Konica Minolta bizhub 420 User Manual
Have a look at the manual Konica Minolta bizhub 420 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 223
Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-7
2Touch [Combine Originals] tab on the Basic Screen.
The Combine Originals Screen will be displayed.
3Select the desired Combine Pages mode.
– When selecting [4 in 1] or [8 in 1], touch [Horizontal] or [Vertical] to
specify the direction of page arrangement.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-222.png "Page 223
Combine Originals/ Original Image Type5
bizhub 500/420/360 (Phase 3) 5-7
2Touch [Combine Originals] tab on the Basic Screen.
The Combine Originals Screen will be displayed.
3Select the desired Combine Pages mode.
– When selecting [4 in 1] or [8 in 1], touch [Horizontal] or [Vertical] to
specify the direction of page arrangement.
Downloaded From ManualsPrinter.com Manuals")
![Page 224
5Combine Originals/ Original Image Type
5-8 bizhub 500/420/360 (Phase 3)– If changing the direction of page arrangement to start from the right
side, touch [Margin] to select [Right], then touch [OK].
2
Reminder
Load copy paper of the same size as the original, if not loaded in any tray.
2
Note
To release Combine Pages, touch the highlighted key again to deselect
it, or press [Reset] on the control panel.
2
Note
If no other setting is desired, the copy job can be started using the
settings...](http://img.usermanuals.tech/thumb/2790/37208/w64_Konica_Minolta_bizhub_420-223.png "Page 224
5Combine Originals/ Original Image Type
5-8 bizhub 500/420/360 (Phase 3)– If changing the direction of page arrangement to start from the right
side, touch [Margin] to select [Right], then touch [OK].
2
Reminder
Load copy paper of the same size as the original, if not loaded in any tray.
2
Note
To release Combine Pages, touch the highlighted key again to deselect
it, or press [Reset] on the control panel.
2
Note
If no other setting is desired, the copy job can be started using the
settings...")
Combine Originals/ Original Image Type5 bizhub 500/420/360 (Phase 3) 5-5With Combine Pages specified, the machine will automatically select a recommended zoom ratio to reduce the original image for copying. The zoom ratio recommended for each setting is listed below. -2 in 1: e0.707 -4 in 1: e0.500 -8 in 1: e0.353 ! Detail The machine can be set to disable the automatic selection of recommended zoom ratio in order to accept the ratio entered manually. For details, see Auto Zoom for Combine/Booklet on page 15-38. 8 in 1 Select this setting to print eight original images onto one page. The page arrangement (Numbering Direction) can be specified. Horizontal order, left binding Horizontal order, right binding Vertical order, left binding Vertical order, right binding Setting itemDescription Downloaded From ManualsPrinter.com Manuals
5Combine Originals/ Original Image Type 5-6 bizhub 500/420/360 (Phase 3)0Load the original in the ADF. 0If the original is placed on the original glass, Separate Scan mode will function automatically. 0The tray loaded with the same paper size as the original will be automatically selected to make a copy of combined original. To use paper size different from the original size, then select the desired zoom ratio manually. 0The tray selection will accord with the order specified in Tray Priority. For details of Tray Priority setting, see 3 Paper Tray Setting > 2 Auto Tray Select Setting on page 15-15. 0With [Right] selected for the original page margin, the layout of images on copied sheet will start from right to left. For details, see Creating Margin of Copy Image (Page Margin) on page 6-76. 1Position the original. – Specify the Original Direction according to the orientation of the positioned original. For details, see Function overview on page 5-14. – When positioning the original on original glass, use the Separate Scan mode to scan the original image into memory. For details, see Separate Scan Setting on page 4-69. Downloaded From ManualsPrinter.com Manuals
Combine Originals/ Original Image Type5 bizhub 500/420/360 (Phase 3) 5-7 2Touch [Combine Originals] tab on the Basic Screen. The Combine Originals Screen will be displayed. 3Select the desired Combine Pages mode. – When selecting [4 in 1] or [8 in 1], touch [Horizontal] or [Vertical] to specify the direction of page arrangement. Downloaded From ManualsPrinter.com Manuals
5Combine Originals/ Original Image Type 5-8 bizhub 500/420/360 (Phase 3)– If changing the direction of page arrangement to start from the right side, touch [Margin] to select [Right], then touch [OK]. 2 Reminder Load copy paper of the same size as the original, if not loaded in any tray. 2 Note To release Combine Pages, touch the highlighted key again to deselect it, or press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Basic Screen. ! Detail If change the direction of paper arrangement to start from the right side, specify the margin of copy image. For details, see Creating Margin of Copy Image (Page Margin) on page 6-76 Downloaded From ManualsPrinter.com Manuals
Combine Originals/ Original Image Type5 bizhub 500/420/360 (Phase 3) 5-9 5.2 Specifying Original Settings (Original) The following procedure describes how to specify the original type, orientation of the positioned original, and page margin of the original to be copied. Copying Mixed Size Original (Mixed Original) Use the Mixed Original mode to copy the mixed size original set scanned from the ADF with Auto Paper Select or Auto Zoom activated. Function overview Setting itemDescription Auto Paper Select Used with Mixed Original for copying to paper of the same size as the original set. Auto Zoom Select Select for copying to paper of desired size with appropriate zoom ratio automatically selected for each original. Downloaded From ManualsPrinter.com Manuals
5Combine Originals/ Original Image Type 5-10 bizhub 500/420/360 (Phase 3)0Load the original in the ADF. Combination of the original sizes to be mixed depends on the widest original width (width of the ADF original guides). For details, see Positioning Original into the ADF on page 10-16. 0Adjust the paper guides to the original securely. If incorrectly loaded, the original may not be fed straight, resulting in paper misfeed or damage to the original. 0Do not load more than 80 sheets of the original, otherwise the original may be misfed or damaged, or machine trouble may be caused. If the number of original sheets exceeds 80, divide them into blocks to scan. For details, see Separate Scan Setting on page 4-69. 0If the original is placed on the original glass, scan the original referring to To position the original on original glass on page 4-11, then proceed to step 3. 0When Mixed Original is specified, Auto Paper Select will function automatically. To copy to a single and desired paper size, manually specify Auto Zoom Select. For details, see To select a magnification ratio automatically (Auto Zoom) on page 4-54. 1Arrange the mixed size original faceup, aligning the left and rear sides of each. – For the double-sided original, arrange it with the first page faceup, and align the left and rear sides of each. 2Position the original FACEUP (with the first page UP) in the ADF. – Align the left and rear sides of the original to the ADF, then adjust the paper guides. Downloaded From ManualsPrinter.com Manuals
Combine Originals/ Original Image Type5 bizhub 500/420/360 (Phase 3) 5-11 3Touch [Combine Originals] tab on the Basic Screen. The Combine Originals Screen will be displayed. 4Touch [Mixed Original] to highlight it. 2 Note To release Mixed Original, touch the highlighted key again to deselect it, or press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Basic Screen. Downloaded From ManualsPrinter.com Manuals
5Combine Originals/ Original Image Type 5-12 bizhub 500/420/360 (Phase 3)Copying Z-Folded Original (Z-Folded Original) If folded original are loaded in to the ADF to be copied, the original size is correctly detected. 0Load the original in to the ADF. 0The length of the first page of the original is detected, and all pages of the original are scanned at that size. 1Position the original to be copied. 2Touch [Combine Originals]. The Combine Original Screen will be displayed. Downloaded From ManualsPrinter.com Manuals
Combine Originals/ Original Image Type5 bizhub 500/420/360 (Phase 3) 5-13 3Touch [Z-Folded Original]. 2 Note To release Z-Folded Original, touch the highlighted key again to deselect it, or press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touch [OK] to return to the Basic Screen. Downloaded From ManualsPrinter.com Manuals
5Combine Originals/ Original Image Type 5-14 bizhub 500/420/360 (Phase 3)Specifying Orientation of Original (Original Direction) Specify the orientation of the original placed on the ADF or on original glass. Without this setting, the copy results may not be obtained as expected, especially when making copies under following conditions. -Copying from double-sided original -Making double-sided copies -Combine Pages -Booklet -Book Copy -Staple, etc. Function overview Using ADFUsing original glassIconDescription Select for the original positioned with the top toward the rear of the machine. Initially selected as factory default. Select for the original positioned with the top toward the front of the machine. Select for the original positioned in the ADF with the top toward the left side of the machine. Or, select for the original positioned on the original glass with the top toward the right side of the machine. Select for the original positioned in the ADF with the top toward the right side of the machine. Or, select for the original positioned on the original glass with the top toward the left side of the machine. Downloaded From ManualsPrinter.com Manuals