Konica Minolta bizhub 420 User Manual
Have a look at the manual Konica Minolta bizhub 420 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 407
Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-27
4Touch [Half Fold] or [Fold & Staple] to highlight it.
5Touch [OK].
The Basic Screen will be restored.
6Specify any necessary copy settings.
7Press [Start].
The scan/print job will start.
2
Reminder
Finisher FS-510 trays gradually go up/down while printed materials
output, depending on the tray selected.With Saddle stitcher SD-502 or
Mailbin kit MT-501, the operation of the trays become greater. DO NOT
allow any object to interfere with the...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-406.png "Page 407
Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-27
4Touch [Half Fold] or [Fold & Staple] to highlight it.
5Touch [OK].
The Basic Screen will be restored.
6Specify any necessary copy settings.
7Press [Start].
The scan/print job will start.
2
Reminder
Finisher FS-510 trays gradually go up/down while printed materials
output, depending on the tray selected.With Saddle stitcher SD-502 or
Mailbin kit MT-501, the operation of the trays become greater. DO NOT
allow any object to interfere with the...")
![Page 410
7Finishing/Folding
7-30 bizhub 500/420/360 (Phase 3)
5Select Sort or Group, and set Offset to use offset output.
– To set Sort mode, touch [Sort] to highlight it.
– To set Group mode, touch [Group] to highlight it.
– To set Sort in alternating crisscross pattern, touch [Sort] and
[Offset] to highlight them.
– To set Group in alternating crisscross pattern, touch [Group] and
[Offset] to highlight them.
6Select the desired output tray.
– Touch [Tray 1] or [Tray 2] to highlight it.
7Touch [OK].
The Basic...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-409.png "Page 410
7Finishing/Folding
7-30 bizhub 500/420/360 (Phase 3)
5Select Sort or Group, and set Offset to use offset output.
– To set Sort mode, touch [Sort] to highlight it.
– To set Group mode, touch [Group] to highlight it.
– To set Sort in alternating crisscross pattern, touch [Sort] and
[Offset] to highlight them.
– To set Group in alternating crisscross pattern, touch [Group] and
[Offset] to highlight them.
6Select the desired output tray.
– Touch [Tray 1] or [Tray 2] to highlight it.
7Touch [OK].
The Basic...")
![Page 411
Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-31
8Specify any necessary copy settings.
– Auto Paper Select may be released automatically depending on the
setting you made.
When using Sort or Group in alternating crisscross pattern, make
sure that other copy conditions do not conflict with Auto Paper
Select.
9Press [Start].
The scan/print job will start.
2
Note
To cancel changes to the settings, touch [Cancel] on the Finishing
Screen.
To cancel all settings, press [Reset].
If no other setting is...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-410.png "Page 411
Finishing/Folding7
bizhub 500/420/360 (Phase 3) 7-31
8Specify any necessary copy settings.
– Auto Paper Select may be released automatically depending on the
setting you made.
When using Sort or Group in alternating crisscross pattern, make
sure that other copy conditions do not conflict with Auto Paper
Select.
9Press [Start].
The scan/print job will start.
2
Note
To cancel changes to the settings, touch [Cancel] on the Finishing
Screen.
To cancel all settings, press [Reset].
If no other setting is...")
Finishing/Folding7 bizhub 500/420/360 (Phase 3) 7-31 8Specify any necessary copy settings. – Auto Paper Select may be released automatically depending on the setting you made. When using Sort or Group in alternating crisscross pattern, make sure that other copy conditions do not conflict with Auto Paper Select. 9Press [Start]. The scan/print job will start. 2 Note To cancel changes to the settings, touch [Cancel] on the Finishing Screen. To cancel all settings, press [Reset]. If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Basic Screen. Downloaded From ManualsPrinter.com Manuals
7Finishing/Folding 7-32 bizhub 500/420/360 (Phase 3) 7.7 Copy Conditions Incompatible with Finishing/Folding Copy Conditions Incompatible with Finish- ing/FoldingBasic DensityPaperZoom AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom FinishingSort Group Offset Crisscross,,, ,,, ,*7 *7 Shifted *6*6*6*6*6*6*6*6*6*6*6*6 Staple *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 Punch *6*6*6*6*6*6*6*6*6*6*6*6 Output Tray *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 Folding Fold & Staple *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 *6 Half Fold *6*6*6*6*6*6*6*6*6*6*6*6 Downloaded From ManualsPrinter.com Manuals
Finishing/Folding7 bizhub 500/420/360 (Phase 3) 7-33 Copy Conditions Incompatible with Finish- ing/FoldingBasic Separate Scan Combine OriginalsQualityApplication Simplex/ DuplexCom- bine PagesOriginal TextText/PhotoPhotoDot MatrixOHP InterleaveCover ModeInsert SheetInsert ImageChaptersNeg-/Pos. Reversesingle-sided-originalsdouble-sided originalssingle-sided copiesdouble-sided copies2in14in18in1Mixed OriginalOriginal Direction SettingsMargin FinishingSort Group,,, ,,,,, Offset Crisscross,,,, ,,,,, Shifted, Staple, Punch, Output Tray Folding Fold & Staple *5 *8 *8 *8,++ Half Fold *5 *8 *8 *8,++ Downloaded From ManualsPrinter.com Manuals
7Finishing/Folding 7-34 bizhub 500/420/360 (Phase 3) Copy Conditions Incompatible with Application FunctionsApplication Book Copy Booklet Pagination Image Repeat Page MarginEdit Margin EraseImage Adjustment Booklet Stamp Set RangeAuto Original Size DetectRepeatErase/Center EraseNon-Image ERaseCenteringNo RotationOriginal Size SettingCustom Size OriginalsSet NumberingPage #Date/TimeBuilt-in StampWatermark FinishingSort Group,, Offset Crisscross, , ,,, , , Shifted Staple, ,,, , , , Punch, ,,, , , , Output Tray Folding Fold & Staple+ + +++ Half Fold+ + +++ Downloaded From ManualsPrinter.com Manuals
Finishing/Folding7 bizhub 500/420/360 (Phase 3) 7-35,: Condition last selected has priority and the former selection will be released. x: Incompatible +: Condition previously selected has priority and warning message will be displayed. *5: Condition last selected has priority when Booklet is automatically selected with Half Fold or Fold & Staple in combination. *6: Varies according to the finishing option to be used. *7: Offset mode will be ignored. *8: Incompatible when Booklet is automatically selected with Half Fold or Fold & Staple in combination. Copy Conditions Incompatible with Application FunctionsApplicationFolding SortGroup Offset StaplePunchOutput TrayFold & StapleHalf FoldCrisscrossShifted FinishingSort, Group,,,, Offset Crisscrosseeeeee Shiftede, ,, Staple,e,*6,, Punche*6,, Output Traye Folding Fold & Staple,e,,, , Half Fold,e,,, , Downloaded From ManualsPrinter.com Manuals
7Finishing/Folding 7-36 bizhub 500/420/360 (Phase 3) Downloaded From ManualsPrinter.com Manuals
8Advanced Information Downloaded From ManualsPrinter.com Manuals
Advanced Information8 bizhub 500/420/360 (Phase 3) 8-3 8 Advanced Information 8.1 Checking Feature Selections by Proof Copying Use this function to produce a sample of the copied set before making multiple copies. This is a convenient and cost effective way of viewing the results of the copying selections. To make a proof copy 0Proof copy is to be made when multiple sets of copies are required from two or more sheets of the original. 1Position the original, then set the print quantity. 2Select the desired copy conditions. 3Press [Proof Copy] on the control panel. A sample copy will be output, and the screen for checking the job settings will be displayed. 4Check the sample copy. – The count display under Number of Sets on the Proof Copy Screen indicates the printed set count per specified print quantity. Downloaded From ManualsPrinter.com Manuals
8Advanced Information 8-4 bizhub 500/420/360 (Phase 3)– If the sample copy gives satisfactory result, proceed to step 9. To change any settings, proceed to the next step. 5Touch [Change Setting] on the Proof Copy Screen. The Change Setting Screen will be displayed. 6Make the setting change as desired. – The following settings can be changed from the screen after proof copying. Print Quantity Simplex/Duplex (except for the simplex/duplex original type) Finishing Folding Cover Mode Insert Sheet Chapters Page Margin Stamp/Overlay – To change the print quantity, press [C] (Clear) on the control panel, then reenter the desired value from the control panel keypad. To change the simplex/duplex copy mode, touch [1-Sided] or [2- Sided]. To make other setting changes, touch the desired key to display the setting screen for each function. – To cancel the setting change, touch [Cancel Change]. The previous setting will be restored. 7Repeat the steps 3 to 6 until the desired copy result is obtained. – If the desired setting cannot be changed, delete the current job and restart the job setting from the first step. See the next step for details. Downloaded From ManualsPrinter.com Manuals