5 PSD names display l=lO PSD names displayRelated Programming Personal Speed Dial NamesFF6 3# (ExtPort)# (PSD)# Personal Speed Dial Numbers FFlO 2# (ExtPort)# (PSD)# NotesMaximum Name LengthsWhen the lo-name option is used, the maximum length of the names is 7 charactersWith the 5name option, the names can be 16 characters long3-20 DBS 824-l O-400Issued 3/l 195
FF3Page Group ExtensionsPage Group Extensions Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# (18-25)# (0 or l)# DescriptionUse this program address to include an extension in one or more of the eight page groupsIf an extension is included in a page group, pages to that group will be heard on the extension phone’s loudspeaker Also the extension will be able to pick up calls to other extensions in the page group using the Group Call Pickup feature Programming FF3 (l-16 or l-24)# (18025)# (0 or l)# / f fExtension Port18=Page group 0O=Exclude from group CPC-S 1-16 19=Page group 1l=Include in group CPC-M l-24 20=Page group 2 2 1 =Page group 3 22=Page group 4 23=Page group 5 24=Page group 6 25=Page group 7 NotesInteraction with Group Call PickupPage groups determine which extensions can use the Group Call Pickup (70) feature Ititeraction with Busy OverridePage group 0 does not allow Busy OverrideIn other words, if an extension is a member of page group 0, it cannot be overriddenAlso, a Busy-Override-Send enabled extension can only override calls at extensions within its own page groupFor example, an extension on page group 1 cannot override calls in page group 2 Issued 3/l /95DBS 824-l O-4003-21
Display When IdleFF3 Display When Idle Software VersionCPC-S and CPC-M, Version 1 0 and higherAddress FF3 (ExtPort)# 26# (0-39)# DescriptionUse this program address to select a soft key menu to be displayed on the large-display telephone during “idle” mode ProgrammingFF3 (l-1 6 or 1-24)# 26## (O-39)# i’f Extension PortCPC-S 1-16Soft-Key Menu SelectionCPC-M l-24 (see the following table for menu selections) (see Appendix “A” for menu illustrations) Table 3-2Available menus for idle disphy Menu SelectionMenu 0No change (previous menu selection is retained) 1Main menu 2Personal speed dial 3System speed dial 4Extension index 5Help menu 1 6Help menu 2 7Help menu 3 8Attendant menu1 9 I 1 Attendant menu 2 10Attendant menu 3 11Function screen 1 (fixed) 12 13 14 15 16 17 1 Function screen 2 (fixed)i\I Functionscreen3(fixed) Functionscreen4(fixed) Functionscreen 5(fixed) Functionscreen 6(fixed) Functionscreen 7(fixed) 18 19 20 4 Functionscreen8 (fixed) Functionscreen9 (fixed) Functionscreen10 (fixed)3-22 DBS 824-l O-400Issued 3/l /95
FF3Display When Idle 21Function screen 11 (fixed) 22Function screen 12 (fixed) Related ProgrammingCustom Screen addresses FFl 2# 7# l# thru 4-# Issued 3/l /95DBS 824-l O-4003-23