Sharp Mx2310u User Guide

							5-38
SCANNER/INTERNET FAX
Contents
8
When Sending data has been 
completed. appears in the touch panel, 
disconnect the USB memory.
Do not disconnect the USB memory while Processing data. or Sending data. appears in the touch panel.
 When transmission to USB memory is completed, Sending data has been completed. is displayed. After a brief interval 
the message is cleared and the base screen of image send mode reappears. (The base screen of image send mode is the 
screen that appears when the [IMAGE SEND] key is touched.)
If the USB memory becomes full during scanning...
A message will appear and scanning will stop. The scanned data will not be stored. However, if the file format is set to 
JPEG and the [Specified Pages per File] checkbox is selected, files for which scanning is completed will be stored in USB 
memory.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
To cancel scanning to USB memory...
While scanned data is being stored in the USB memory, the message Sending data. and the [Cancel] key appear in the 
touch panel. To cancel the storing operation, touch the [Cancel] key.
System Settings: USB-Device Check (page 7-27)
This is used to check the connection of a USB device to the machine.
System Settings (Administrator): Scan Settings
This is used to set the default colour mode and file format.
System Settings (Administrator): Disable Scan Function
The use of PC scan mode and USB memory mode can be prohibited. 
						

							5-39
SCANNER/INTERNET FAX
Contents
SPECIFY THE FOLDER IN WHICH THE FILE WILL BE 
STORED
When sending a file to USB memory, a folder can be specified in USB memory. A new folder can also be created in USB 
memory.
If a folder is not specified, the file will be stored on the first level of the USB memory.
1
Touch the [Stored to] key.
2
Select the folder.
(1) Touch the key of the folder in which you 
wish to store the file.
If the selected folder contains another folder, you can 
select that folder. The current folder level appears in (A).
(2) Touch the [OK] key.
You will return to the base screen. The [Stored to] key will 
be highlighted.
 To create a new folder on the currently displayed level, touch the [New Folder] key. A text entry screen will appear. 
Enter a folder name and touch the [OK] key. For the procedure for entering text, see ENTERING TEXT (page 
1-67) in 1. BEFORE USING THE MACHINE.
 To move up one level, touch the   key. This key appears when a folder on the second level or lower is selected.
 To change the order of the keys that appear in a screen, touch the key that shows   or  . Each time the key is 
touched, the order changes between ascending and descending.
Specify a folder name and file name that are within the allowed number of display characters of your operating system. If the 
file name or folder name exceeds the allowed number of characters, it may not be possible to display the scanned file.
USB Mem. ScanFaxInternet FaxPC ScanScan
AutoAutoScan:Send:
AutoText
200X200dpi
PDF
Auto/GreyscaleMono2
PDF
Special Modes
Colour Mode
File Format
Resolution
Exposure
Original
File Name
Stored to
Preview
Folder Name
Stored to
Folder 1
Folder 3
Folder 4
Folder 2
CancelOK
11
New Folder\
(1)(A)(2) 
						

							5-40
SCANNER/INTERNET FAX
Contents
ENTERING A FILE NAME
The file name can be directly entered when performing a scan transmission.
Touch the [File Name] key. A text entry screen will appear. Enter the file name and touch the [OK] key. Enter the file 
name and touch the [OK] key.
 The entered file name will appear in (A).
 If the file name is not entered, the settings in the Web page are used.
 For the procedure for entering text, see ENTERING TEXT (page 1-67) in 1. BEFORE USING THE MACHINE.
USB Mem. ScanFaxInternet FaxPC ScanScan
AutoAutoScan:Send:
AutoText
200X200dpi
PDF
Auto/GreyscaleMono2
PDF
Special Modes
Colour Mode
File Format
Resolution
Exposure
Original
File Name
Stored to
(A)
Preview 
						

							5-41
SCANNER/INTERNET FAX
Contents
SENDING A FAX IN INTERNET FAX MODE
The basic procedure for sending a fax in Internet fax mode is explained below. This procedure can also be used to 
perform direct transmission by Direct SMTP.
When a default address is configured in Default Address Setting in the system settings (administrator), the mode cannot be 
changed, the destination cannot be changed, and destinations cannot be added. To switch to Internet fax mode, touch the 
[Cancel] key in the touch panel and follow the steps below.
When Default Address Setting is set to Apply E-mail address of the user for login., pressing the [Add Address] key on the 
touch panel switches to Internet fax mode.
1
Place the original.
 Place the original face up in the document feeder tray, or 
face down on the document glass.
 Do not place any objects under the original size detector. 
Closing the automatic document feeder with an object 
underneath may damage the original size detector plate and 
prevent correct detection of the document size.
Place A5 (5-1/2 x 8-1/2) size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation 
( ), an incorrect size will be detected. For an A5R (5-1/2 x 8-1/2R) size original, enter the original size manually.
Image rotation
A4, B5R, and A5R (8-1/2 x 11 and 5-1/2 x 8-1/2R) originals are rotated 90 degrees and transmitted in A4R, B5, 
or A5 (8-1/2 x 11R or 5-1/2 x 8-1/2) orientation. (A4R, B5, and A5 (8-1/2 x 11R and 5-1/2 x 8-1/2) originals 
cannot be rotated for transmission.)
 Originals cannot be scanned in succession from both the automatic document feeder and the document glass and 
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
The default setting is: rotate A4 to A4R, B5R to B5, and A5R to A5 (8-1/2 x 11 to 8-1/2 x 11R, and 5-1/2 x 8-1/2R 
to 5-1/2 x 8-1/2).
2
Specify the destination.
(1) Touch the [Address Book] key in the base 
screen.
(2) Touch the key of the desired destination.
The   icon appears in one-touch keys in which Internet 
fax addresses are stored.
(3) Touch the [To] key.
The destination is specified.
(4) Touch the [Condition Settings] key.
 After a one-touch key is touched, if the screen is changed without touching the [To] key, the destination is 
automatically specified.
 In addition to specification by a one-touch key, a destination can also be specified by a search number. You can 
also manually enter a destination or look up a destination in a global address book. For more information, see 
ENTERING DESTINATIONS (page 5-18).
Original size 
detector
Transmission
III III
GGG GGG
EEE EEE
CCC CCC
AAA AAA
JJJ JJJ
HHH HHH
FFF FFF
DDD DDD
BBB BBB
ToCc
12
51510
Global
Address Search
Address Entry
Address Review
Condition
Settings
ABCDFreq.EFGHIJKLMNOPQRSTUVWXYZetc.
Preview
Sort Address
(3)(2) (4) 
						

							5-42
SCANNER/INTERNET FAX
Contents
3
Switch to Internet fax mode and display 
the image settings screen.
(1) Touch the [Internet Fax] tab.
(2) Touch the [Original] key.
The current settings for [Original], [Exposure], [Resolution], and [File Format] are indicated at the right of each key. To 
change a setting, touch the appropriate key.
☞AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) (page 5-54), SPECIFYING 
THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce) (page 5-55), CHANGING THE EXPOSURE 
AND ORIGINAL IMAGE TYPE (page 5-61), CHANGING THE RESOLUTION (page 5-63), CHANGING THE FILE 
FORMAT (page 5-64), SPECIAL MODES (page 5-71)
4
Specify the orientation in which the 
original is placed.
When specifying the orientation of the image to be transmitted, 
specify the orientation of the original placed in step 1.
(1) Touch the appropriate orientation key.
If the top edge of the original is up, touch the   key. If 
the top edge of the original is to the left, touch the   
key.
(2) Touch the [OK] key.
You will return to the screen of step 2.
The original orientation is initially set to  . If the original was placed with the top edge up, this step is not 
necessary.
5
Press the [BLACK & WHITE START] key.
Scanning begins.

If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, 
go to step 7. To scan more pages, go to the next step.
 If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission 
will take place.
6
If the original was placed on the document glass, replace it with the next original 
and press the [BLACK & WHITE START] key.
Repeat until all originals have been scanned.
AutoAuto
Auto
File
Quick File
I-Fax Manual
Reception
Address Review
Send Settings
Address Entry
Address Book
USB Mem. ScanFaxInternet FaxPC Scan
Special Modes
File Format
Resolution
Exposure
OriginalScan:
Scan
Send:
200X100dpi
TIFF-F
A4
Preview
(1)(2)
Internet Fax/OriginalOK
AutoAuto     A4Scan Size
2-Sided
Tablet2-Sided
Booklet
Send Size100%
Image Orientation
(2)(1) 
						

							5-43
SCANNER/INTERNET FAX
Contents
7
Touch the [Read-End] key.
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
 If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the 
transmission is reserved.
 The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original 
page scanned. However, when 2in1 or Card Shot is selected in the special modes, only the exposure can be 
changed when scanning an even-numbered original page.
 When all originals have been scanned, Job stored. will be displayed together with a job control number. This number can 
be used to locate the job in the Transaction Report or in the Image Sending Activity Report. If the job is a broadcast 
transmission, this number will also appear in the key of the job in the job status screen. For this reason, making a note of 
the number is useful for checking the result.
 If the memory becomes full while the originals are being scanned, a message will appear and scanning will stop.
Storing a mail signature
You can have preset text automatically added at the end of e-mail messages as a mail signature. This is convenient when 
you wish to have a corporate policy or other preset text appear at the bottom of e-mail messages. To store the text for the 
mail signature, click [Application Settings], [Network Scanner Settings] and then [Administration Settings] in the Web page 
menu. (Administrator rights are required.) Up to 900 characters can be entered. (The mail signature is not included in the 
maximum number of characters that can be entered in the e-mail message.) 
Use Pre-Setting Mail Signature in the system settings (administrator) to specify whether or not a mail signature is added.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
System Settings (Administrator): I-Fax Send Settings
This is used to select Internet fax transmission settings such as the receive report setting, rotation setting, size restriction 
setting, and sender information attachment setting.
System Settings (Administrator): Pre-Setting Mail Signature
Use this setting to specify whether or not a mail signature is added at the end of e-mail messages. By factory default, a 
mail signature is not added.
Read-EndConfigure
Place next original.       (Pg.No.x)
Press [Start].
When finished, press [Read-End]. 
						

							5-44
SCANNER/INTERNET FAX
Contents
CHANGING THE SUBJECT, FILE NAME, AND BODY 
TEXT
The subject, file name, and body text can be changed when performing an Internet fax transmission. Preset items can 
be selected or text can be directly entered.
To change the body text, the hard disk drive is required.
 If the subject and file name are not changed, the settings in the Web page are used.
 Selections for the subject, file name, and body text are configured by clicking [Application Settings] and then [Network 
Scanner Settings] in the Web page menu. 
 For the procedure for entering text, see ENTERING TEXT (page 1-67) in 1. BEFORE USING THE MACHINE.
1
Touch the [Send Settings] key in the base screen.
☞
BASE SCREEN (page 5-9)
2
To change the subject, touch the 
[Subject] key.
3
Enter the subject.
(1) Touch a pre-set text key.
(2) Touch the [OK] key.
 If you wish to directly enter the text, touch the [Direct Entry] key to open the text entry screen. Enter the text and 
touch the [OK] key.
 The text in a pre-set text key can be edited by touching the pre-set text key and then the [Direct Entry] key. The text 
entry screen will appear with the selected pre-set text entered. (When a destination is stored using the Web page, 
up to 80 characters can be entered. However, only 54 characters can be entered in the touch panel.)
Send SettingsOK
Subject
File Name
Body Text
No.01 Sub: Schedule coordinationNo.02 Sub: Monthly Schedule
No.04
No.06No.05
No.08No.07
No.10No.09
No.12No.11
No.03 Sub: Minutes of planning m
SubjectOKCancel
Direct Entry
15
(2)(1) 
						

							5-45
SCANNER/INTERNET FAX
Contents
4
To change the file name, touch the [File 
Name] key.
The file name is entered in the same way as the subject.
5
To change the body text, touch the 
[Body Text] key.
6
Enter the body text and touch the [OK] 
key.
 To select a pre-set message previously stored in the Web 
page, touch the [Pre-Set Select] key.
 To directly enter the message, touch the [Edit] key.
 1800 characters can be entered. (A line break counts as one character.)
 To clear all entered text, touch the [Clear All] key. When this key is touched, the entire body of the message is 
erased immediately; not just the selected line.
 Each line of the entered text can be selected with the   keys. To edit the selected line, touch the [Edit] key. 
The text entry screen will appear with the selected text entered.
Send SettingsOK
Subject
File Name
Body Text
Sub: Schedule coordination meeting
Sub: Schedule coordination meeting
Material for planning meeting
Send SettingsOK
Subject
File Name
Body Text
Body Entry
Thank you for your continuous support. We have attached scanned data,
which you have requested.
Clear AllOK
EditPre-Set Select 
						

							5-46
SCANNER/INTERNET FAX
Contents
7
Touch the [OK] key.
When storing pre-set text for the subject and file name in the Web pages, up to 80 characters can be entered.
System Settings (Administrator): The Number of File Name/Subject/Body Keys Displayed Setting
The setting for the number of subject keys and file name keys displayed in one screen can be changed to 6, 12, or 18.
Sub: Schedule coordination meeting
Material for planning meeting
Thank you for your continuous support. We have attached sca 
Send SettingsOK
Subject
File Name
Body Text 
						

							5-47
SCANNER/INTERNET FAX
Contents
SENDING THE SAME IMAGE TO MULTIPLE 
DESTINATIONS (Broadcast Transmission)
The same scanned image can be sent to multiple scan modes, Internet fax mode, and fax mode destinations in a single 
operation. Up to 500 destinations can be selected in one broadcast operation.
If you frequently use broadcasting to send images to the same group of destinations, it is convenient to store those 
destinations in a group key.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
OriginalsTransmission