NEC Xen Ipk Features And Specifications Manual
Have a look at the manual NEC Xen Ipk Features And Specifications Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 471
Features and Specifications Manual P7 – 463
Doc. No. 8201 - Release 1.0
July 2003
Privacy on All CallsP-7
FEATURE
DESCRIPTIONThe system provides complete Privacy on All Calls. A station user cannot
enter another conversation unless allowed via Barge-In or Add-On
Conference.
SYSTEM
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 1 LK5 to Allow...](http://img.usermanuals.tech/thumb/54/84301/w64_nec-xen-ipk-features-specifications-manual_d-470.png "Page 471
Features and Specifications Manual P7 – 463
Doc. No. 8201 - Release 1.0
July 2003
Privacy on All CallsP-7
FEATURE
DESCRIPTIONThe system provides complete Privacy on All Calls. A station user cannot
enter another conversation unless allowed via Barge-In or Add-On
Conference.
SYSTEM
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 1 LK5 to Allow...")
Features and Specifications Manual P7 – 463 Doc. No. 8201 - Release 1.0 July 2003 Privacy on All CallsP-7 FEATURE DESCRIPTIONThe system provides complete Privacy on All Calls. A station user cannot enter another conversation unless allowed via Barge-In or Add-On Conference. SYSTEM AVAILABILITYTerminal Type All terminals. Required Components None. OPERATING PROCEDURES SERVICE CONDITIONS Data Assignment Use Memory Block 1-8-08 [Class of Service (Station) Feature Selection 2] Page 1 LK5 to Allow (default: LED On) or Deny (LED Off) Barge-In Receive. Use Memory Block 1-8-08 [Class of Service (Station) Feature Selection 2] Page 1 LK4 to Allow (LED On) or Deny (default: LED Off) Barge-In originate. General Only the person talking may allow a third or fourth party to enter the conversation using Add-On Conference, unless the Barge-In feature is allowed at designated stations. All stations have privacy at default. RELATED FEATURES LIST Not applicable. Feature NumberFeature Name A-4 Add-On Conference B-3 Barge-In C-17 Class of Service
July 2003 NEC Business Solutions Ltd 464 – P7Privacy on All Calls Doc. No. 8201 - Release 1.0 July 2003 GUIDE TO FEATURE PROGRAMMING Order and Shortcut System Data NameMemory BlockFunction 1-8-07 Attendant Page-Line Key1-8-08 Station Page-Line Key ¶+BTSClass of Service (Station) Feature Selection 2 1-8-08 1-4, 1-5 4When the system is at default this Memory Block must be programmed for the feature to be used.
Features and Specifications Manual P8 – 465 Doc. No. 8201 - Release 1.0 July 2003 Privacy ReleaseP-8 FEATURE DESCRIPTIONPrivacy Release allows the multiline terminal user to release the privacy on an outside line by pressing a privacy release key programmed on the station. Another user can then press the same CO/PBX or CAP key to join the conversation in progress. SYSTEM AVAILABILITYTerminal Type Multiline Terminals. Required components None. OPERATING PROCEDURES 1. Press T. 2. Press Q. 3. Press the Feature Access Key. 4. Dial B. 5. Dial 10. 6. Press T. Note:A Privacy Release Key must be assigned on the Multiline Terminal with the CO/PBX call before use 1. Press T. 2. Press Q. 3. Press the One-Touch Key. 4. Dial B. 5. Dial 10. 6. Press T. To program a Feature Access Key for Privacy Release from a Multiline Terminal: To program a One-Touch Key for Privacy Release from a Multiline Te r m i n a l :
July 2003 NEC Business Solutions Ltd 466 – P8Privacy Release Doc. No. 8201 - Release 1.0 July 2003 1. Lift the handset or press P. 2. Press the CO/PBX Line key or CAP key that released privacy. 1. Press the flashing line key or dial trunk access code for the trunk. SERVICE CONDITIONSData Assignment Use Memory Block 2-05 (Line Key Selection) to assign Tenant-Wide or Telephone (default) Mode for each Tenant. Use Memory Block 2-06 (Line Key Selection for Tenant Mode) to assign CO/PBX trunks to the applicable Tenant Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to assign Feature Access Key (Page 1 LK6). Restrictions Privacy Release is only available on an Outside line. Only two additional stations can be added per CO/PBX call after Privacy Release. After two parties have joined the conversation, the Conf key LED at all stations that did not enter is turned off. A third station that tries to enter receives a busy signal. If the originating caller abandons the call, the user cannot enter the call again. If there internal stations are connected to the CO/PBX, Privacy Release cannot be activated again until both added stations release the CO/PBX line. A maximum of 16 Privacy Release calls are available. Voice Over is prohibited to a station that has activated Privacy Release. When a station is receiving Voice Over, activating Privacy Release is ignored and Voice Over continues. Privacy Release and Live Record are not allowed at the same time. Privacy Release cannot be used on Single Line Telephones. Setting one feature will automatically cancel the other. Specified CO/PBX seizure cannot be used to activate Privacy Release. To activate Privacy Release from a Multiline Terminal with a CO/PBX call in progress: To Enter a Conversation using the Privacy Release from a Multiline Te r m i n a l :
Xen IPK Features and Specifications Manual Features and Specifications Manual P8 – 467 Doc. No. 8201 - Release 1.0 July 2003 Privacy Release is not allowed if a conference is in progress. To join a CO/PBX call using Privacy Release the originating CO/PBX key or CAP key must be assigned to that station. When only one station has entered via Privacy Release and feature deactivated, then the feature cannot be activated again until the joined station disconnects from conference. General Privacy Release can be activated or deactivated while a CO/PBX call is in progress. The red Conf LED flashes during Privacy Release. After Privacy Release is cancelled or all allowed parties have joined, the LED is off The Conf key LED indication for Privacy Release is the same as the indication for a conference call. When Privacy Release is activated, the Conf key LED winks on all Multiline Terminals assigned to the same Tenant as the CO line with Privacy Release, even if the CO line is assigned to multiple Tenants. If the Conf key is pressed from the same station that activated Privacy Release, the Privacy Release feature is cancelled. Holding an internal call has priority over Privacy Release. When a CO assigned as a private line is Privacy Released, the Conf key at the shared private line flashes. RELATED FEATURES LISTFeature NumberFeature Name A-4 Add-On Conference B-3 Barge-In C-17 Class of Service
July 2003 NEC Business Solutions Ltd 468 – P8Privacy Release Doc. No. 8201 - Release 1.0 July 2003 GUIDE TO FEATURE PROGRAMMING Order and Shortcut System Data NameMemory BlockFunction 1-8-07 Attendant Page-Line Key1-8-08 Station Page-Line Key ¶+BNTrunk to Tenant Assignment 2-01 ¶+BNLine Key Selection 2-05 ¶+BTTTelephone to Tenant Assignment 4-09 ¶+BNLine Key Selection for Tenant Mode 2-06 ¶+BTMLine Key Selection for Telephone Mode 4-12 One-Touch and Feature Access keys are programmable through SAT but not using system programming.
Features and Specifications Manual P9 – 469 Doc. No. 8201 - Release 1.0 July 2003 Private LinesP-9 FEATURE DESCRIPTIONThe Private Lines feature allows two outside lines to be programmed as private lines. Only a Multiline Terminal that has been programmed for the Private Lines feature can have access to these private lines. The LED status indication for the Private Lines does not appear on any other Multiline Terminal. SYSTEM AVAILABILITYTerminal Type All terminals. Required Components None. OPERATING PROCEDURES SERVICE CONDITIONS Data Assignment Two Private Lines can be specified in System Programming. Private Lines can be assigned to Single Line Telephones, but Trunk Seizure depends on Specified Line Seizure assignments in System Programming. Restrictions Last Number Redial does not access a Private Line. General The following combinations are possible: 1. Two stations with their own Private Line. 2. Two stations sharing one Private Line. 3. One station with two Private Lines. Barge-In on a Private Line is possible only if the same Private Line is shared by two terminals. Private Lines cannot be included in a conference and/or transferred except when two stations share a Private Line. Private Lines cannot be accessed by a Trunk Access Code. Not applicable.
July 2003 NEC Business Solutions Ltd 470 – P9Private Lines Doc. No. 8201 - Release 1.0 July 2003 Tie lines can be assigned as Private Lines. Private Lines cannot follow Call Forward assignments unless the destination telephones use the same Private Lines. RELATED FEATURES LIST GUIDE TO FEATURE PROGRAMMINGFeature NumberFeature Name B-3 Barge-In Order and Shortcut System Data NameMemory BlockFunction 1-8-07 Attendant Page-Line Key1-8-08 Station Page-Line Key ¶+BAAccess Code (1-, 2-, 3-Digit) Assignment1-1-46/47/ 48050,051 ¶+BCS4Private Line Assignment1-1-29 4When the system is at default this Memory Block must be programmed for the feature to be used.
Features and Specifications Manual P10 – 471 Doc. No. 8201 - Release 1.0 July 2003 Programming from Multiline TerminalP-10 FEATURE DESCRIPTIONSystem Programming can be performed from designated Multiline Terminals (with an LCD) connected to the first two ESI(8)-U( ) ETU ports. Some programming changes can be entered while the system is operating, other programming changes occur when the affected telephones and circuits are idle. SYSTEM AVAILABILITYTerminal Type Multiline Terminals (with LCD). Required Components ESIB(8)-U( ) or ESIE(8)-U( )ETU OPERATING PROCEDURES SERVICE CONDITIONS The first two Multiline Terminal ports are programming positions (default: Stations 100 and 101). Both stations can go off-line at the same time to program the system. When PC Programming is being used with the system, programming from a Multiline Terminal cannot be performed. When programming from a Multiline Terminal is being performed, PC Programming cannot be performed. GUIDE TO FEATURE PROGRAMMING Refer to the Xen IPK System Programming Manual for additional information. Order and Shortcut System Data NameMemory BlockFunction 1-8-07 Attendant Page-Line Key1-8-08 Station Page-Line Key ¶+BSCard Interface Slot Assignment 7-1 ¶+BSTelephone Type Assignment 7-2
July 2003 NEC Business Solutions Ltd 472 – P10 Programming from Multiline Terminal Doc. No. 8201 - Release 1.0 July 2003 THIS PAGE INTENTIONALLY LEFT BLANK