Konica Minolta bizhub 420 User Manual
Have a look at the manual Konica Minolta bizhub 420 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 366
6Application Functions
6-124 bizhub 500/420/360 (Phase 3)
7Select additional copy conditions, as desired.
8Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
2
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
2
Note
If no other setting is desired,...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-365.png "Page 366
6Application Functions
6-124 bizhub 500/420/360 (Phase 3)
7Select additional copy conditions, as desired.
8Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
2
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
2
Note
If no other setting is desired,...")
![Page 367
Application Functions6
bizhub 500/420/360 (Phase 3) 6-125Overlay an Image onto Each Page Copied in the Job (Image Overlay)
0Separate Scan mode is automatically selected.
1Position the overlaying original.
Position the original FACE up in the document feeder or FACE DOWN
on the original glass.
2Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-366.png "Page 367
Application Functions6
bizhub 500/420/360 (Phase 3) 6-125Overlay an Image onto Each Page Copied in the Job (Image Overlay)
0Separate Scan mode is automatically selected.
1Position the overlaying original.
Position the original FACE up in the document feeder or FACE DOWN
on the original glass.
2Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals")
![Page 368
6Application Functions
6-126 bizhub 500/420/360 (Phase 3)
3Touch [Stamp/Overlay], then touch [Image Overlay] to highlight it.
– Auto Zoom and Auto Paper Select are automatically released, and
1.000 (100%) is selected as a magnification ratio.
– To specify the desired copy conditions for overlaying original, touch
[OK] to continue.
4Press [Start] on the control panel.
The original image will be scanned into memory, and the following
screen will be displayed.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-367.png "Page 368
6Application Functions
6-126 bizhub 500/420/360 (Phase 3)
3Touch [Stamp/Overlay], then touch [Image Overlay] to highlight it.
– Auto Zoom and Auto Paper Select are automatically released, and
1.000 (100%) is selected as a magnification ratio.
– To specify the desired copy conditions for overlaying original, touch
[OK] to continue.
4Press [Start] on the control panel.
The original image will be scanned into memory, and the following
screen will be displayed.
Downloaded From ManualsPrinter.com Manuals")
![Page 369
Application Functions6
bizhub 500/420/360 (Phase 3) 6-127
5Position the original to be overlaid.
6Press [Start] to scan.
– Repeat steps 5 and 6 for all originals.
7Touch [Complete Scan] on the Basic Screen.
8Press [Start].
The machine will start printing when ready for output.
2
Note
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
2
Note
If no other setting is desired, the copy...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-368.png "Page 369
Application Functions6
bizhub 500/420/360 (Phase 3) 6-127
5Position the original to be overlaid.
6Press [Start] to scan.
– Repeat steps 5 and 6 for all originals.
7Touch [Complete Scan] on the Basic Screen.
8Press [Start].
The machine will start printing when ready for output.
2
Note
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
2
Note
If no other setting is desired, the copy...")
![Page 370
6Application Functions
6-128 bizhub 500/420/360 (Phase 3)Storing Image on HDD / Overlaying Stored Image (Store Overlay)
To make a copy using the image previously stored, start with step 9.
1Position the overlaying original.
Position the original FACE up in the document feeder or FACE DOWN
on the original glass.
2Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-369.png "Page 370
6Application Functions
6-128 bizhub 500/420/360 (Phase 3)Storing Image on HDD / Overlaying Stored Image (Store Overlay)
To make a copy using the image previously stored, start with step 9.
1Position the overlaying original.
Position the original FACE up in the document feeder or FACE DOWN
on the original glass.
2Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals")
![Page 371
Application Functions6
bizhub 500/420/360 (Phase 3) 6-129
3Touch [Stamp/Overlay], then touch [Store Overlay].
The Overlaying Image Selection Screen will be displayed.
4Touch [Store Image Overlay].
The Store Image Overlay Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-370.png "Page 371
Application Functions6
bizhub 500/420/360 (Phase 3) 6-129
3Touch [Stamp/Overlay], then touch [Store Overlay].
The Overlaying Image Selection Screen will be displayed.
4Touch [Store Image Overlay].
The Store Image Overlay Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals")
![Page 372
6Application Functions
6-130 bizhub 500/420/360 (Phase 3)
5Specify the image size and registration area.
– The original size will be detected automatically. To specify the
desired size, touch [Standard Size] to select it. The registration area
will also be designated automatically. If desired, touch [Specify
One-Touch] to select the desired registration area.
6Enter the desired image name.
– Touch [Change] to display the Image Name Entry Screen. Use the
touch panel keypad to enter the desired name up...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-371.png "Page 372
6Application Functions
6-130 bizhub 500/420/360 (Phase 3)
5Specify the image size and registration area.
– The original size will be detected automatically. To specify the
desired size, touch [Standard Size] to select it. The registration area
will also be designated automatically. If desired, touch [Specify
One-Touch] to select the desired registration area.
6Enter the desired image name.
– Touch [Change] to display the Image Name Entry Screen. Use the
touch panel keypad to enter the desired name up...")
![Page 373
Application Functions6
bizhub 500/420/360 (Phase 3) 6-131– If the message Name is in use. Do you want to overwrite the
present overlay image? is displayed, the image previously
registered can be overwritten. Touching [Yes] will delete the
previous image to overwrite it with the new one. To enter a new
name, touch [No].
– If the message Name is in use. Please enter another name is
displayed, the entered name cannot be used. Touch [OK], then
repeat the procedure to enter a new name. Administrator can...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-372.png "Page 373
Application Functions6
bizhub 500/420/360 (Phase 3) 6-131– If the message Name is in use. Do you want to overwrite the
present overlay image? is displayed, the image previously
registered can be overwritten. Touching [Yes] will delete the
previous image to overwrite it with the new one. To enter a new
name, touch [No].
– If the message Name is in use. Please enter another name is
displayed, the entered name cannot be used. Touch [OK], then
repeat the procedure to enter a new name. Administrator can...")
![Page 374
6Application Functions
6-132 bizhub 500/420/360 (Phase 3)
9Position the original to be overlaid.
10Repeat steps 2 and 3 to display the Overlaying Image Selection
Screen.
11Recall the desired overlaying image.
– Touch the desired image data key to highlight it.
12Touch [OK] to restore the Application Screen.
– Select additional copy conditions, as desired.
13Press [Start].
The original to be overlaid will be scanned into memory.
14Touch [Complete Scan] on the Basic Screen.
15Press [Start].
The machine...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-373.png "Page 374
6Application Functions
6-132 bizhub 500/420/360 (Phase 3)
9Position the original to be overlaid.
10Repeat steps 2 and 3 to display the Overlaying Image Selection
Screen.
11Recall the desired overlaying image.
– Touch the desired image data key to highlight it.
12Touch [OK] to restore the Application Screen.
– Select additional copy conditions, as desired.
13Press [Start].
The original to be overlaid will be scanned into memory.
14Touch [Complete Scan] on the Basic Screen.
15Press [Start].
The machine...")
![Page 375
Application Functions6
bizhub 500/420/360 (Phase 3) 6-133
2
Note
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
2
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-374.png "Page 375
Application Functions6
bizhub 500/420/360 (Phase 3) 6-133
2
Note
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
2
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
Downloaded From ManualsPrinter.com Manuals")
Application Functions6 bizhub 500/420/360 (Phase 3) 6-129 3Touch [Stamp/Overlay], then touch [Store Overlay]. The Overlaying Image Selection Screen will be displayed. 4Touch [Store Image Overlay]. The Store Image Overlay Screen will be displayed. Downloaded From ManualsPrinter.com Manuals
6Application Functions 6-130 bizhub 500/420/360 (Phase 3) 5Specify the image size and registration area. – The original size will be detected automatically. To specify the desired size, touch [Standard Size] to select it. The registration area will also be designated automatically. If desired, touch [Specify One-Touch] to select the desired registration area. 6Enter the desired image name. – Touch [Change] to display the Image Name Entry Screen. Use the touch panel keypad to enter the desired name up to 8 characters. The date when you made this entry will be stored autommatically. – Touch [OK]. Downloaded From ManualsPrinter.com Manuals
Application Functions6 bizhub 500/420/360 (Phase 3) 6-131– If the message Name is in use. Do you want to overwrite the present overlay image? is displayed, the image previously registered can be overwritten. Touching [Yes] will delete the previous image to overwrite it with the new one. To enter a new name, touch [No]. – If the message Name is in use. Please enter another name is displayed, the entered name cannot be used. Touch [OK], then repeat the procedure to enter a new name. Administrator can specify whether to allow or restrict the Changing Image Overlay setting in the Utility mode. For details, see 6 Restrict User Access>3 Restrict Access to Job Settings on page 16-67. 7Touch [OK] to display the Stamp/Overlay Screen. 8Press [Start] on the control panel. The scanned image will be registered and the Basic Screen will be restored. Downloaded From ManualsPrinter.com Manuals
6Application Functions 6-132 bizhub 500/420/360 (Phase 3) 9Position the original to be overlaid. 10Repeat steps 2 and 3 to display the Overlaying Image Selection Screen. 11Recall the desired overlaying image. – Touch the desired image data key to highlight it. 12Touch [OK] to restore the Application Screen. – Select additional copy conditions, as desired. 13Press [Start]. The original to be overlaid will be scanned into memory. 14Touch [Complete Scan] on the Basic Screen. 15Press [Start]. The machine will start printing when ready for output. Downloaded From ManualsPrinter.com Manuals
Application Functions6 bizhub 500/420/360 (Phase 3) 6-133 2 Note To release all the application functions, touch [Reset]. To resume the initial setting for all settings including application function, press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Application Screen or Basic Screen. Downloaded From ManualsPrinter.com Manuals
6Application Functions 6-134 bizhub 500/420/360 (Phase 3) 6.16 Copy Conditions Incompatible with Application Functions Copy Conditions Incompatible with Application FunctionsBasic DensityPaperZoom AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom ApplicationOHP Interleave+++++++ Cover Mode++ Insert Sheet++ Insert Image+ Chapters *3+++ +++ + Neg-/Pos. Re- verse+ Book Copy+++ Booklet Pagination+++ Image Repeat Set Range+++ Auto Origi- nal Size Detect+++ Repeat+++ Page Margin Edit Margin Erase Erase/ Center Erase Non-Im- age Area Erase++ Image Adjustment Centering+ No Rotation Original Size Set- ting Custom Size Origi- nals++ Booklet+++ +++ +*4 *4 *4 *4 Downloaded From ManualsPrinter.com Manuals
Application Functions6 bizhub 500/420/360 (Phase 3) 6-135 Application Stamp Set Num- bering+ Page #+ Date/Time+ Built-in Stamp+ Watermark+ Copy Conditions Incompatible with Application FunctionsBasic DensityPaperZoom AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom Downloaded From ManualsPrinter.com Manuals
6Application Functions 6-136 bizhub 500/420/360 (Phase 3) Copy Conditions Incompatible with Application FunctionsBasic Separate Scan Combine OriginalsQualityApplication Simplex/ DuplexCom- bine PagesOriginal TextText/PhotoPhotoDot MatrixOHP InterleaveCover ModeInsert SheetInsert ImageChaptersNeg-/Pos. Reversesingle-sided-originalsdouble-sided originalssingle-sided copiesdouble-sided copies2in14in18in1Mixed OriginalOriginal Direction SettingsMargin ApplicationOHP Interleave+ ++++ ,,,+ Cover Mode++++ , , Insert Sheet++++ , ,+ Insert Image++++ ,,, + Chapters+ ++++ + ++ Neg-/Pos. Re- verse Book Copy+ ++++++ ++++ Booklet Pagination++++++ ++++ Image Repeat Set Range+ + ++++++ ++++++ Auto Original Size Detect+ + ++++++ ++++++ Repeat+ + ++++++ ++++++ Page Margin Edit Margin++ Erase Erase/ Center Erase++++ Non-Image Area Erase+ + ++++++ +++++ Image Adjustment Centering+ + ++++ ++++ No Rotation+++ Original Size Setting, Custom Size Origi- nals+++, + Booklet+ ++++ + + Stamp Set Numbering++ Page #+++ Date/Time++ Built-in Stamp++ Watermark++ Downloaded From ManualsPrinter.com Manuals
Application Functions6 bizhub 500/420/360 (Phase 3) 6-137 Copy Conditions Incompatible with Application FunctionsApplication Book Copy Booklet Pagination Image Repeat Page MarginEdit Margin EraseImage Adjustment Booklet Stamp Set RangeAuto Original Size DetectRepeatErase/Center EraseNon-Image ERaseCenteringNo RotationOriginal Size SettingCustom Size OriginalsSet NumberingPage #Date/TimeBuilt-in StampWatermark ApplicationOHP Interleave+++ + + Cover Mode+ + +++ + Insert Sheet+++++ ++ + + Insert Image+ + +++ + + + + Chapters+++++ ++ + Neg-/Pos. Re- verse+++ ++ +++++ Book Copy, ,,, + + + + + + Booklet Pagination, ,,, + + ++ +++ Image Repeat Set Range,, ,,+++++ ++++++ Auto Original Size Detect,,, ,+++ + ++++++++ Repeat,,,, +++++ ++++++ Page Margin+++ + + Edit Margin+++++ ++ ++ +++ Erase Erase/ Center Erase+++ + Non-Image Area Erase+, ++ +++ +++ Image Adjustment Centering+++ + , , + + + + No Rotation+ Original Size Setting,+,, Custom Size Originals, +++, , + +++ Booklet+ + ++++ + + + + + + Stamp Set Num- bering+++ Page #+ + +++ + + + + Date/Time+ + +++ + + + + Built-in Stamp+ + +++ + + + + , Watermark+++ , Downloaded From ManualsPrinter.com Manuals
6Application Functions 6-138 bizhub 500/420/360 (Phase 3),: Condition last selected has priority and the former selection will be released. +: Condition previously selected has priority and warning message will be displayed. *3: Condition last selected has priority only when Copy Insertion is selected. *4: Condition last selected has priority when recommended zoom ratio is used in Combine Originals or Booklet. Copy Conditions Incompatible with Application FunctionsFinishingFolding SortGroup Offset StaplePunchOutput TrayFold & StapleHalf FoldCrisscrossShifted ApplicationOHP Interleave++++++++ Cover Mode++ Insert Sheet++ ++ Insert Image++ Chapters++ Neg-/Pos. Reverse Book Copy+++ Booklet Pagination+++ Image Repeat Set Range+++ ++ Auto Original Size Detect+++ ++ Repeat+++ ++ Page Margin Edit Margin Erase Erase/Center Erase Non-Image Area Erase+++ Image Adjustment Centering++ No Rotation Original Size Setting Custom Size Originals Booklet++ ++ Stamp Set Numbering+ Page # Date/Time Built-in Stamp Watermark Downloaded From ManualsPrinter.com Manuals