Konica Minolta bizhub 420 User Manual
Have a look at the manual Konica Minolta bizhub 420 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 196
4Basic Copy Operations
4-68 bizhub 500/420/360 (Phase 3)
6Touch [OK].
The Basic Screen will be restored.
7Select additional copy conditions, as desired.
– For details on specifying the binding margin of double-sided
original, see Specifying Position of Binding Margin (Margin) on
page 5-18.
2
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-195.png "Page 196
4Basic Copy Operations
4-68 bizhub 500/420/360 (Phase 3)
6Touch [OK].
The Basic Screen will be restored.
7Select additional copy conditions, as desired.
– For details on specifying the binding margin of double-sided
original, see Specifying Position of Binding Margin (Margin) on
page 5-18.
2
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
Downloaded From ManualsPrinter.com Manuals")
![Page 198
4Basic Copy Operations
4-70 bizhub 500/420/360 (Phase 3)
2Touch [Separate Scan] on the Basic Screen.
3Select additional copy conditions, as desired.
4Press [Start] on the control panel.
The machine starts to scan the
original.
The original image will be scanned into memory.
When completed, the message Scanning stopped./ Press [Start] to
continue. will be displayed in the message area.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-197.png "Page 198
4Basic Copy Operations
4-70 bizhub 500/420/360 (Phase 3)
2Touch [Separate Scan] on the Basic Screen.
3Select additional copy conditions, as desired.
4Press [Start] on the control panel.
The machine starts to scan the
original.
The original image will be scanned into memory.
When completed, the message Scanning stopped./ Press [Start] to
continue. will be displayed in the message area.
Downloaded From ManualsPrinter.com Manuals")
![Page 199
Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-71
5Replace the original, then press [Start].
– Repeat steps 4 and 5 for all
original pages to be scanned.
6When all the original pages are scanned, touch [Finish]
7Press [Start] on the control panel.
All the data in memory will be output.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-198.png "Page 199
Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-71
5Replace the original, then press [Start].
– Repeat steps 4 and 5 for all
original pages to be scanned.
6When all the original pages are scanned, touch [Finish]
7Press [Start] on the control panel.
All the data in memory will be output.
Downloaded From ManualsPrinter.com Manuals")
![Page 200
4Basic Copy Operations
4-72 bizhub 500/420/360 (Phase 3)
!
Detail
To delete the scanned image data, press [Stop]. For details, see To
Stop/Resume/Delete a Job on page 4-78.
2
Note
The memory indicator in the upper-right corner of the Basic Screen
allows you to check the remainder of memory during the scanning job.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-199.png "Page 200
4Basic Copy Operations
4-72 bizhub 500/420/360 (Phase 3)
!
Detail
To delete the scanned image data, press [Stop]. For details, see To
Stop/Resume/Delete a Job on page 4-78.
2
Note
The memory indicator in the upper-right corner of the Basic Screen
allows you to check the remainder of memory during the scanning job.
Downloaded From ManualsPrinter.com Manuals")
![Page 201
Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-73
4.10 Setting Job During Warmup
Select copy conditions and start scanning during warmup, so that the
machine may start printing immediately the machine engine is ready.
To scan the original during warmup
0The machine starts warming up under the following conditions:
The sub power switch is turned on. (See Turning on the machine on
page 3-31.)
[Power Save] is pressed to release the Sleep mode. (See To interrupt the
sleep mode to activate the...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-200.png "Page 201
Basic Copy Operations4
bizhub 500/420/360 (Phase 3) 4-73
4.10 Setting Job During Warmup
Select copy conditions and start scanning during warmup, so that the
machine may start printing immediately the machine engine is ready.
To scan the original during warmup
0The machine starts warming up under the following conditions:
The sub power switch is turned on. (See Turning on the machine on
page 3-31.)
[Power Save] is pressed to release the Sleep mode. (See To interrupt the
sleep mode to activate the...")
![Page 202
4Basic Copy Operations
4-74 bizhub 500/420/360 (Phase 3)
5When scanning for more than one job, repeat the steps 2 to 4.
6Make settings and enter the print
quantity, then press [Start].
Soon after the machine completes
the warmup, printing job will start in
the job order.
!
Detail
For details on positioning the original, see Positioning the Original on
page 4-9.
For details on setting the print quantity, see Setting Print Quantity on
page 4-14.
The machine can be set to leave some settings made for...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-201.png "Page 202
4Basic Copy Operations
4-74 bizhub 500/420/360 (Phase 3)
5When scanning for more than one job, repeat the steps 2 to 4.
6Make settings and enter the print
quantity, then press [Start].
Soon after the machine completes
the warmup, printing job will start in
the job order.
!
Detail
For details on positioning the original, see Positioning the Original on
page 4-9.
For details on setting the print quantity, see Setting Print Quantity on
page 4-14.
The machine can be set to leave some settings made for...")
![Page 204
4Basic Copy Operations
4-76 bizhub 500/420/360 (Phase 3)– The Copy Operating Screen may appear when scanning for the
original is completed and printing job starts.
In this case, touch [Program Next Job] on the screen to proceed.
2Position the original for the next job.
3Select copy conditions and enter the print quantity for the next job.
4Press [Start] on the control panel.
When the current printing job is
completed, the reserved job will
automatically start printing.
5To reserve more than one job,...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-203.png "Page 204
4Basic Copy Operations
4-76 bizhub 500/420/360 (Phase 3)– The Copy Operating Screen may appear when scanning for the
original is completed and printing job starts.
In this case, touch [Program Next Job] on the screen to proceed.
2Position the original for the next job.
3Select copy conditions and enter the print quantity for the next job.
4Press [Start] on the control panel.
When the current printing job is
completed, the reserved job will
automatically start printing.
5To reserve more than one job,...")
![Page 206
4Basic Copy Operations
4-78 bizhub 500/420/360 (Phase 3)
4.12 To Stop/Resume/Delete a Job
This section describes how to stop, resume, or delete the job currently in
process (scanning, printing, or both of scanning and printing).
To stop/resume the job in process
0This procedure is effective only for the current job in process.
0The reserved job which already started scanning cannot stop its
operation. Touch [Job List] to delete the scanned data.
For details, see Job Management (Job List) on page 9-3....](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-205.png "Page 206
4Basic Copy Operations
4-78 bizhub 500/420/360 (Phase 3)
4.12 To Stop/Resume/Delete a Job
This section describes how to stop, resume, or delete the job currently in
process (scanning, printing, or both of scanning and printing).
To stop/resume the job in process
0This procedure is effective only for the current job in process.
0The reserved job which already started scanning cannot stop its
operation. Touch [Job List] to delete the scanned data.
For details, see Job Management (Job List) on page 9-3....")
Basic Copy Operations4 bizhub 500/420/360 (Phase 3) 4-73 4.10 Setting Job During Warmup Select copy conditions and start scanning during warmup, so that the machine may start printing immediately the machine engine is ready. To scan the original during warmup 0The machine starts warming up under the following conditions: The sub power switch is turned on. (See Turning on the machine on page 3-31.) [Power Save] is pressed to release the Sleep mode. (See To interrupt the sleep mode to activate the machine on page 3-39.) Weekly Timer mode is interrupted with a password entered. (See Operating the Machine During Non-Business Hours (Weekly Timer) on page 3-42.) 1Check that the message Now warming up. Ready to scan. is displayed in the message area of the Basic Screen. – The LED of the [Start] key will lights in green. 2Position the original. 3Set the desired copy conditions, and enter the print quantity. 4Press [Start] on the control panel. The original will be scanned into memory, and a print job will be on standby. Downloaded From ManualsPrinter.com Manuals
4Basic Copy Operations 4-74 bizhub 500/420/360 (Phase 3) 5When scanning for more than one job, repeat the steps 2 to 4. 6Make settings and enter the print quantity, then press [Start]. Soon after the machine completes the warmup, printing job will start in the job order. ! Detail For details on positioning the original, see Positioning the Original on page 4-9. For details on setting the print quantity, see Setting Print Quantity on page 4-14. The machine can be set to leave some settings made for the previous job in order to utilize them when scanning for the next job. For details, see page 16-93. The standby jobs can be checked for the settings, rearranged with priority in output order, and also be cancelled. For details, see Job Management (Job List) on page 9-3. To suspend the job in progress, press [Stop]. For details, see To Stop/Resume/Delete a Job on page 4-78. Downloaded From ManualsPrinter.com Manuals
Basic Copy Operations4 bizhub 500/420/360 (Phase 3) 4-75 4.11 Next Job Reservation This function allows you to set up a new job and scan the original while a current job printing is in process. The reserved job will start printing immediately the current job operation is completed. To reserve a copy job 0Up to 61 job settings including the current printing job can be made. 0The machine is initially set to accept the job reservation after the current job is finished with scanning the original and starts printing. Job reservation is unavailable while scanning for the current job is still in process. 0The Copy Operating Screen may appear when the job reservation becomes available. In this case, touch [Program Next Job] on the screen to make a job reservation. For details of the Copy Operating Screen, see 5 Copy Screen on page 15-28. 1Press [Start] on the control panel to start scanning the original. – The Scanning Original Screen will be displayed. Job reservation is unavailable as long as this screen is displayed on the touch panel. – When the original is all scanned and the machine starts printing, the Basic Screen will be restored with the message Ready to accept another job displayed in the message area. Downloaded From ManualsPrinter.com Manuals
4Basic Copy Operations 4-76 bizhub 500/420/360 (Phase 3)– The Copy Operating Screen may appear when scanning for the original is completed and printing job starts. In this case, touch [Program Next Job] on the screen to proceed. 2Position the original for the next job. 3Select copy conditions and enter the print quantity for the next job. 4Press [Start] on the control panel. When the current printing job is completed, the reserved job will automatically start printing. 5To reserve more than one job, repeat the steps from 1 to 3. Downloaded From ManualsPrinter.com Manuals
Basic Copy Operations4 bizhub 500/420/360 (Phase 3) 4-77 ! Detail For details on positioning the original, see Positioning the Original on page 4-9. For details on setting the print quantity, see Setting Print Quantity on page 4-14. The machine can be set to leave some settings made for the previous job in order to utilize them when scanning for the next job. For details, see 9 Reset Setting > 3 Job Reset on page 16-93. The standby jobs can be checked for the settings, rearranged with priority in output order, and also be cancelled. For details, see Job Management (Job List) on page 9-3. To suspend the job in progress, press Stop. For details, see To Stop/Resume/Delete a Job on page 4-78. Downloaded From ManualsPrinter.com Manuals
4Basic Copy Operations 4-78 bizhub 500/420/360 (Phase 3) 4.12 To Stop/Resume/Delete a Job This section describes how to stop, resume, or delete the job currently in process (scanning, printing, or both of scanning and printing). To stop/resume the job in process 0This procedure is effective only for the current job in process. 0The reserved job which already started scanning cannot stop its operation. Touch [Job List] to delete the scanned data. For details, see Job Management (Job List) on page 9-3. 1Press [Stop] on the control panel during scanning/printing. The scanning/printing will be suspended and the Job Stop Screen will be displayed. 2Press [Start] on the control panel. All suspended jobs will resume the operation. Downloaded From ManualsPrinter.com Manuals
Basic Copy Operations4 bizhub 500/420/360 (Phase 3) 4-79To delete a suspended job 0This procedure is effective only for suspended jobs. 0The scanned data of reserved job can be deleted by touching [Job List], to cancel printing. For details, see Job Management (Job List) on page 9-3. 1Press [Stop] on the control panel during scanning/printing. The scanning/printing will be suspended and the Job Stop Screen will be displayed. 2Touch and highlight the job to be deleted, then touch [Delete]. Selected job will be deleted. Downloaded From ManualsPrinter.com Manuals
4Basic Copy Operations 4-80 bizhub 500/420/360 (Phase 3) 4.13 Copy Conditions Incompatible with Basic Settings Copy Conditions Incompatible with Basic SettingsBasic DensityPaperZoom AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom Basic DensityAuto+, Background Removal, Density, Paper Auto Paper Select,, ,,,,,,,,,,,, , Paper Tray/Large capacity tray,, eee eee e Multiple by- pass tray,, Normaleeeeeeeeeee Recycled paper, e eeeeeeeeee OHP,e ee eeeeeeeee Label,e eee eeeeeeee Trace,e eeee eeeeeee User, eeeee eeeeee Letterhead, eeeeee eeeee Postcard,e eeeeeee eeee Thin Paper,e eeeeeeee eee Thick Paper,e eeeeeeeee ee Colored Paper, eeeeeeeeee e Envelope,e eeeeeeeeeee Downloaded From ManualsPrinter.com Manuals
Basic Copy Operations4 bizhub 500/420/360 (Phase 3) 4-81 Basic Zoom Auto Zoom, ,,,, e 1.0,, , ,,, Preset Zoom,, ,, ,, Zoom Ratio,, ,,, , Independent Zoom,,, ,,,, Simplex/Duplex single-sided originals double-sid- ed originals single-sided copies double-sid- ed copies+++ +++ + Separate Scan Copy Conditions Incompatible with Basic SettingsBasic DensityPaperZoom AtuoBackground RemovalDensityAuto Paper SelectPaper Tray/Large capacity trayMultiple bypass trayNormalRecycled PaperOHPLabelTraceUserLetterheadPostcardThin PaperThick PaperColored PaperEnvelopeAuto Zoome 1.0Preset ZoomZoom RatioIndependent Zoom Downloaded From ManualsPrinter.com Manuals
4Basic Copy Operations 4-82 bizhub 500/420/360 (Phase 3) Copy Conditions Incompatible with Basic SettingsBasic Separate Scan Combine OriginalsQualityApplication Simplex/ DuplexCom- bine PagesOriginal TextText/PhotoPhotoDot MatrixOHP InterleaveCover ModeInsert SheetInsert ImageChaptersNeg-/Pos. Reversesingle-sided originalsdouble-sided originalssingle-sided copiesdouble-sided copies2in14in18in1Mixed OriginalsOriginal Direction SettingsMargin Basic DensityAuto Background Removal Density Paper Auto Paper Select,,,*3 Paper Tray/Large capacity tray Multiple by- pass tray Normal Recycled paper OHP++ Label+++ Trace+++ User Letterhead Postcard+++ Thin Paper+++ Thick Paper+++ Colored Paper Envelope+ +++ ++++++ Downloaded From ManualsPrinter.com Manuals