Sharp Mx2310u User Guide
Have a look at the manual Sharp Mx2310u User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 216
2-107
COPIER
Contents
CREATING A LARGE POSTER (Multi-Page
Enlargement)
This function is used to enlarge an image of an original and print it as a composite image using multiple sheets of paper.
1
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Image Edit] key.
(4) Touch the [Multi-Page Enlargement] key.
☞[Image Edit] KEY (page 2-104)
Original
(A4 (8-1/2 x 11) size)
Copy (enlarged image on 8
sheets of A3 (11 x 17) paper)](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-215.png "Page 216
2-107
COPIER
Contents
CREATING A LARGE POSTER (Multi-Page
Enlargement)
This function is used to enlarge an image of an original and print it as a composite image using multiple sheets of paper.
1
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Image Edit] key.
(4) Touch the [Multi-Page Enlargement] key.
☞[Image Edit] KEY (page 2-104)
Original
(A4 (8-1/2 x 11) size)
Copy (enlarged image on 8
sheets of A3 (11 x 17) paper)")
![Page 218
2-109
COPIER
Contents
4
Touch the [OK] key.
You will return to the special modes screen. Touch the [OK] key
to return to the base screen of copy mode.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
first original.
To...](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-217.png "Page 218
2-109
COPIER
Contents
4
Touch the [OK] key.
You will return to the special modes screen. Touch the [OK] key
to return to the base screen of copy mode.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
first original.
To...")
![Page 219
2-110
COPIER
Contents
REVERSING THE IMAGE (Mirror Image)
This feature is used to make a copy that is a mirror image of the original.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image Edit] KEY (page 2-104)
3
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is
highlighted....](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-218.png "Page 219
2-110
COPIER
Contents
REVERSING THE IMAGE (Mirror Image)
This feature is used to make a copy that is a mirror image of the original.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image Edit] KEY (page 2-104)
3
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is
highlighted....")
![Page 220
2-111
COPIER
Contents
COPYING A3 (11 x 17) ORIGINALS WITH NO EDGE
CUT-OFF (A3 (11 x 17) Full Bleed)
This feature lets you copy an entire A3 (11 x 17) size original at full size with no image cut-off at the edges.
A3W (12 x 18) size paper is used, which is slightly larger than A3 (11 x 17) size.
1
Place the original face down on the
document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image...](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-219.png "Page 220
2-111
COPIER
Contents
COPYING A3 (11 x 17) ORIGINALS WITH NO EDGE
CUT-OFF (A3 (11 x 17) Full Bleed)
This feature lets you copy an entire A3 (11 x 17) size original at full size with no image cut-off at the edges.
A3W (12 x 18) size paper is used, which is slightly larger than A3 (11 x 17) size.
1
Place the original face down on the
document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image...")
![Page 221
2-112
COPIER
Contents
4
Place A3W (12 x 18) paper in the
bypass tray.
Pull out the extension tray, adjust the guides to the width of
A3W (12 x 18) paper, and place the paper in the bypass tray.
After loading the paper, configure the bypass tray settings as
explained in MAKING COPIES USING THE BYPASS TRAY
(page 2-38).
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages...](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-220.png "Page 221
2-112
COPIER
Contents
4
Place A3W (12 x 18) paper in the
bypass tray.
Pull out the extension tray, adjust the guides to the width of
A3W (12 x 18) paper, and place the paper in the bypass tray.
After loading the paper, configure the bypass tray settings as
explained in MAKING COPIES USING THE BYPASS TRAY
(page 2-38).
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages...")
![Page 222
2-113
COPIER
Contents
COPYING IN THE CENTRE OF THE PAPER (Centring)
This is used to centre the copied image on the paper.
This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centring functionUsing the centring function
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch...](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-221.png "Page 222
2-113
COPIER
Contents
COPYING IN THE CENTRE OF THE PAPER (Centring)
This is used to centre the copied image on the paper.
This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centring functionUsing the centring function
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch...")
![Page 223
2-114
COPIER
Contents
The image can be reduced when using the centring function, but not enlarged.
When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centring...
Touch the [Centring] key in the screen of step 3 so that it is not highlighted.](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-222.png "Page 223
2-114
COPIER
Contents
The image can be reduced when using the centring function, but not enlarged.
When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centring...
Touch the [Centring] key in the screen of step 3 so that it is not highlighted.")
![Page 225
2-116
COPIER
Contents
When this function is selected, the Original Image Type setting for exposure adjustment automatically changes to Text.
This function is not available in some countries and regions.
To cancel B/W reverse...
Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted.](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-224.png "Page 225
2-116
COPIER
Contents
When this function is selected, the Original Image Type setting for exposure adjustment automatically changes to Text.
This function is not available in some countries and regions.
To cancel B/W reverse...
Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted.")
![Page 226
2-117
COPIER
Contents
[Colour Adjustments] KEY
When the [Colour Adjustments] key is touched in the 2nd special modes menu screen, the colour adjustments menu
screen opens.
Colour adjustments menu screen
(1) [RGB Adjust] key
☞ADJUSTING RED/GREEN/BLUE IN COPIES (RGB
Adjust) (page 2-118)
(2) [Sharpness] key
☞ADJUSTING THE SHARPNESS OF AN IMAGE
(Sharpness) (page 2-119)
(3) [Suppress background] key
☞WHITENING FAINT COLOURS IN COPIES
(Suppress Background) (page 2-120)(4) [Colour Balance] key
☞ADJUSTING...](http://img.usermanuals.tech/thumb/68/103099/w64_mx2310u-user-guide-1512492901_d-225.png "Page 226
2-117
COPIER
Contents
[Colour Adjustments] KEY
When the [Colour Adjustments] key is touched in the 2nd special modes menu screen, the colour adjustments menu
screen opens.
Colour adjustments menu screen
(1) [RGB Adjust] key
☞ADJUSTING RED/GREEN/BLUE IN COPIES (RGB
Adjust) (page 2-118)
(2) [Sharpness] key
☞ADJUSTING THE SHARPNESS OF AN IMAGE
(Sharpness) (page 2-119)
(3) [Suppress background] key
☞WHITENING FAINT COLOURS IN COPIES
(Suppress Background) (page 2-120)(4) [Colour Balance] key
☞ADJUSTING...")
2-112 COPIER Contents 4 Place A3W (12 x 18) paper in the bypass tray. Pull out the extension tray, adjust the guides to the width of A3W (12 x 18) paper, and place the paper in the bypass tray. After loading the paper, configure the bypass tray settings as explained in MAKING COPIES USING THE BYPASS TRAY (page 2-38). 5 Press the [COLOUR START] key or the [BLACK & WHITE START] key. Copying will begin. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.) To cancel scanning and copying... Press the [STOP] key ( ). The original must be placed on the document glass. The copy ratio is 100% when this function is used. The ratio cannot be changed. The staple and punch function cannot be used. To cancel A3 (11x17) Full Bleed... Touch the [A3 Full Bleed] or [11x17 Full Bleed] key in the screen of step 3 so that it is not highlighted.
2-113 COPIER Contents COPYING IN THE CENTRE OF THE PAPER (Centring) This is used to centre the copied image on the paper. This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the image is reduced. Not using the centring functionUsing the centring function 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Image Edit] key. ☞[Image Edit] KEY (page 2-104) 3 Select Centring. (1) Touch the [Centring] key so that it is highlighted. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [COLOUR START] key or the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original. To cancel scanning and copying... Press the [STOP] key ( ). OK Mirror Image B/W Reverse Multi-Page Enlargement Centring Photo Repeat Special Modes Image Edit A3 Full Bleed OK (1)(2)
2-114 COPIER Contents The image can be reduced when using the centring function, but not enlarged. When the original size or the paper size is displayed as a special size, this function cannot be used. To cancel centring... Touch the [Centring] key in the screen of step 3 so that it is not highlighted.
2-115 COPIER Contents REVERSING WHITE AND BLACK IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. This function can only be used for black and white copying. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Image Edit] key. ☞[Image Edit] KEY (page 2-104) 3 Select B/W Reverse. (1) Touch the [B/W Reverse] key so that it is highlighted. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. When using this function, the [COLOUR START] key cannot be used. To cancel scanning and copying... Press the [STOP] key ( ). Originals B/W Reverse copy A3 Full Bleed OK Mirror Image B/W Reverse Multi-Page Enlargement Centring Photo Repeat Special Modes Image Edit OK (1)(2)
2-116 COPIER Contents When this function is selected, the Original Image Type setting for exposure adjustment automatically changes to Text. This function is not available in some countries and regions. To cancel B/W reverse... Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted.
2-117 COPIER Contents [Colour Adjustments] KEY When the [Colour Adjustments] key is touched in the 2nd special modes menu screen, the colour adjustments menu screen opens. Colour adjustments menu screen (1) [RGB Adjust] key ☞ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) (page 2-118) (2) [Sharpness] key ☞ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness) (page 2-119) (3) [Suppress background] key ☞WHITENING FAINT COLOURS IN COPIES (Suppress Background) (page 2-120)(4) [Colour Balance] key ☞ADJUSTING THE COLOUR (Colour Balance) (page 2-122) (5) [Brightness] key ☞ADJUSTING THE BRIGHTNESS OF A COPY (Brightness) (page 2-124) (6) [Intensity] key ☞ADJUSTING THE INTENSITY OF A COPY (Intensity) (page 2-125) OK Suppress Background Intensity Sharpness BrightnessColour Balance RGB Adjust OKSpecial Modes Colour Adjustments Special Modes 22 OK Image Edit Quick FileProof Copy Colour Adjustments Slow Scan ModeOriginal CountMixed Size Original Stamp File(1) (2) (3) (4) (5) (6) When any of the functions on the colour adjustments menu is selected, the Original Image Type setting for exposure adjustment automatically changes to Text/Prtd.Photo.
2-118 COPIER Contents ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three colour components R (red), G (green), or B (blue). 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Colour Adjustments] key. (4) Touch the [RGB Adjust] key. ☞[Colour Adjustments] KEY (page 2-117) 3 Adjust red, green, or blue. (1) Touch the key of the colour that you wish to adjust: [R (Red)], [G (Green)], or [B (Blue)]. Only one colour can be adjusted. (If you adjust one colour and then adjust another colour, the adjustment of the first colour is cancelled.) (2) Adjust the selected colour. Touch the [+] key to strengthen the selected colour, or touch the [-] key to weaken the colour. (3) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [COLOUR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel an RGB adjust setting... Touch the [Cancel] key in the screen of step 3. R(Red)+ G(Green)+ B(Blue)+ OK OKCancel Colour Adjustments RGB Adjust Only one colour can be adjusted. R(Red)G(Green)B(Blue) 210-1-2 (1)(3)(2)
2-119 COPIER Contents ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness) This is used to sharpen an image or make it softer. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Colour Adjustments] key. (4) Touch the [Sharpness] key. ☞[Colour Adjustments] KEY (page 2-117) 3 Adjust the image. (1) Touch the [Soft] key or the [Sharp] key. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. 4 Press the [COLOUR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel the sharpness setting... Touch the [Cancel] key in the screen of step 3. Soft Sharp OK OKCancel Colour Adjustments Sharpness SharpSoft (1)(2)
2-120 COPIER Contents WHITENING FAINT COLOURS IN COPIES (Suppress Background) This feature is used to suppress light background areas. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 Select the special modes. (1) Touch the [Special Modes] key. (2) Touch the keys to switch through the screens. (3) Touch the [Colour Adjustments] key. (4) Touch the [Suppress Background] key. ☞[Colour Adjustments] KEY (page 2-117) 3 Select the suppress background setting. (1) Adjust the background suppression level. Touch the [+] key to suppress only faint background. Touch the [-] key to suppress faint to dark background. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. Light areas are suppressed. Level [+] Level [-] The lightness level at which suppression takes place can be adjusted. OK OKCancel Colour Adjustments Suppress Background Light areas of the original may be suppressed as background. 31 (1)(2)
2-121 COPIER Contents 4 Press the [COLOUR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel a suppress background setting... Touch the [Cancel] key in the screen of step 3.