Sharp Mx2310u User Guide
Have a look at the manual Sharp Mx2310u User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 825
8-41
TROUBLESHOOTING
Contents
PROBLEMS RELATED TO PAPER FEEDING AND
OUTPUT
ProblemPoint to checkSolution
The original misfeeds
(automatic document
feeder).Is too much paper loaded in document
feeder tray?Make sure that the stack of paper in the tray is not
higher than the indicator line.
Is the original a long original?When using the automatic document feeder to scan
a long original, set the scan size to [Long Size].
(Note that long originals cannot be copied using the
copy function.)
Is the...](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-824.png "Page 825
8-41
TROUBLESHOOTING
Contents
PROBLEMS RELATED TO PAPER FEEDING AND
OUTPUT
ProblemPoint to checkSolution
The original misfeeds
(automatic document
feeder).Is too much paper loaded in document
feeder tray?Make sure that the stack of paper in the tray is not
higher than the indicator line.
Is the original a long original?When using the automatic document feeder to scan
a long original, set the scan size to [Long Size].
(Note that long originals cannot be copied using the
copy function.)
Is the...")
![Page 830
8-46
TROUBLESHOOTING
Contents
Stapling does not take
place.Is the paper type setting of the tray
selected in the printer driver set to a
paper type that cannot be stapled?Check the paper type settings in the machine and select
a tray that has paper that can be used for stapling*.
Click the [Tray Status] button in Paper Selection on
the [Paper] tab of the printer properties window and
check the paper type setting of each tray.
* Stapling is not possible on labels, tab paper,
transparency film, or...](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-829.png "Page 830
8-46
TROUBLESHOOTING
Contents
Stapling does not take
place.Is the paper type setting of the tray
selected in the printer driver set to a
paper type that cannot be stapled?Check the paper type settings in the machine and select
a tray that has paper that can be used for stapling*.
Click the [Tray Status] button in Paper Selection on
the [Paper] tab of the printer properties window and
check the paper type setting of each tray.
* Stapling is not possible on labels, tab paper,
transparency film, or...")
8-47 TROUBLESHOOTING Contents OTHER PROBLEMS ProblemPoint to checkSolution Preview images or thumbnail images do not appear.Are there a number of jobs waiting to be executed?Wait until several of the jobs have been executed. The touch panel screen is difficult to view.Is the display contrast properly adjusted?Touch the brightness adjustment key ( ) on the system bar in the touch panel to adjust the brightness. ☞1. BEFORE USING THE MACHINE SYSTEM BAR (page 1-13) You were logged out without having performed logout yourself.Did Auto Clear activate?Log in again. When user authentication is used, the currently logged in user will be automatically logged out if Auto Clear activates. (Except when in PC scan mode.) If you are the administrator, you can change the time setting of Auto Clear or disable Auto Clear in Auto Clear Setting. ➞System Settings (Administrator) > Operation Settings > Other Settings > Auto Clear Setting You forgot the administrator password.Was the administrator password changed from the factory default setting?Contact your dealer or nearest authorised service representative. For the factory default administrator password, see TO THE ADMINISTRATOR OF THE MACHINE in the Start Guide. After changing the password, take special care to remember it.
MX2010-EX-ZZ Operation Guide MX-2010U MX-2310U MODEL: