Konica Minolta bizhub 420 User Manual

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-53
6Touch [OK].
– Touching [Cancel] will clear the entered ratio without being stored.
The XY Zoom Screen will be restored.
7Touch [OK] twice.
The Basic Screen will be restored.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-54 bizhub 500/420/360 (Phase 3)To select a magnification ratio automatically (Auto Zoom)
Use this function to automatically select an appropriate magnification ratio 
according to the original size and selected paper size.
0The full size (e1.000) mode is initially specified for Zoom as factory 
default.
0Auto Zoom and Auto Paper Select are incompatible. For details of Auto 
Paper Select, see To select paper size automatically (Auto Paper 
Select) on page 4-19.
1Touch [Zoom] on the Basic Screen.
The Zoom Screen will be displayed.
2Touch Auto Zoom to highlight it.
The Paper Screen will be displayed.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-55
3Touch the desired tray key to highlight it.
4Touch [OK].
The Basic Screen will be restored.
The appropriate magnification ratio has been selected according to the 
original size.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-56 bizhub 500/420/360 (Phase 3)
4.8 Simplex/Duplex Setting
This section describes how to make double-sided copies from the original 
scanned from the ADF or from the original glass, and also to make single-
sided copies from double-sided original.
The machine is initially set to make a single-sided copy from single-sided 
original (1%1) as factory default.
To make double-sided copies using ADF
Follow the procedure below to make double-sided copies from single-sided 
or double-sided original using the ADF.
0Specify the Original Direction according to the orientation of the original 
loaded in the ADF. For details, see Specifying Orientation of Original 
(Original Direction) on page 5-14.
0With 2%2 selected, the desired copy result may not be obtained from the 
following types of double-sided original unless the original page margin 
is specified manually.
A4 or smaller portrait-type original with top margin created
A4 or smaller landscape-type original with right/left margin created
B4 or larger portrait-type original with right/left margin createdB4 or 
larger landscape-type original with top margin created
For details, see Specifying Position of Binding Margin (Margin) on 
page 5-18.
0When selecting 1%2 or 2%2 and making double-sided copies with top 
margin created (arranged upside down on the reverse side), the binding 
direction can be specified using the [Binding Direction] key,
1Position the original in the ADF.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-57
2Touch [Simplex/Duplex] on the Basic Screen.
The Simplex/Duplex Screen will be displayed.
3Touch [1%2] or [2%2] to highlight it.
4Specify the original set direction according to the orientation of 
positioned original.
– Touch [Original Direction] to display the Original Direction Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-58 bizhub 500/420/360 (Phase 3)– Select one of the original direction key according to the orientation 
of positioned original, then touch [OK].
5Specify the binding direction of original and copy.
– The binding direction of original and double-sided copies should be 
specified manually, otherwise the desired copy result may not be 
obtained.
– Touch [Binding Direction] to display the Binding Direction Screen.
– Touch the desired key for each of the original and copy, then touch 
[OK].
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-59
6Touch [OK].
The Basic Screen will be restored.
7Select additional copy conditions, as desired.
– For details on specifying the binding margin for double-sided 
copies, see Creating Margin of Copy Image (Page Margin) on 
page 6-76.
2
Note 
If no other setting is desired, the copy job can be started using the 
settings currently specified without touching [OK] to return to the Basic 
Screen.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-60 bizhub 500/420/360 (Phase 3)To make double-sided copies using original glass
Follow the procedure below to make double-sided copies from the original 
using the original glass.
0The Separate Scan mode will function automatically.
0Specify the Original Direction according to the orientation of the original 
positioned on the original glass. For details, see Specifying Position of 
Binding Margin (Margin) on page 5-18.
1Open the ADF.
2Position the original on original glass, then close the ADF.
– Place the original FACE DOWN 
from the first page (page 1). For 
details, see To position the 
original on original glass on 
page 4-11.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-61
3Touch [Simplex/Duplex] on the Basic Screen.
The Simplex/Duplex Screen will be displayed.
4Touch [1%2] or [2%2] to highlight it.
Downloaded From ManualsPrinter.com Manuals 
						

							4Basic Copy Operations
4-62 bizhub 500/420/360 (Phase 3)
5Specify the original set direction according to the orientation of 
positioned original.
– Touch [Original Direction] to display the Original Direction Screen.
– Select one of the original direction key according to the orientation 
of positioned original, then touch [OK].
6Specify the binding direction of copy.
– The binding direction of double-sided copies should be specified, 
otherwise the desired copy result may not be obtained. Touch 
[Binding Direction] to display the Binding Direction Screen.
– Touch the desired key to highlight it, then touch [OK].
Downloaded From ManualsPrinter.com Manuals