Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System Section 300 Installation Guide
Panasonic Digital Business System Section 300 Installation Guide
Have a look at the manual Panasonic Digital Business System Section 300 Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix A FFl-2#-2W- -9#-(0 or l)# -lO#-(0 or l)# FFl-2#-3W- - Default SB%DR and Data 0 Dump data mode (Xon/Xoff) 1 PAI baud rate switch PBX Access and Pauses I I I -(l to a)#-(00 to 99) or (Ok to 9k)# - PBX access code (00 to 99) or (Ok to 9k) 49 to 18)#-(1 to 3)# See FF!&l% - Automatic pause after dialing (0 to 9) FFl-2#-4#- I I UNA and EPI I -1%(0 or 1)8 See FF4-1#.2# -(2 to 9)#-(0 or l)# FFl-2#-5#- Universal Night Answer (UNA) ring pattern External Page Interface (EPI) groups (00 to 07) 0 0 I cos I -(l to 8)#-(1 to 20)#-(0 or l)# I O I Class of Service setting FFl-2#-6#- I Account Codes I -(l to lOO)#-l#-(OOOl-9999)# - Verified Forced Account Codes -(l to lOO)#-2#-(0 to 7)# 0 Verified Forced Account Code toll restriction FFl-3#- System Timers/Night Switch/Conf. - l#-(0000 to 2359)# -2#-(0 or 1 to 12)# 1 -3#-(0 or 1 to 12)# 7 -4#-(0 or 1 to 12)# 1 -5#-(0 or 1 to 12)# 7 -6%(0 or 1 to 12)# 1‘ - -7iWO or 1 to -a#-CO or 1 12)# to 12)# 7 1 -9#-(0 or 1 to 12)# 7 -lO#-(0 or 1 to 12)# 9 Automatic switch to night mode Attendant HOLD-recall timer Extension HOLD-recall tfmer Attendant transfer-recall timer Extension transfer-recall timer Attendant Hunt-Groun recall timer Extension Hunt-Group recall timer Attendant park-hold recall timer Extension park-hold recall timer Attendant reversion timer Unsupervised conference ta.Ik time Automatic pause timer CO-line FLASH timer SLT on-hook FLASH Incoming ring timer Ring signal delay timer Dial pause timer PBX FLASH timer Call forward/no answer timer Outbound ground detection tlrner Incoming ground detection timer Attendant mtercom HOLD-recall timer A P R e n d i x A
Appendix A e n d i x -23#-(0 or 1 to 12)# -24#. 40 or 1 to 12)# -25#-(0 or 1 to 12)# -26#-(0 to 15)# 1 -27#-(0 to 15)# f -28#-(0 to 15)# -29#-(HHMM)# Extension intercom HOLD-recall timer Attendant intercom transfer-recall timer I I 7 I 1 7 Extension intercom transfer-recall timer 2 CO delayed ringing timer 2 EXT. delayed ringing timer 2 Hunt Group no answer e Auto Day Mode I I A 1 FFl-4#- Remote Maintenance Code I I -(4 digits)# I 9999 Set four digits Also used with DISA I 1 FFl-BW- DISA ID Code Set four digits See Fl%!-ll#. 19#. 20# -(4 digits)# / FFl-6#- DISA Code for Outgoing Calls -l#-(0000 to 9999)# 1111 -2#-(0000 to 9999)# 9999 _, ( Code 1. set four dieits See FF2-11#.19#.20# Code 2. set four digits See FF2-11#,19#,20# FFl-7#- System Programming ID Code Set four digits -(4 digits) # FFl-8#-l# 9999 DID I 0 -(O or l)# DID reset DID/T1 reset I 0 FFl-8#-2W 40 or l)# 0 DID Confirm Confirmation of DID reset FFl-8W-4# Sync sources/System Timers -l#-l#-(0 to 8)# -l#-2#-(1 to 3)# - l#-3#-(0 to 3)# -l#-4#-(0 to 3)# -2#- l#-(0 to 25)# -2#-2#-(0 to 15)# 0 System size 3 Sync setting for first sync source 0 Sync setting for second sync source 0 Sync setting for third sync source 2s Network sync source recovery timer 1 Disconnect timer 76
Appendix A FFl-SW-4# Default Sync sources/System Timers -2#-3#-(0 to 15)# -2#-4#-(0 to 15)# -2#-5#-(0 to 8)# -2#-6#-(0 to 15)# -2#-7#-(0 to 15)# -2#-8#-(0 to 8)# -2#-9#-(0 to 15)# -2#-10%(0 to 15)# -3#-(1 to S)#-(1 to 8)#-(0 to 30)# -4#-l#-l#-(0 to l)# -4#- l #-2#-(0 to 24)# -4#- l#-3#-(0 to l)# -4#-l#-4#-(0 to l)# -4% l#-5#-(0 to l)# -4#-l#-6#-(0 to l)# -4#-l#-7#-(0 to l)# -4%2#- l#-(0 to 15)# -4#-2#-2#-(0 to 15)# -4#-2#-3#-(0 to 15)# -4#-2#-4#-(0 to 15)# -4#-2#-5#-(0 to 15)# -4#-2#-6#-(0 to 151# -4#-3#- l#-(0 to 9000)# -4#-3#-2#-(0 to 9000)# -4#-3#-3#-(0 to l)# -4#-3#-4#-(0 to 9000)# -4#-3#-5#-(0 to 9000)# -4#-3#-6%(0 to 9000)# -(4 or 5)#-4#- l#-(0 to l)# -(4 or 5)#-4#-2#-(0 to l)# -4#-4#-3#-(0 to l)# -(4 or 5)#-4#-4#-(0 to l)# -(4 or 5)#-4#-5#-(0 to l)# -4#-4#-6#-(0 to l)# -5#-l#-l#-(0 to l)# -5#- l#-2#-(0 to 24)# -5#- l#-3#-(0 to 1)# 3 9 2 15 7 3 3 3 - 0 0 1 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 Guard timer Release acknowledge timer Outpulse delay timer Wink signal start detection timer Incoming Detection timer Answer Supervision timer Glare‘timer - immediate start Glare timer - wink start Digital pads (loss/gain settings) Trunk class (Master Cabinet) Number of channels used (Master Cabinet) Frame format (Master Cabinet) Clear Channel format (Master Cabinet) Failure Mode (Master Cab) Remote loopback detect-ton (Master Cabinet) Yellow alarm send (Master Cabinet) Red alarm detection timer (Master Cabinet) Red alarm recovery det timer (Master Cabinet) Yellow alarm detection timer (Master Cabinet) Yellow alarm recov det timer (Master Cabinet) Other alarms detection timer (Master Cabinet: Other alarms recov det timer (Master Cabinet) Frame loss counter (Master Cabinet) Slip counter (Master Cabinet) Red alarm counter (Master Cabinet) Loss Signal counter (Master Cabinet) Sync-loss counter (Master Cabinet) Yellow alarm counter (Master Cabinet) Yellow alarm relay control Red alarm relay control Loss relay (Master Cabinet) Frame loss AIS relay Alarm relay reset (Master Cabinet) Trunk class (Slave Cabinet) Number of channels used (Slave Cabinet) Frame format (Slave Cabinet) A P- P e n d i X A 7 I-
Appendix A A / .. P P e xl d i X A f- I’ 78 Default Sync sources/System Timers 0 0 0 1 1 1 1 1 1 1 1 0 0 3 0 0 0 0 1 1 0 0 0 0 - Clear channel format (Slave Cabinet) Failure mode (Slave Cabinet) Remote loopback detection (Slave Cabinet) Yellow alarm notlficatlon (Slave Cabinet) Red alarm detection timer (Slave Cabinet) Red alarm recovery det timer (Slave Cabinet) Yellow alarm detectton timer (Slave Cabinet) Yellow alarm recov det timer (Slave Cabinet) Other alarms detection timer (Slave Cabinet) Other alarms recov det timer (Slave Cabinet) Frame loss counter (Slave Cabinet) Slip counter (Slave Cabinet) Red alarm notification (Slave Cabinet) boss signal counter (Slave Cabinet) Sync-loss counter (Slave Cabinet) Yellow alarm counter (Slave Cabinet) Loss relay (Slave Cabinet) Alarm relay reset (Slave Cabinet) Trunk type DID/DNIS settings Outgolm? tvoe Incomine tvoe Trunk mode Robbing bit setting Incoming dialing method Dial tone transmission Busy tone transmission Dial tone generation Rlngback transmission DNIS number setting -5#-l#-6#-(0 to l)# -5#-2#- 1 #-(0 to 15)# -5#-2#-2#-(0 to 15)# -5#-2#-3%(0 to 15)# -5#-2%4#-(0 to 15)# -5#-2#-5#-(0 to 15)# -5#-2#-6#-(0 to 15)# -5#-3#-2#-(0 to 9000)# -5#-3#-3#-(0 to l)# -5#-3#-6#-(0 to 9000)# -5#-4#-3#-(0 to l)# -5#-4%6#-(0 to l)# -6#-(1 to 64)#-l#-(0 to 3)# -6#-(1 to 64)#-2#-(0 to 2)# -SW1 to 64)#-3#-(0 to 2)# -6#-(1 to 64)#-4#-(0 to l)# -6#-(1 to 64)#-5#-(0 to 2)# -6+(1 to 64)#-6#-(0 to l)# -6#-(1 to 64)#-7#-(0 to l)# -6#-(1 to 64)#-8#-(0 to l)# -6+(1 to 64)#-9#-(0 to I)# -6#-(1 to 64)#-lO#-(0 to l)# -6#-(1 to 64)#-1 I#-(0 to l)# -7t-(0 to 9999)#-(10 to 69 or 100 to 699)R Alarm Counter FFl-8#-51 -3#-3#-(0 to 9000)# FFl-8#-8# -7t-(0 to 9999)#-( 10 to 69 or 100 to 6991t Red alarm counter Dialing Assignment DID dialing assignment
Appendix A i ! i FF2-(01-64)#- Default Trunk Programming -l#-(0 or l)# 0 Denies trunk use -2#-(0 or I)# 0 Pulse or DTMF dial type -3#-(0 or l)# 1 Pooled-trunk-group access 9 -(4 to 9)#-(0 or l)# 0 Pooled-trunk-group access 81 to 86 -lO#-(1 or 2)# 1 Trunk type -ll#-(dor l)# ’ ^ 0 Enables DISA -12#-(001 to 144)# Private-he port number -13#-(0 or l)# 1 Automatic pause -14#-(0 or l)# 0 Dial-tone detection -15#-(1 to 3)# 1 IYMF signal sending time -16#-(0 or l)# 0 Unsupervised conference (trunk capability) -17#-(0 or 1 to 9)# 0 Incoming ring signal pattern -18#-(0 or 1 to 15)# 7 Trunk disconnect timer - 19#-(HHMM) DISA start time -20#-(HHMM) DISA end time -21#-(0 to 2)# 0 Loop-start. ground-start or DID trunk card -2 1 #-(0 to 3)# 0 Trunk selectfon -22#-(0 or l)# 0 DID - immediate or Wink start -23#-(0 to 15)# 3 Wink-start timer -24#-(0 or 1 to 15)# 4 Digit dial time-out -25#-(0 to 15)# 5 DID interdigit dial time-out -26#-(4 to 6 or 13)# a Tl port class - trunk A P P e n d i X A
Appendix A FF3-(001-144)#- -l#-(10 to 69/100 to 699)# -2%(0 or 1 to 19)# -3#-(001 to 144)# -4#-(0 or l)# -5th(0 or I)# -S#-(0000 to 9999)# -7#-(0 or l)# Portsl- Ports2to144- -8#-(0 or l)# -9#-(0 or l)# -lO#-(0 or l)# -1 l#-(0 or l)# -12#-(0 or l)# -13#-(0 or l)# -14#-(0 or l)# -15#-(0 or 1 to 4)# -16#-(0 or l)# -17#-(0 or l)# -(18 to 25)#-(0 or l)# -26#-(0 or 1 to 24)# -27#-(0 or 1 to 24)# -28#-(0 or 1 to 24)# -29#-(0 or 1 to 24)# -3O#-(0 or 1 to 24)# -31%(0 or 1 to 24)# -32#-(0 or 1 to 24)# -33#-(0 or 1 to 24)# -34#-(0 or l)# -35#-(0000 to 9999)# -36#-(0 to 2)# -37#-( 1 to 3 or 7 to 13)# -38#-(0 or l)# -39#-(0 to 9)# -4O#-(0 or l)# -4 1 #-(000 1 to 9999)# -42#-(0 to 3)# -43%(NN(N)) -44#-(0 or l)# Default 100 to 699 0 0 1 0 1 0 1 0 1 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - Extension Port Specifications Extension number Telephone types EM/24 console station port number Forced LCR restriction Forced verified account code Station lockout code CO-line off-hook signal for off-hook voice announce Call waiting Busy override Busy overridden Prime-line pick up Automatic pickup for a ringing line Unsupervised conference (ext. capabilib SMDR printout by incoming call CO off-hook signal volume CO off-hook signal pattern PSD name large-screen display (5 or 10) Sets extensions to page groups (00 to Oi Idle screen on the large-display phone [DT display on the large-screen phone [DT display on the large-screen phone CO-line display on display while dialing CO-line-call on large-screen after dialin Page-call display on large-screen phone Call-wait display on large-screen phone Intercom-busy-tone display on large- screen phone Extension-directory display on the large-screen phone (5 or 10 names) DID outside extension number Ringback tone with busy signal Tl port class station SLT hook flash Extension ring pattern D-SLT handset volume level Auto set relocation codes Permanent call forward Permanent call forward extension ML/MC0 Separation 3 1 P e n d i X A f ! .-. 80
Appendix A FF4-l#- 1 Default 1 Incoming Ring Assignment -(OOl to 144)#-(01 to 64)#-(0 or l)# Ports 1 at 2- 1 Port83to144- 0 DayUme ring FF4- 1 #- Hunt-Group Day Ring Tables -(151 to 158)#-(01 to 64)#-(0 or l)# I I 0 FUng signal for pilot number and CO line FF4-2#- Incoming CO-Line Call Table -(OOl to 144)#-(01 to 64)#-(0 or l)# Ports l&k 2- 1 Ports 3 to 144- 0 Nighttime ring FF4-2#- Hunt-Group Night Tables -(151 to 158)#-(01 to 64)#-(0 or l)# I 0 I F&g signal for pilot number and CO lin FF4-3#-(1 to 8)#- Hunt Groups -1%(11 to 69/101 to 699)# -2%(0 to 2)# 0 -3#-(10 to 69/100 to 699)# -4#-(2 to 32)# 2 -15 to 12)#-(11 to 69/101 to 699)# i Pilot extension number Search method Transfer extension number Transfer timer Hunt-group extension numbers FFQ-4#- Call-Coverage Groups (16) -l#-(1 to 8)#-(lo/69 to 100/699)# -(3 to lS)#-( 1 to 8)#-( lo/69 to 100/699)# First~coverine extension Second covering extension Other covering extensions FM-5#- Day Delayed-Ring Tables -(OOl to 145)#-(01 to 64)#-(0 or l)# 0 Daytime delayed-ring tables FF4-5#- Hunt-Group tiay Delayed Ring -151 to 158)#-(01 to 64)#-(0 or l)# 0 Ring signal for pilot number and CO lir
Appendix A FF4-6#- 1 Night Delayed-Ring Tables -(OOl to 145W(01 to 64)#-(0 or l)# I I 0 Night delayed-ring tables FF4-6#- Hunt-Group Night-Delayed -(151 to 158)#-(01 to 64)#-(0 or l)# I I 0 Signal for pilot number and CO line FF4-7#- Extension Ring Tables -(OOl to 144)#-(001 to 144)#-(0 or l)# FF4-8#- -(OOl to 144)#-(001 to 144)#-(0 or l)# 0 intercom ring signal Ert Delayed-Ring Tables I I 0 Intercom ring signal Reminder: 82 DEFAULTS Record changes to the ring default on the Extension Summary form and the Hunt group Tables form found elsewhere in this manual. An extension can only be a member of either a Hunt Group x a Coverage Group. A 4 I? e n d i X A
Appendix A ~~ - I FF5-(001 to 144)#- Extensions -(01 to 24)#-CONF-(PROGlO to 69/100 to 699)# EL keys _- : -(Ol to 24)#-COl’W(81 to 86. 89)W ML keys . FF keys - (01 to 24) 01 to 24 Default -(Ol to 24)#-CONF-(PROGPROG-6 di&tsJ# Aw key FF keys - (01 to 24) I Default I -(Ol to 24)#-CONF-(6 dieits)# Pre-programmed codes (See FF-Key Code Chart) 01 to 24 I A P 0 e n d i X A 8:
Appendi% A FFS-(145 to 148)#- DSS/72/BLF Consoles -(Ol to 24)#-CONF-(81 to 86. 89)# MC0 keys 1 FF keys - (01 to 24) Default -01 to 24 -(Ol to 72)#-CONF-(PROGlO to SS/lOO to 699)# DSS keys I FF keys - (01 to 72) 01 to 56- 57 to 64- 65 to 71- 72- Pre-programmed codes (See FF-Key Code Chart] I Default r-- 01 to 72 I - I , 84 Default 100 to 155 - Extensions 7500 to 7507 - Park hold #OO to #06 - Page zones #52 - Day/Night -(Ol to 72)#-CONF-(PROGPROG6 dis!its)# -(Ol to 72)#-CONF-(6 ditits)# 1 FFkeys-(01 to72) 1 A / i e n d i x A /