Vodavi Starplus Spd 4896 Hybrid Key Telephone System Installation Manual

							STARPLUS @ SPo 48%
Digital Key Telephone SystemINlTlAUZE DATABASE PARAMmRS
INIT. DATABASE PARAMETERS (Cont’d)
D.Initialize Station and CO Port ParametersProgramming Steps
If Group Parameters need to be initialized:
1. Press the Station/CO Port Parameters 
flex-ible button (Button 
#4). The following mes-sage will be shown on the display phone:Description
Station and CO Port parameters may be initialized
setting all stations and al! CO Lines back to their
original, default values. The following data fields are
returned to their default values upon initializing the
2.To initialize the Station/CO Port parameters,
press the HOLD button. Confirmation tone will
be heard.
II---
FliXSH 52
I-FEATUREDEFAULT VALUE
(after initializing)II
- runsI-ILc;u Lines i-lrIi
4Card Slot 
#3 - Ports 25-36
I  Card Slot 
#4 - Ports 37-48Stations 124-135
Stations 136-l 47
I
5/  Card Slot #5 - Ports 49-60IStations 148-l 59
i 6/  Card Slot 
#6 - Ports 61-72IStations 160-l 71
/7
I  Card Slot 
#7 - Ports 73-84Stations 172-l 83
I  8/  Card Slot 
#8 - Ports 85-96!
Stations 184-l 95
4
-7-----
+
/I
=jI
i
Issue 1, March 1994670-9 
						

							INITIALIZE DATABASE PARAMETERSINIT. DATABASE PARAMETERS (Cont’d)
E.Initialize Exception TablesProgramming Steps
If Exception Tables need to be initialized:
1. Press the Exception Tables flexible button
(Button 
#5). The following message will be
shown on the display phone:
STARPLUS @ SPD 4896
Digital Key Telephone SystemDescription
The Exception Table parameters including the Al-
low/Deny Tables and the Special Tables may be
initialized setting all tables to their original, default
values. The following Tables are cleared returning to
their default value uoon initializina the Exception
;PRESS HOLD
2.To initialize the Exception Tables, press the
HOLD button. Confirmation tone will be
heard.
I
PROGRAM CODEFLEX
BUTTONFEATURE/DEFAULT VALUE
~FLASH70 1
!  Allow Table - A(after initializing)
I
Table Cleared (no entries
2/  Deny Table - A
I
3!  Allow Table - B
I
I4I  Deny Table 
- B
I
/
I  
5 /Special Table 1,
!  
6Special Table 2
,
1
7 ISpecial Table 3Table Cleared (no entries)
,
Table Cleared (no entries)
/
Table Cleared (no entries)
j  Table Cleared (no entries allowed,
no area code specified)
Table Cleared (no entries allowed,
no area code specified)
j  Table Cleared (no entries allowed,
I
no area code specified)
j  
81  Special Table 4
1  (home Area Code)1  Table Cleared (no entries allowed)
9iAreaCodeTable1I
,
10/AreaCodeTable2
11AreaCodeTable3670-l 0
Issue ;, March 1994 
						

							STARPLUS @ SPD 4896
Digital Key Telephone SystemINITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
F.Initialize System Speed NumbersProgramming Steps
If System Speed bins need to be initialized:
1.Press the System Speed flexible button (But-ton 
#6). The following message will be shown
on the display phone:Description
Numbers entered into the System Speed dial Table
may be initialized clearing all bins to their original,
default value (empty). All bins 20 through 99 are
cleared returning to their default value (empty) upon
initializing the Speed Dial Table.
:PRESS HOLD
2.To initialize the System Speed bins, press theHOLD button. Confirmation tone will be
heard.
Issue 1, iblarch 1994670-l 1 
						

							INlTlALIZE DATABASE PARAMETERS
STARPLUS @ SPD 4696
Digital Key Telephone System
INlT. DATABASE PARAMETERS (Cont’d)
G. Initialize LCR Tables
Programming Steps
If LCR Tables need to be initialized:
1.Press the LCR* Tables flexible button (Button
#7). The following message will be shown on
the display phone:
PRESS HOLD:
2.To initialize the LCR* Tables, press the HOLD
button. Confirmation tone will be heard.Description
This feature is available with optional software.The 
LCR* Tables may be initialized setting all tables
to their original, default values. The following tables
will be reset to their original default value after initiali-
zation of the LCR tables:
3-Digit Table
6-Digit Table
Exception Table
Route List Table
Insert/Delete Table
Daily Start Time Table
Weekly Schedule
Toll Information Route
j  FLEX /
PROGRAM CODE /  
BUrrON jFEATUREDEFAULT VALUE
(after initializinq)
FLASH 75
1j  3-Digit Routing TableTable Cleared (no entries)
/
2/  6-Digit Routing Table/
ITable Cleared (no entries)
!
3I  Exception TableI
Table Cleared (no entries)
4j  Route List TableI
ITable Cleared (no entries)
5j  Insert/Delete TableTable Cleared (no entries)
6j  Daily Start Time TableTable Cleared (no entries)
/
7’  Weekday (Weekly) Schedulej
Table Cleared (no entries)
8i  Toll Information TableTable Cleared (no entries)
*Features available with optional software.
670-l 2Issue 1, March 1994 
						

							STARPLUS @ SPD 4696
Digital Key Telephone System
I’-:. DATABASE PARAMETERS (Cont’d)INITIALIZE DATABASE 
PARAME’IERS
l-l.Initialize System Database and Reset (all
parameters)Programming Steps
DescriptionIf System needs to be initialized:
To completely initialize the database area including
1.Press the System and Reset flexible buttonall non-programmable parameters held in Static
(Button 
#8). The following message will beRAM (SRAM) and reset the system also clearing anyshown on the display phone:meantime errors that may exist this command may
11be used. The system will require reprogramming of
any customer specific data after using this com-
mand. This provides an easy way to re-initialize the
system and clearing any meantime errors that may
have accumulated inhibiting system operation orperformance.
2.To initialize the entire system database, pressthe HOLD button. The system will perform a
hard reset.Issue 1, March 1994
670-l 3 
						

							INlTlALlZE DATABASE PARAMETERS
STARPLUS @ SPD 4696
Digital Key Telephone System
INlT. DATABASE PARAMETERS (Cont’d)
I.initialize ICLID ParametersProgramming Steps
If the 
ICLID* Table(s) need to be initialized:
1.Press the lCLlD* TABLE flexible button (But-
ton 
#9). The following message will be shown
on the display phone:
Description,‘
This feature is available with optional software.The 
ICLlD* Tables parameters may be initialized
setting all data fields to their original, default values.
2. To initialize the 
ICLID* Table(s), press the
HOLD button. Confirmation tone will be
heard.
j  FLEX /I
PROGRAM CODE j
 
BUrrON,FEATUREDEFAULT VALUE
I
1(after initializing)
FLASH 4311  ICLID* Ringing AssignmentsI
No stations are assigned
/  FLASH 561
1/  ICLID* Enable/DisableDisabled
/
2/  ICLID* Name EntryNumber is shown on LCDI
3j  ICLID* Baud Rate DisplayI2400 Baud
!
4j  
ICLID* Port Assignment!Port #l*Features available with optional software.
670-l 4
Issue 
;, March 1994 
						

							STARPLUS @ SPD 4696
Digital Key Telephone SystemINlTlALlZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
J.Initialize Directory Dialing Table
ParametersProgramming Steps
If Directory Dialing Table Parameters need to be
initialized:
1.Press the Directory Dialing Table Parameters
flexible button (Button 
#IO). The following
message will be shown on the display phone:Description
The Directory Dialing Table parameters may be
initialized setting all data fields to their original, 
de-fault values.
2. To initialize the Directory Dialing Table pa-
rameters, press the HOLD button. Confirma-
tion tone will be heard.
I
PROGRAM CODEi FLEX i
/  
BUTTON /FEATUREDEFAULT VALUE
I
(after initializing)
FLASH231Directory Dialing List
1/Bin/lCMI
12/Name Entry
/
I
3jClear Entry
4/Back Space!
FLASH551Local Number/NameTranslationTable
11Route Number
12/Phone NumberI
3j  Name!
4i  Clear Entry
Issue 1, March 1994670-l 5 
						

							STARPLUS @ SPD 4696
Digital Key Telephone SystemlNlTlALlZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS 
(Co&d)
K.Initialize Hunt Group ParametersProgramming Steps
If Group Parameters need to be initialized:
1. Press the Hunt Group Parameters flexible
button (Button 
#l 1). The following message
will be shown on the display phone:Description
Hunt Group parameters may be initialized setting all
data fields to their original, default values.
2. To initialize the Hunt Group parameters,
press the HOLD button. Confirmation tone willbe heard.
PROGRAM CODEi FLEX j
FEATURE/DEFAULT VALUE
j  
BUTTCN i
II(after initializing)
FLASH 30/  1-8 I Hunt Groups 450-457INo Hunt Groups established
I
!
9/  Station or Pilot Huntingj  All Hunt Groups default using Pilot
I
I
Hunting
670-l 6Issue 1, March 1994 
						

							STARPLUS @ SPD 4696
Digital Key Telephone System
INlTlALlZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
L.Initialize ACD or UCD Group ParametersProgramming Steps
If 
ACD’ or UCD Group Parameters need to be
initialized:
1.Press the ACD* or UCD Group Parameters
flexible button (Button 
#12). The following
message will be shown on the display phone:Description
This feature is available with optional software.
ACD’ or UCD Group parameters may be initialized
setting 
all data fields to their original, default values.
2.To initialize the ACD’ or UCD Group parame-
ters, press the HOLD button. Confirmation
tone will be heard.
PROGRAM CODE /  
BF;;N /FEATUREDEFAULT VALUE
(after initializing)
FLASH 60:  A/1-8 j  ACD*/UCD Groups 550-5571No Groups established
Al9i  Alternate ACD*/UCD Group/  No Alternates group assignments
/  Assignmentsis made
r/  AI10i  ACD*/UCD Overflow Assignment/  No Overflow assignment is made
Al11j  ACD*/UCD RAN AnnouncementI
/  Table AssignmentsNo RAN tables are specified
;  Al12j  
ACD* Supervisor ProgrammingjNo Supervisor assigned
B/l -8I  ACD*/UCD Station Assignments!No stations are assigned
FLASH 611I  ACDYJCD Ring TimerI
060seconds
2I  
ACD*/UCD Message Interval
j  Timer/
060seconds
3’  ACD*/UCD Overflow Timerj
060seconds
4i 
ACD*/UCD Wrap-Up Timer004seconds
5/  ACD*/UCD No Answer Recall000 seconds (disabled)
6i  ACD*/UCD No Answer Retryj300seconds
7;  ACD* Guaranteed Msg Timer/10 secondsFLASH 62
1-8RAN Tables 1 through 8I
No RAN parameters set
FLASH 64
A/l -8 /  ACD* Groups 558-565No ACD groups established
A/9/Alternate ACD* GroupNo ACD Alternates group
/
I  Assignmentst
assignments is made
I  
A/10j  ACD* Overflow Assignment’  No Overflow assignment is made
A/11I  ACD* RAN Announcement Table;
’  AssignmentsNo RAN tables are specified
I
I
Al12i  ACD* Supervisor Programming:
No Supervisor assigned
B/l -8i  ACD* Station AssignmentsNo stations are assigned
*Features available with optional software
Issue 1, March 1994670-I 7 
						

							INlTlALlZE DATABASE PARAMETERS
STARPLUS @ SPD 4896
Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
M.Initialize VM Group ParametersProgramming Steps
If VM* Group Parameters need to be initialized:
I.Press the VM* Group Parameters flexible 
but-ton (Button 
#13). The following message will
be shown on the display phone:Description
This feature is available with optional software.VM* Group parameters may be initialized setting all
data fields to their original, default values.
:PRESSHOLD
2.To initialize the VM” Group parameters, press
the HOLD button. Confirmation tone will be
heard.
PROGRAM CODE/
/FLEX I
FEATURE/DEFAULT VALUE
BUT-TON !(after initializing)
FLASH 65
/  l-8/  Voice Mail* Groups 
440447I
INo Voice Mail groups are
established
FLASH 66!
9/Alternate Voice Mail* Group
I
i  Assignmentsi  No Alternate VM group assignmentis made,
/
I10 /Leave TableNo outpulsing table is
referenced
I
iRetrieve TableNo outpulsing table is
I11 /
referenced
I
12 IVoice Mail * Station AssignmentsiNO stations are assigned
Il-7/  Voice Mail* Out-Pulsing Tables1Out-pulse tables are empty
, for in-band signaling/
by default
!
8I  Voice Mail* Disconnect TableIDisconnect table is empty
/  FLASH67
I
I/
1I  In-Band Digits for Incoming/
Disabled by defaultI
!
Ij  CO Calls
I
2Voice Mail* Transfer/Fonvard;Disabled by default/
,
*Features available with optional software.
670-l 8
Issue 1; March 1994